[Fri Feb 17 16:10:00 2012] Detection parameters:
  Position = (312.2, 452.9) = 5 34 32.10 22 10 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.3 +/- 23.1
  Background counts = 167.6
  Rate = 0.01 +/- 0.003

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 11.25'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Fri Feb 17 16:12:47 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.841
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.05"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Feb 17 18:40:58 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Feb 17 22:57:26 2012] Source 26 is offset by 4.543245 and -4.435030 pixels which is larger than
2 X fitted extent = 1.359545 x 1.359545, not incorporating fit results
[Fri Feb 17 22:57:26 2012] Source 26 is offset by 4.145406 and -0.080180 pixels which is larger than
2 X fitted extent = 1.434814 x 1.434814, not incorporating fit results
[Fri Feb 17 22:57:26 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.772336 pixels away
[Fri Feb 17 22:57:26 2012] Source 26 is offset by 1.797613 and 4.491154 pixels which is larger than
2 X fitted extent = 1.330441 x 1.330441, not incorporating fit results
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 20
[Fri Feb 17 22:57:47 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Fri Feb 17 22:57:47 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.841
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.05"
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src21.ximg exists
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Feb 18 02:30:29 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src21 appears to have run properly
[Sat Feb 18 02:30:30 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Feb 18 02:30:30 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Feb 18 02:30:30 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Feb 18 06:36:16 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 15.769146 pixels away
[Sat Feb 18 06:36:16 2012] Source 26 is offset by 1.452625 and 3.560326 pixels which is larger than
2 X fitted extent = 1.512322 x 1.512322, not incorporating fit results
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(27110.020355, 39357.394379, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (275, 415) - (350, 490)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(27110.020355, 39357.394379, 1087.500000, 2175.000000, X, Y) && !ellipse(27869.164800, 41437.064000, 2072.856060, 2072.856060, 0.000000, X, Y) && !ellipse(28380.653656, 40150.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.448608, 41639.710663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.741394, 40322.752411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.272186, 39616.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.498600, 39292.778000, 958.280028, 958.280028, 0.000000, X, Y) && !ellipse(27759.241394, 41967.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.271600, 42698.616000, 2181.576063, 433.568812, 105.830800, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26.gif
[Sat Feb 18 06:55:38 2012] Mean detx,y = (12073.85, -776.31) 
[Sat Feb 18 06:55:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:55:48 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:55:48 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Feb 18 06:55:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Feb 18 07:28:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Feb 18 07:28:39 2012] rmf not generated due to insufficient counts
[Sat Feb 18 10:10:57 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:57 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Feb 18 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:58 2012] Using photon index=1.80, rate=0.0145, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src26.arf
[Sat Feb 18 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:58 2012] Updating source flux to 3.3e-13
[Sat Feb 18 10:11:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting