[Fri Feb 17 16:10:00 2012] Detection parameters:
  Position = (321.4, 489.1) = 5 34 29.20 22 13 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 21.8
  Background counts = 123.8
  Rate = 0.01 +/- 0.003

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 13.92'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Fri Feb 17 16:12:47 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 13.39"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Feb 17 18:40:58 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Feb 17 22:57:26 2012] Warning, spatial fit 23 centroid is now closest to src. 36
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 2261.340000, observed total counts = 2263.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 24 = 2.343668 pixels
[Fri Feb 17 22:57:26 2012] Warning, changing simple spatial fit ID from 23 to 35
[Fri Feb 17 22:57:26 2012] 2240.368500 total counts/ 2150.460000 bgd. counts: snr = 1.938809
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 2.343668 pixels
  Position = (322.1, 491.3) = 5 34 28.98 22 13 30.7
  Extent = 27.3 (27.2-54.5)" x 5.4 (3.4-18.2)", rotation angle = 106 (81-123) degrees
  Source counts = 89.9 +/- 47.3
  Background counts = 2150.5
  Rate = 0.01 +/- 0.007
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Fri Feb 17 22:57:26 2012] Source is confused with source 13
[Fri Feb 17 22:57:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 16.34"
[Fri Feb 17 22:57:47 2012] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.993
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 16.34"
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20.csv
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20.csv
[Sat Feb 18 02:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Feb 18 02:30:30 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Feb 18 02:30:30 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Feb 18 06:36:16 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(27975.271600, 42698.616000, 1636.182047, 325.176609, 105.830800, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (228, 397) - (416, 585)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(27975.271600, 42698.616000, 2726.970078, 5453.940157, X, Y) && !ellipse(27869.164800, 41437.064000, 2072.856060, 2072.856060, 0.000000, X, Y) && !ellipse(28380.653656, 40150.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.448608, 41639.710663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.741394, 40322.752411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.272186, 39616.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.498600, 39292.778000, 958.280028, 958.280028, 0.000000, X, Y) && !ellipse(27759.241394, 41967.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.020355, 39357.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24.gif
[Sat Feb 18 06:54:53 2012] Mean detx,y = (15349.90, -79.64) 
[Sat Feb 18 06:54:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:55:34 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:55:34 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Feb 18 06:55:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Feb 18 07:28:35 2012] Not generating rmf since there are only 89 counts
[Sat Feb 18 07:28:35 2012] rmf not generated due to insufficient counts
[Sat Feb 18 10:10:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:57 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Feb 18 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:58 2012] Using photon index=1.80, rate=0.0127, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src24.arf
[Sat Feb 18 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:58 2012] Updating source flux to 3.9e-13
[Sat Feb 18 10:11:07 2012] Flag c found in src. 24 procflags, skipping spectral fitting
[Sat Feb 18 10:11:07 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting