[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (232.2, 365.8) = 5 34 57.27 22 4 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.5 +/- 20.2
  Background counts = 153.4
  Rate = 0.03 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 6.85'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 9.85"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.177
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 70 for pass 0, mean size = 9.85"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70.csv
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70.csv
[Sun Nov 27 22:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Nov 27 22:37:41 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Sun Nov 27 22:38:56 2011] Spatial fit model total counts = 1639.120000, observed total counts = 1639.000000
[Sun Nov 27 22:38:56 2011] Offset between fit and detection position for source 65 = 3.936367 pixels
[Sun Nov 27 22:38:56 2011] Warning, changing simple spatial fit ID from 70 to 66
[Sun Nov 27 22:38:56 2011] 1523.310049 total counts/ 1523.310000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 3.936367 pixels
  Position = (232.1, 361.8) = 5 34 57.29 22 4 4.0
  Extent = 18.9 (2.5-37.3)", rotation angle = 0
  Source counts = 0.0 +/- 39.0
  Background counts = 1523.3
  Rate = 8e-09 +/- 0.007
  Deleting source due to low Poisson probability