[Fri Feb 17 16:09:59 2012] Detection parameters:
  Position = (294.8, 394.6) = 5 34 37.54 22 6 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.5 +/- 19.9
  Background counts = 335.6
  Rate = 0.02 +/- 0.003

[Fri Feb 17 16:10:00 2012] Off-axis axis estimate = 6.98'
[Fri Feb 17 16:12:47 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:12:47 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Feb 17 16:12:47 2012] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.777
[Fri Feb 17 16:12:47 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.92"
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src10.ximg exists
[Fri Feb 17 18:40:57 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Feb 17 18:40:57 2012] Fit fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Feb 17 18:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Feb 17 18:40:58 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Feb 17 18:40:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Feb 17 18:40:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:57:26 2012] Warning, spatial fit 10 centroid is now closest to src. 32
[Fri Feb 17 22:57:26 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:57:26 2012] Assessing source extent using major
[Fri Feb 17 22:57:26 2012] Source does appear to be extended
[Fri Feb 17 22:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:57:26 2012] Source is confused with source 5
[Fri Feb 17 22:57:47 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:57:47 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Feb 17 22:57:47 2012] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.777
[Fri Feb 17 22:57:47 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.92"
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10.csv
[Sat Feb 18 02:30:28 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Feb 18 02:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10.csv
[Sat Feb 18 02:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Feb 18 02:30:29 2012] fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Feb 18 02:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Feb 18 02:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590701_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 06:36:16 2012] Source 11 is offset by 6.059657 and -7.182444 pixels which is larger than
2 X fitted extent = 2.284837 x 2.284837, not incorporating fit results
[Sat Feb 18 06:36:16 2012] Spatial fit model total counts = 2088.720000, observed total counts = 2377.000000
[Sat Feb 18 06:36:16 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 18 06:36:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 06:36:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 06:36:16 2012] Assessing source extent using major
[Sat Feb 18 06:36:16 2012] Source does appear to be extended
[Sat Feb 18 06:36:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 06:36:36 2012] XMMSAS src. selection expression = ellipse(25597.442200, 34279.985382, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing source region out to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11_src.reg
[Sat Feb 18 06:36:36 2012] Extracting stamp from image fullrun_mos1_xmm0412590701_pi300-10000_cl_sm2.00.img.gz, (257, 357) - (332, 432)
[Sat Feb 18 06:36:36 2012] XMMSAS bgd. selection expression = annulus(25597.442200, 34279.985382, 1087.500000, 2175.000000, X, Y) && !ellipse(28363.854000, 34196.597000, 1239.080036, 1239.080036, 0.000000, X, Y) && !ellipse(26763.339000, 34210.606000, 1612.392046, 1612.392046, 0.000000, X, Y) && !ellipse(27965.354000, 34764.426000, 1664.192048, 1664.192048, 0.000000, X, Y) && !ellipse(27826.816000, 34704.605800, 1107.232032, 1107.232032, 0.000000, X, Y) && !ellipse(27892.010800, 36312.231200, 1733.048050, 1733.048050, 0.000000, X, Y) && !ellipse(28318.271200, 36166.103600, 797.118423, 797.118423, 0.000000, X, Y) && !ellipse(27523.065800, 35966.244200, 966.192028, 966.192028, 0.000000, X, Y) && !ellipse(26901.433289, 34617.182068, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 18 06:36:36 2012] Writing fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11.gif
[Sat Feb 18 06:51:52 2012] Mean detx,y = (7067.41, -2086.82) 
[Sat Feb 18 06:51:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 18 06:52:06 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 18 06:52:06 2012] Setting source spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Feb 18 06:52:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Feb 18 07:17:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Feb 18 07:17:31 2012] rmf not generated due to insufficient counts
[Sat Feb 18 10:10:56 2012] Updating aperture counts using extracted products
[Sat Feb 18 10:10:56 2012] Error reading totcts from fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Feb 18 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 10:10:58 2012] Using photon index=1.80, rate=0.0209, arf fullrun_mos1_xmm0412590701_pi300-10000_pass1_cl_src11.arf
[Sat Feb 18 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 10:10:58 2012] Updating source flux to 3.7e-13
[Sat Feb 18 10:11:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting