[Sat Nov 26 22:29:33 2011] Detection parameters:
  Position = (307.0, 395.7) = 5 34 33.87 22 6 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 319.0 +/- 25.1
  Background counts = 156.5
  Rate = 0.09 +/- 0.007

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.08'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 9.97"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 9.97"
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src8.ximg exists
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Nov 27 22:37:35 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src8 appears to have run properly
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Nov 27 22:37:38 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Nov 27 22:38:55 2011] Warning, spatial fit 8 centroid is now closest to src. 59
[Sun Nov 27 22:38:55 2011] Source 58 is offset by -6.624558 and -0.701630 pixels which is larger than
2 X fitted extent = 2.286170 x 2.286170, not incorporating fit results
[Sun Nov 27 22:38:55 2011] Source 58 is offset by 3.769164 and -6.490274 pixels which is larger than
2 X fitted extent = 9.627954 x 3.261182, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 13
[Sun Nov 27 22:38:56 2011] Source is confused with source 60
[Sun Nov 27 22:38:56 2011] Source is confused with source 59
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 9.97"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 9.97"
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6.csv
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6.csv
[Tue Nov 29 05:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Nov 29 05:35:46 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 2634.580000, observed total counts = 2682.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 58 = 2.736177 pixels
[Tue Nov 29 05:36:53 2011] 2686.756000 total counts/ 1811.270000 bgd. counts: snr = 20.571104
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 2.736177 pixels
  Position = (309.7, 395.8) = 5 34 33.01 22 6 31.6
  Extent = 18.3 (18.3-18.4)", rotation angle = 0
  Source counts = 875.5 +/- 51.8
  Background counts = 1811.3
  Rate = 0.2 +/- 0.009
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:37 2011] XMMSAS src. selection expression = ellipse(26896.004000, 34382.134200, 1096.560032, 1096.560032, 0.000000, X, Y)
[Tue Nov 29 09:11:37 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58_src.reg
[Tue Nov 29 09:11:37 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (247, 333) - (373, 459)
[Tue Nov 29 09:11:37 2011] XMMSAS bgd. selection expression = annulus(26896.004000, 34382.134200, 1827.600053, 3655.200105, X, Y) && !ellipse(28699.703217, 35004.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.644348, 34476.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(28251.616000, 36064.618600, 1731.216050, 1731.216050, 0.000000, X, Y) && !ellipse(28875.054000, 34224.836000, 995.472029, 995.472029, 0.000000, X, Y) && !ellipse(29467.312000, 34374.768000, 1653.776048, 1653.776048, 0.000000, X, Y) && !ellipse(27876.811401, 35785.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.218000, 35023.820000, 1250.760036, 1250.760036, 0.000000, X, Y) && !ellipse(27486.981415, 36057.997437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.668365, 34493.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.004000, 34425.325000, 1602.952046, 1602.952046, 0.000000, X, Y) && !ellipse(27185.401947, 35532.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.858398, 38581.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.933258, 38057.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(27857.750946, 36872.470154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28399.780487, 35642.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(29111.694733, 34732.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(28791.994690, 36055.029114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.765381, 37817.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.910600, 34422.076000, 922.096027, 922.096027, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(27503.660309, 38581.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30603.791992, 34191.695038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23528.245117, 34476.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.976000, 34587.935200, 1642.784047, 1642.784047, 0.000000, X, Y)
[Tue Nov 29 09:11:37 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58.gif
[Tue Nov 29 09:17:35 2011] Mean detx,y = (603.44, 7129.80) 
[Tue Nov 29 09:17:37 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:18:14 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:18:14 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Nov 29 09:18:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue Nov 29 15:09:02 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:02 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Nov 29 15:09:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:08 2011] Using photon index=1.80, rate=0.152, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src58.arf
[Tue Nov 29 15:09:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:08 2011] Updating source flux to 2.9e-12
[Tue Nov 29 15:19:21 2011] Flag b found in src. 58 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag c found in src. 58 procflags, skipping spectral fitting