[Sat Nov 26 22:29:34 2011] Detection parameters:
  Position = (306.1, 234.5) = 5 34 34.14 21 54 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.2 +/- 21.3
  Background counts = 210.6
  Rate = 0.03 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 4.67'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 8.76"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.791
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 8.76"
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61.csv
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61.csv
[Sun Nov 27 22:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Nov 27 22:37:40 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 61 centroid is now closest to src. 100
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 103
[Sun Nov 27 22:38:56 2011] Source is confused with source 106
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 8.76"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.791
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 8.76"
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53.csv
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53_1.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53.csv
[Tue Nov 29 05:35:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Tue Nov 29 05:35:48 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Tue Nov 29 05:36:53 2011] Source 98 is offset by -1.369018 and -1.718393 pixels which is larger than
2 X fitted extent = 1.426786 x 1.426786, not incorporating fit results
[Tue Nov 29 05:36:53 2011] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 98 at 16.219912 pixels away
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 53 centroid is now closest to src. 107
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:42 2011] XMMSAS src. selection expression = ellipse(26584.117462, 20355.621841, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:42 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98_src.reg
[Tue Nov 29 09:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (269, 197) - (344, 272)
[Tue Nov 29 09:11:42 2011] XMMSAS bgd. selection expression = annulus(26584.117462, 20355.621841, 1087.500000, 2175.000000, X, Y) && !ellipse(28194.442000, 19111.874000, 1483.312043, 1483.312043, 0.000000, X, Y) && !ellipse(27185.053780, 19989.908600, 479.278414, 479.278414, 0.000000, X, Y) && !ellipse(27495.065200, 20266.482000, 1419.904041, 1419.904041, 0.000000, X, Y) && !ellipse(26965.000000, 18548.160202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.499000, 20223.375400, 1465.632042, 1465.632042, 0.000000, X, Y) && !ellipse(25438.599762, 20406.235992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26790.992035, 18986.552002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26034.786180, 20381.243140, 1187.456034, 1187.456034, 0.000000, X, Y) && !ellipse(27253.258400, 19811.512000, 1467.704042, 1467.704042, 0.000000, X, Y) && !ellipse(26521.519836, 19454.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28888.572000, 19243.907400, 1516.504044, 533.845615, 358.959840, X, Y) && !ellipse(26324.368860, 18565.880340, 737.152821, 737.152821, 0.000000, X, Y) && !ellipse(28405.982000, 20257.537400, 1464.696042, 1464.696042, 0.000000, X, Y) && !ellipse(24009.522278, 20494.566162, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:42 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98.gif
[Tue Nov 29 10:20:58 2011] Mean detx,y = (272.66, -7255.09) 
[Tue Nov 29 10:21:00 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:21:25 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:21:25 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Tue Nov 29 10:21:25 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Tue Nov 29 13:47:44 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 13:47:44 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:05 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:05 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Tue Nov 29 15:09:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:10 2011] Using photon index=1.80, rate=0.0321, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src98.arf
[Tue Nov 29 15:09:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:10 2011] Updating source flux to 6e-13
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting