[Sat Nov 26 22:29:32 2011] Detection parameters:
  Position = (314.8, 404.3) = 5 34 31.42 22 6 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.6 +/- 24.3
  Background counts = 147.2
  Rate = 0.08 +/- 0.008

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.77'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.910
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 10.31"
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13.csv
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13.csv
[Sun Nov 27 22:37:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Nov 27 22:37:38 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Nov 27 22:38:55 2011] Spatial fit model total counts = 2865.440000, observed total counts = 2863.000000
[Sun Nov 27 22:38:55 2011] Offset between fit and detection position for source 47 = 1.109709 pixels
[Sun Nov 27 22:38:55 2011] Warning, changing simple spatial fit ID from 13 to 10
[Sun Nov 27 22:38:55 2011] 2861.258200 total counts/ 2840.010000 bgd. counts: snr = 0.398715
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.109709 pixels
  Position = (314.9, 403.2) = 5 34 31.40 22 7 4.2
  Extent = 3.5 (2.8-6.2)", rotation angle = 0
  Source counts = 21.2 +/- 53.5
  Background counts = 2840.0
  Rate = 0.004 +/- 0.009
  Deleting source due to low Poisson probability