[Sat Nov 26 22:29:32 2011] Detection parameters:
  Position = (265.3, 399.0) = 5 34 46.90 22 6 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.8 +/- 15.4
  Background counts = 130.2
  Rate = 0.02 +/- 0.003

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.68'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 99 for pass 0, mean size = 10.27"
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99.csv
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99_1.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99.csv
[Sun Nov 27 22:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Sun Nov 27 22:37:42 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Sun Nov 27 22:38:56 2011] Source 54 is offset by 3.655598 and -7.285475 pixels which is larger than
2 X fitted extent = 1.164575 x 1.164575, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Spatial fit model total counts = 1190.000000, observed total counts = 1202.000000
[Sun Nov 27 22:38:56 2011] Offset between fit and detection position for source 54 = 6.445123 pixels
[Sun Nov 27 22:38:56 2011] 1331.852000 total counts/ 503.484000 bgd. counts: snr = 36.917346
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 6.445123 pixels
  Position = (259.0, 398.1) = 5 34 48.90 22 6 41.9
  Extent = 20.5 (20.5-41.1)", rotation angle = 0
  Source counts = 828.4 +/- 36.5
  Background counts = 503.5
  Rate = 0.1 +/- 0.006
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 11
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 20.53"
[Mon Nov 28 13:20:41 2011] source mask rpix=4.7, npix_max = 109, mask sum = 68, frac = 0.624
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 89 for pass 1, mean size = 20.53"
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89.ximg exists
[Tue Nov 29 05:35:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89.csv
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89_1.ximg exists
[Tue Nov 29 05:35:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89.csv
[Tue Nov 29 05:35:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Tue Nov 29 05:35:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89.csv
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Tue Nov 29 05:35:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89.csv
[Tue Nov 29 05:35:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 2197.400000, observed total counts = 2637.000000
[Tue Nov 29 05:36:53 2011] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Nov 29 05:36:54 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:54 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:54 2011] Source does appear to be extended
[Tue Nov 29 05:36:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(22480.976000, 34587.935200, 1232.088035, 1232.088035, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (188, 327) - (330, 469)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(22480.976000, 34587.935200, 2053.480059, 4106.960118, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(28251.616000, 36064.618600, 1731.216050, 1731.216050, 0.000000, X, Y) && !ellipse(26896.004000, 34382.134200, 1462.080042, 1462.080042, 0.000000, X, Y) && !ellipse(25112.668365, 34493.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.004000, 34425.325000, 1602.952046, 1602.952046, 0.000000, X, Y) && !ellipse(27185.401947, 35532.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(20279.984200, 31869.594000, 1590.704046, 1590.704046, 0.000000, X, Y) && !ellipse(19951.791885, 30426.975006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.910600, 34422.076000, 922.096027, 922.096027, 0.000000, X, Y) && !ellipse(23528.245117, 34476.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.997345, 29967.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.994690, 31235.572144, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54.gif
[Tue Nov 29 10:55:21 2011] Mean detx,y = (5017.99, 7148.24) 
[Tue Nov 29 10:55:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:55:58 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:55:59 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Nov 29 10:55:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Nov 29 15:09:07 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:07 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.144, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src54.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 3e-12
[Tue Nov 29 15:19:21 2011] Flag b found in src. 54 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag p found in src. 54 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag c found in src. 54 procflags, skipping spectral fitting