[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (393.1, 338.0) = 5 34 6.91 22 2 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.7 +/- 20.4
  Background counts = 123.2
  Rate = 0.06 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.44'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.15"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.748
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 10.15"
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21.csv
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21.csv
[Sun Nov 27 22:37:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Nov 27 22:37:39 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Nov 27 22:38:55 2011] Warning, spatial fit 21 centroid is now closest to src. 71
[Sun Nov 27 22:38:56 2011] Spatial fit model total counts = 2045.090000, observed total counts = 2049.000000
[Sun Nov 27 22:38:56 2011] Offset between fit and detection position for source 75 = 3.303172 pixels
[Sun Nov 27 22:38:56 2011] Warning, changing simple spatial fit ID from 21 to 63
[Sun Nov 27 22:38:56 2011] 1899.004000 total counts/ 761.094000 bgd. counts: snr = 41.246658
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 3.303172 pixels
  Position = (394.0, 334.8) = 5 34 6.63 22 2 6.3
  Extent = 20.3 (19.6-20.6)", rotation angle = 0
  Source counts = 1137.9 +/- 43.6
  Background counts = 761.1
  Rate = 0.2 +/- 0.008
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 80
[Sun Nov 27 22:38:56 2011] Source is confused with source 74
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 20.26"
[Mon Nov 28 13:20:41 2011] source mask rpix=4.7, npix_max = 106, mask sum = 70, frac = 0.658
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 20.26"
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18.csv
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18.csv
[Tue Nov 29 05:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Nov 29 05:35:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Nov 29 05:35:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Nov 29 05:35:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 18 centroid is now closest to src. 71
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:38 2011] Counts = 1137.910000, rescaling region sizes by 2.000000
[Tue Nov 29 09:11:38 2011] XMMSAS src. selection expression = ellipse(34231.820000, 29078.967000, 2431.716070, 2431.716070, 0.000000, X, Y)
[Tue Nov 29 09:11:38 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75_src.reg
[Tue Nov 29 09:11:38 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (254, 195) - (534, 475)
[Tue Nov 29 09:11:39 2011] XMMSAS bgd. selection expression = annulus(34231.820000, 29078.967000, 8105.720233, 16211.440466, X, Y) && !ellipse(28699.703217, 35004.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.442000, 19111.874000, 1483.312043, 1483.312043, 0.000000, X, Y) && !ellipse(27865.644348, 34476.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(28251.616000, 36064.618600, 1731.216050, 1731.216050, 0.000000, X, Y) && !ellipse(28875.054000, 34224.836000, 995.472029, 995.472029, 0.000000, X, Y) && !ellipse(26896.004000, 34382.134200, 1462.080042, 1462.080042, 0.000000, X, Y) && !ellipse(29467.312000, 34374.768000, 1653.776048, 1653.776048, 0.000000, X, Y) && !ellipse(27876.811401, 35785.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.218000, 35023.820000, 1250.760036, 1250.760036, 0.000000, X, Y) && !ellipse(27486.981415, 36057.997437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.668365, 34493.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.004000, 34425.325000, 1602.952046, 1602.952046, 0.000000, X, Y) && !ellipse(27185.401947, 35532.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.858398, 38581.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.933258, 38057.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.053780, 19989.908600, 479.278414, 479.278414, 0.000000, X, Y) && !ellipse(34181.507690, 27361.597656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(27495.065200, 20266.482000, 1419.904041, 1419.904041, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.510000, 28596.072000, 1152.344033, 1152.344033, 0.000000, X, Y) && !ellipse(33751.000000, 24380.591827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28477.176000, 42392.468000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(26965.000000, 18548.160202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.499000, 20223.375400, 1465.632042, 1465.632042, 0.000000, X, Y) && !ellipse(25438.599762, 20406.235992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.750946, 36872.470154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26790.992035, 18986.552002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26034.786180, 20381.243140, 1187.456034, 1187.456034, 0.000000, X, Y) && !ellipse(34251.308411, 30323.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34330.776093, 26575.578888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(28399.780487, 35642.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(29111.694733, 34732.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34100.696564, 24917.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34530.844000, 27147.532800, 1645.024047, 1645.024047, 0.000000, X, Y) && !ellipse(27253.258400, 19811.512000, 1467.704042, 1467.704042, 0.000000, X, Y) && !ellipse(34284.679474, 31098.341644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.519836, 19454.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28888.572000, 19243.907400, 1516.504044, 533.845615, 358.959840, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(19978.603400, 27797.140000, 1453.576042, 1453.576042, 0.000000, X, Y) && !ellipse(26324.368860, 18565.880340, 737.152821, 737.152821, 0.000000, X, Y) && !ellipse(26584.117462, 20355.621841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.937400, 43587.652000, 2095.120060, 2095.120060, 0.000000, X, Y) && !ellipse(34642.176514, 29178.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28791.994690, 36055.029114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20279.984200, 31869.594000, 1590.704046, 1590.704046, 0.000000, X, Y) && !ellipse(32536.624115, 34965.463501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34627.342000, 30974.922000, 1737.752050, 1454.848042, 37.725000, X, Y) && !ellipse(20421.931198, 29460.517792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20036.502940, 26748.178000, 1097.704032, 1097.704032, 0.000000, X, Y) && !ellipse(35700.712000, 28304.882000, 1681.056048, 1681.056048, 0.000000, X, Y) && !ellipse(29065.765381, 37817.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33909.638000, 23805.371765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20427.147003, 28800.235901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19846.658035, 24664.717133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.791885, 30426.975006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.366000, 27186.541180, 835.064024, 835.064024, 0.000000, X, Y) && !ellipse(33667.024078, 22423.110413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.910600, 34422.076000, 922.096027, 922.096027, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(35202.400970, 32125.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.660309, 38581.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30603.791992, 34191.695038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.982000, 20257.537400, 1464.696042, 1464.696042, 0.000000, X, Y) && !ellipse(27285.628000, 43906.664000, 1777.072051, 1777.072051, 0.000000, X, Y) && !ellipse(35087.132874, 27091.992706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(34560.146729, 31581.591492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y) && !ellipse(23528.245117, 34476.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.196930, 40146.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.997345, 29967.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33668.619751, 23456.575256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35458.247559, 28089.604034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.994690, 31235.572144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24009.522278, 20494.566162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.976000, 34587.935200, 1642.784047, 1642.784047, 0.000000, X, Y) && !ellipse(20113.513200, 27056.628000, 1408.000041, 1408.000041, 0.000000, X, Y) && !ellipse(34192.188873, 32046.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25913.236600, 13663.580000, 923.496027, 923.496027, 0.000000, X, Y)
[Tue Nov 29 09:11:39 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75.gif
[Tue Nov 29 09:29:16 2011] Mean detx,y = (-7677.82, 1839.60) 
[Tue Nov 29 09:29:19 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:35:24 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:35:24 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Nov 29 09:35:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue Nov 29 15:09:03 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:03 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Nov 29 15:09:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:08 2011] Using photon index=1.80, rate=0.198, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src75.arf
[Tue Nov 29 15:09:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:08 2011] Updating source flux to 2.9e-12
[Tue Nov 29 15:19:21 2011] Flag c found in src. 75 procflags, skipping spectral fitting