[Fri Feb 17 16:09:59 2012] Detection parameters:
  Position = (320.0, 476.9) = 5 34 29.64 22 12 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.0 +/- 23.8
  Background counts = 132.8
  Rate = 0.02 +/- 0.003

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 13.04'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Fri Feb 17 16:12:47 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.869
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.95"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Feb 17 18:40:58 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Feb 17 22:57:26 2012] Warning, spatial fit 12 centroid is now closest to src. 25
[Fri Feb 17 22:57:26 2012] Source 13 is offset by 4.946793 and 2.986775 pixels which is larger than
2 X fitted extent = 1.430823 x 1.430823, not incorporating fit results
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 2592.560000, observed total counts = 2597.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 13 = 0.887408 pixels
[Fri Feb 17 22:57:26 2012] Warning, changing simple spatial fit ID from 12 to 22
[Fri Feb 17 22:57:26 2012] 2558.396000 total counts/ 1898.110000 bgd. counts: snr = 15.155539
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.887408 pixels
  Position = (320.9, 476.8) = 5 34 29.37 22 12 27.7
  Extent = 25.9 (25.1-26.3)", rotation angle = 0
  Source counts = 660.3 +/- 50.6
  Background counts = 1898.1
  Rate = 0.09 +/- 0.007
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 15
[Fri Feb 17 22:57:26 2012] Source is confused with source 18
[Fri Feb 17 22:57:26 2012] Source is confused with source 19
[Fri Feb 17 22:57:26 2012] Source is confused with source 23
[Fri Feb 17 22:57:26 2012] Source is confused with source 24
[Fri Feb 17 22:57:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 25.91"
[Fri Feb 17 22:57:47 2012] source mask rpix=6.0, npix_max = 166, mask sum = 169, frac = 1.014
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 25.91"
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12.csv
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12.csv
[Sat Feb 18 02:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 18 02:30:29 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 18 06:36:16 2012] Warning, spatial fit 12 centroid is now closest to src. 15
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(27869.164800, 41437.064000, 1554.642045, 1554.642045, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (232, 387) - (410, 566)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(27869.164800, 41437.064000, 2591.070075, 5182.140149, X, Y) && !ellipse(27965.354000, 34764.426000, 1664.192048, 1664.192048, 0.000000, X, Y) && !ellipse(28380.653656, 40150.602966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.448608, 41639.710663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.741394, 40322.752411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.272186, 39616.267700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28254.498600, 39292.778000, 958.280028, 958.280028, 0.000000, X, Y) && !ellipse(27759.241394, 41967.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.271600, 42698.616000, 2181.576063, 433.568812, 105.830800, X, Y) && !ellipse(27110.020355, 39357.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y) && !ellipse(28318.271200, 36166.103600, 797.118423, 797.118423, 0.000000, X, Y) && !ellipse(27523.065800, 35966.244200, 966.192028, 966.192028, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13.gif
[Sat Feb 18 06:52:44 2012] Mean detx,y = (14112.83, -133.13) 
[Sat Feb 18 06:52:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:53:15 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:53:15 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Feb 18 06:53:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Feb 18 10:10:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:56 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Feb 18 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:58 2012] Using photon index=1.80, rate=0.0931, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src13.arf
[Sat Feb 18 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:58 2012] Updating source flux to 2.1e-12
[Sat Feb 18 10:11:07 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Sat Feb 18 10:11:07 2012] Flag c found in src. 13 procflags, skipping spectral fitting