[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (394.6, 358.0) = 5 34 6.44 22 3 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.9 +/- 19.3
  Background counts = 117.6
  Rate = 0.04 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 8.20'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.879
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 10.53"
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47.csv
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47.csv
[Sun Nov 27 22:37:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Nov 27 22:37:40 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Nov 27 22:38:55 2011] Warning, spatial fit 47 centroid is now closest to src. 63
[Sun Nov 27 22:38:56 2011] Source 70 is offset by -0.174075 and -2.798648 pixels which is larger than
2 X fitted extent = 1.273959 x 1.273959, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 69
[Sun Nov 27 22:38:56 2011] Source is confused with source 67
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 10.53"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.879
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 10.53"
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43.csv
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43.csv
[Tue Nov 29 05:35:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Nov 29 05:35:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43.csv
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Nov 29 05:35:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43.csv
[Tue Nov 29 05:35:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 43 centroid is now closest to src. 71
[Tue Nov 29 05:36:53 2011] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 13.794527 pixels away
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:42 2011] XMMSAS src. selection expression = ellipse(34284.679474, 31098.341644, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:42 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70_src.reg
[Tue Nov 29 09:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (357, 321) - (432, 396)
[Tue Nov 29 09:11:42 2011] XMMSAS bgd. selection expression = annulus(34284.679474, 31098.341644, 1087.500000, 2175.000000, X, Y) && !ellipse(34231.820000, 29078.967000, 1621.144047, 1621.144047, 0.000000, X, Y) && !ellipse(34207.510000, 28596.072000, 1152.344033, 1152.344033, 0.000000, X, Y) && !ellipse(34251.308411, 30323.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34642.176514, 29178.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34627.342000, 30974.922000, 1737.752050, 1454.848042, 37.725000, X, Y) && !ellipse(35700.712000, 28304.882000, 1681.056048, 1681.056048, 0.000000, X, Y) && !ellipse(35202.400970, 32125.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.146729, 31581.591492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35458.247559, 28089.604034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34192.188873, 32046.556152, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:42 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70.gif
[Tue Nov 29 10:16:07 2011] Mean detx,y = (-7034.53, 3956.40) 
[Tue Nov 29 10:16:10 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:16:29 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:16:30 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Nov 29 10:16:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Tue Nov 29 13:24:34 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 13:24:34 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:04 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:05 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Nov 29 15:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:09 2011] Using photon index=1.80, rate=0.0396, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src70.arf
[Tue Nov 29 15:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:09 2011] Updating source flux to 7.9e-13
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting