[Fri Feb 17 16:10:00 2012] Detection parameters:
  Position = (325.1, 416.9) = 5 34 28.05 22 8 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.4 +/- 26.9
  Background counts = 318.7
  Rate = 0.02 +/- 0.005

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 8.81'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Feb 17 16:12:47 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.83"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Feb 17 18:40:58 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Feb 17 22:57:26 2012] Source 30 is offset by -4.327395 and -5.641813 pixels which is larger than
2 X fitted extent = 1.302285 x 1.302285, not incorporating fit results
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 3798.990000, observed total counts = 3798.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 30 = 1.179726 pixels
[Fri Feb 17 22:57:26 2012] 3650.938000 total counts/ 3516.550000 bgd. counts: snr = 2.266220
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.179726 pixels
  Position = (326.1, 416.3) = 5 34 27.75 22 8 4.1
  Extent = 10.0 (5.9-21.7)", rotation angle = 0
  Source counts = 134.4 +/- 60.4
  Background counts = 3516.6
  Rate = 0.02 +/- 0.009
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 29
[Fri Feb 17 22:57:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Fri Feb 17 22:57:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.156
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.96"
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25.csv
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25.csv
[Sat Feb 18 02:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:30 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Feb 18 02:30:30 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Feb 18 02:30:30 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Feb 18 06:36:16 2012] Warning, spatial fit 25 centroid is now closest to src. 27
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(28318.271200, 36166.103600, 597.838817, 597.838817, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (292, 382) - (360, 451)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(28318.271200, 36166.103600, 996.398029, 1992.796057, X, Y) && !ellipse(28363.854000, 34196.597000, 1239.080036, 1239.080036, 0.000000, X, Y) && !ellipse(26763.339000, 34210.606000, 1612.392046, 1612.392046, 0.000000, X, Y) && !ellipse(27965.354000, 34764.426000, 1664.192048, 1664.192048, 0.000000, X, Y) && !ellipse(30776.878662, 34087.562134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27826.816000, 34704.605800, 1107.232032, 1107.232032, 0.000000, X, Y) && !ellipse(25597.442200, 34279.985382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30109.630000, 34140.118000, 1670.184048, 1670.184048, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y) && !ellipse(27523.065800, 35966.244200, 966.192028, 966.192028, 0.000000, X, Y) && !ellipse(26901.433289, 34617.182068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.547058, 34551.894897, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30.gif
[Sat Feb 18 06:56:28 2012] Mean detx,y = (8930.18, 502.97) 
[Sat Feb 18 06:56:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:56:37 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:56:37 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Feb 18 06:56:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Feb 18 10:10:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:57 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Feb 18 10:10:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:59 2012] Using photon index=1.80, rate=0.019, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src30.arf
[Sat Feb 18 10:10:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:59 2012] Updating source flux to 3.4e-13
[Sat Feb 18 10:11:07 2012] Flag b found in src. 30 procflags, skipping spectral fitting
[Sat Feb 18 10:11:07 2012] Flag c found in src. 30 procflags, skipping spectral fitting