[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (236.5, 359.6) = 5 34 55.92 22 3 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.2 +/- 16.0
  Background counts = 138.6
  Rate = 0.02 +/- 0.003

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 6.31'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 9.58"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.2, npix_max = 29, mask sum = 16, frac = 0.547
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 96 for pass 0, mean size = 9.58"
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96.csv
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96_1.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96.csv
[Sun Nov 27 22:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Sun Nov 27 22:37:42 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Sun Nov 27 22:38:56 2011] Source 68 is offset by -4.560429 and 2.647404 pixels which is larger than
2 X fitted extent = 1.132543 x 1.132543, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Source 68 is offset by -7.021256 and 5.065841 pixels which is larger than
2 X fitted extent = 1.065149 x 1.065149, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 96 centroid is now closest to src. 62
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 9.58"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.2, npix_max = 29, mask sum = 16, frac = 0.547
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 86 for pass 1, mean size = 9.58"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86.csv
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86_1.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86.csv
[Tue Nov 29 05:35:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Tue Nov 29 05:35:49 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src86 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 12.418151 pixels away
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:54 2011] Assessing source extent using major
[Tue Nov 29 05:36:54 2011] Source does appear to be extended
[Tue Nov 29 05:36:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:36:54 2011] Source is confused with source 62
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(20526.994690, 31235.572144, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (199, 322) - (274, 397)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(20526.994690, 31235.572144, 1087.500000, 2175.000000, X, Y) && !ellipse(19978.603400, 27797.140000, 1453.576042, 1453.576042, 0.000000, X, Y) && !ellipse(20279.984200, 31869.594000, 1590.704046, 1590.704046, 0.000000, X, Y) && !ellipse(20421.931198, 29460.517792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20427.147003, 28800.235901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.791885, 30426.975006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.997345, 29967.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.976000, 34587.935200, 1642.784047, 1642.784047, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68.gif
[Tue Nov 29 10:54:25 2011] Mean detx,y = (7080.96, 3406.93) 
[Tue Nov 29 10:54:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:54:45 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:54:45 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Nov 29 10:54:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Nov 29 14:56:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 14:56:05 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:07 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:07 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.0207, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src68.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Getting flux using calc_pl_flux failed
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting