[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (235.3, 339.2) = 5 34 56.29 22 2 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.2 +/- 19.1
  Background counts = 186.4
  Rate = 0.03 +/- 0.003

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 5.45'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.553
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 9.15"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69.csv
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69.csv
[Sun Nov 27 22:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Nov 27 22:37:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69.csv
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Nov 27 22:37:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69.csv
[Sun Nov 27 22:37:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 69 centroid is now closest to src. 73
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 73
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 9.15"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.553
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 9.15"
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61.csv
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61_1.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61.csv
[Tue Nov 29 05:35:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Tue Nov 29 05:35:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61.csv
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Tue Nov 29 05:35:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61.csv
[Tue Nov 29 05:35:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 1227.480000, observed total counts = 1589.000000
[Tue Nov 29 05:36:53 2011] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Nov 29 05:36:53 2011] Source 76 is offset by 8.813508 and 0.302411 pixels which is larger than
2 X fitted extent = 8.521196 x 8.521196, not incorporating fit results
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:43 2011] XMMSAS src. selection expression = ellipse(20421.931198, 29460.517792, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:43 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76_src.reg
[Tue Nov 29 09:11:43 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (198, 302) - (273, 377)
[Tue Nov 29 09:11:43 2011] XMMSAS bgd. selection expression = annulus(20421.931198, 29460.517792, 1087.500000, 2175.000000, X, Y) && !ellipse(19978.603400, 27797.140000, 1453.576042, 1453.576042, 0.000000, X, Y) && !ellipse(20279.984200, 31869.594000, 1590.704046, 1590.704046, 0.000000, X, Y) && !ellipse(20036.502940, 26748.178000, 1097.704032, 1097.704032, 0.000000, X, Y) && !ellipse(20427.147003, 28800.235901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.791885, 30426.975006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.997345, 29967.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.994690, 31235.572144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20113.513200, 27056.628000, 1408.000041, 1408.000041, 0.000000, X, Y)
[Tue Nov 29 09:11:43 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76.gif
[Tue Nov 29 10:32:29 2011] Mean detx,y = (7095.43, 1630.93) 
[Tue Nov 29 10:32:31 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:32:55 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:32:55 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Nov 29 10:32:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Tue Nov 29 14:05:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 14:05:16 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:06 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:06 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Tue Nov 29 15:09:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:10 2011] Using photon index=1.80, rate=0.0292, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src76.arf
[Tue Nov 29 15:09:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:10 2011] Updating source flux to 6.2e-12
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting