[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (408.1, 323.4) = 5 34 2.23 22 1 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.6 +/- 19.0
  Background counts = 147.5
  Rate = 0.02 +/- 0.005

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 8.16'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.51"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.882
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 10.51"
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95.csv
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95_1.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95.csv
[Sun Nov 27 22:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sun Nov 27 22:37:42 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Sun Nov 27 22:38:55 2011] Source 79 is offset by 5.997052 and -1.700000 pixels which is larger than
2 X fitted extent = 1.140809 x 1.140809, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 11.083917 pixels away
[Sun Nov 27 22:38:56 2011] Source 79 is offset by -9.466419 and 0.834736 pixels which is larger than
2 X fitted extent = 1.408846 x 1.408846, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 95 centroid is now closest to src. 78
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 78
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 10.51"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.882
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 85 for pass 1, mean size = 10.51"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85.csv
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85_1.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85.csv
[Tue Nov 29 05:35:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Tue Nov 29 05:35:49 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 11.083917 pixels away
[Tue Nov 29 05:36:53 2011] Source 79 is offset by -4.061936 and 0.955035 pixels which is larger than
2 X fitted extent = 1.812405 x 1.812405, not incorporating fit results
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 85 centroid is now closest to src. 78
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(35458.247559, 28089.604034, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (371, 286) - (446, 361)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(35458.247559, 28089.604034, 1087.500000, 2175.000000, X, Y) && !ellipse(34231.820000, 29078.967000, 1621.144047, 1621.144047, 0.000000, X, Y) && !ellipse(34181.507690, 27361.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.510000, 28596.072000, 1152.344033, 1152.344033, 0.000000, X, Y) && !ellipse(34251.308411, 30323.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34330.776093, 26575.578888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34530.844000, 27147.532800, 1645.024047, 1645.024047, 0.000000, X, Y) && !ellipse(34284.679474, 31098.341644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34642.176514, 29178.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34627.342000, 30974.922000, 1737.752050, 1454.848042, 37.725000, X, Y) && !ellipse(35700.712000, 28304.882000, 1681.056048, 1681.056048, 0.000000, X, Y) && !ellipse(35412.366000, 27186.541180, 835.064024, 835.064024, 0.000000, X, Y) && !ellipse(35087.132874, 27091.992706, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79.gif
[Tue Nov 29 10:54:02 2011] Mean detx,y = (-8186.81, 1107.18) 
[Tue Nov 29 10:54:03 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:54:16 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:54:17 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Tue Nov 29 10:54:17 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Tue Nov 29 14:55:59 2011] Not generating rmf since there are only 78 counts
[Tue Nov 29 14:55:59 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:07 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:07 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.0209, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src79.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 3.8e-13
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting