[Fri Feb 17 16:09:59 2012] Detection parameters:
  Position = (346.3, 393.0) = 5 34 21.42 22 6 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.0 +/- 22.8
  Background counts = 386.8
  Rate = 0.04 +/- 0.005

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 7.68'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Fri Feb 17 16:12:47 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.27"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Feb 17 18:40:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 18:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Feb 17 18:40:58 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 3532.880000, observed total counts = 3610.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 12 = 3.800902 pixels
[Fri Feb 17 22:57:26 2012] 3450.698000 total counts/ 320.538000 bgd. counts: snr = 174.834355
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.800902 pixels
  Position = (350.1, 392.9) = 5 34 20.24 22 6 22.5
  Extent = 20.5 (20.5-41.1)", rotation angle = 0
  Source counts = 3130.2 +/- 58.7
  Background counts = 320.5
  Rate = 0.4 +/- 0.008
[Fri Feb 17 22:57:26 2012] Spatial fit model total counts = 4445.410000, observed total counts = 4450.000000
[Fri Feb 17 22:57:26 2012] Offset between fit and detection position for source 12 = 3.435149 pixels
[Fri Feb 17 22:57:26 2012] Warning, changing simple spatial fit ID from 11 to 32
[Fri Feb 17 22:57:26 2012] 4370.586000 total counts/ 3543.190000 bgd. counts: snr = 13.900045
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.435149 pixels
  Position = (346.6, 393.0) = 5 34 21.31 22 6 22.8
  Extent = 20.9 (20.8-20.9)", rotation angle = 0
  Source counts = 827.4 +/- 66.1
  Background counts = 3543.2
  Rate = 0.1 +/- 0.009
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 4
[Fri Feb 17 22:57:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 20.88"
[Fri Feb 17 22:57:47 2012] source mask rpix=4.8, npix_max = 112, mask sum = 73, frac = 0.650
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 20.88"
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11.csv
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11.csv
[Sat Feb 18 02:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 18 02:30:29 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 18 06:36:16 2012] Warning, spatial fit 11 centroid is now closest to src. 9
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(30109.630000, 34140.118000, 1252.638036, 1252.638036, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (275, 321) - (419, 465)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(30109.630000, 34140.118000, 2087.730060, 4175.460120, X, Y) && !ellipse(28363.854000, 34196.597000, 1239.080036, 1239.080036, 0.000000, X, Y) && !ellipse(26763.339000, 34210.606000, 1612.392046, 1612.392046, 0.000000, X, Y) && !ellipse(27965.354000, 34764.426000, 1664.192048, 1664.192048, 0.000000, X, Y) && !ellipse(30776.878662, 34087.562134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27826.816000, 34704.605800, 1107.232032, 1107.232032, 0.000000, X, Y) && !ellipse(25597.442200, 34279.985382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27707.741791, 38749.639587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27881.274506, 38081.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y) && !ellipse(28318.271200, 36166.103600, 797.118423, 797.118423, 0.000000, X, Y) && !ellipse(27523.065800, 35966.244200, 966.192028, 966.192028, 0.000000, X, Y) && !ellipse(26901.433289, 34617.182068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30215.547058, 34551.894897, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12.gif
[Sat Feb 18 06:52:12 2012] Mean detx,y = (7323.00, 2372.21) 
[Sat Feb 18 06:52:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:52:39 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:52:39 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Feb 18 06:52:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Feb 18 10:10:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:56 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Feb 18 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:58 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src12.arf
[Sat Feb 18 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:58 2012] Updating source flux to 1.8e-12
[Sat Feb 18 10:11:07 2012] Flag c found in src. 12 procflags, skipping spectral fitting