[Sat Nov 26 22:29:32 2011] Detection parameters:
  Position = (338.8, 422.7) = 5 34 23.89 22 8 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.5 +/- 18.9
  Background counts = 101.7
  Rate = 0.02 +/- 0.003

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 9.48'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 11.17"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.824
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 11.17"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src80.ximg exists
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src80_1.ximg exists
[Sun Nov 27 22:37:37 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src80 appears to have run properly
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sun Nov 27 22:37:41 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Sun Nov 27 22:38:55 2011] Source 37 is offset by 7.409066 and 0.178031 pixels which is larger than
2 X fitted extent = 1.303522 x 1.303522, not incorporating fit results
[Sun Nov 27 22:38:55 2011] Source 37 is offset by 2.079526 and 1.992123 pixels which is larger than
2 X fitted extent = 1.219715 x 1.219715, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Spatial fit model total counts = 1454.760000, observed total counts = 1456.000000
[Sun Nov 27 22:38:56 2011] Offset between fit and detection position for source 37 = 9.724523 pixels
[Sun Nov 27 22:38:56 2011] 1392.227000 total counts/ 1224.350000 bgd. counts: snr = 4.797759
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 9.724523 pixels
  Position = (344.5, 430.7) = 5 34 22.12 22 9 3.5
  Extent = 22.3 (22.3-44.7)", rotation angle = 0
  Source counts = 167.9 +/- 37.3
  Background counts = 1224.3
  Rate = 0.03 +/- 0.006
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 33
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 22.33"
[Mon Nov 28 13:20:41 2011] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.953
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 22.33"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71.csv
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71.csv
[Tue Nov 29 05:35:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Nov 29 05:35:48 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 1657.750000, observed total counts = 1658.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 37 = 9.046792 pixels
[Tue Nov 29 05:36:53 2011] Warning, changing simple spatial fit ID from 71 to 64
[Tue Nov 29 05:36:53 2011] 1383.769700 total counts/ 1289.430000 bgd. counts: snr = 2.627215
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 9.046792 pixels
  Position = (344.6, 439.7) = 5 34 22.08 22 9 42.8
  Extent = 23.1 (23.1-23.1)", rotation angle = 0
  Source counts = 94.3 +/- 37.2
  Background counts = 1289.4
  Rate = 0.02 +/- 0.006
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(29934.194000, 38206.764000, 1385.730040, 1385.730040, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (265, 360) - (424, 519)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(29934.194000, 38206.764000, 2309.550066, 4619.100133, X, Y) && !ellipse(28699.703217, 35004.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.644348, 34476.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(28251.616000, 36064.618600, 1731.216050, 1731.216050, 0.000000, X, Y) && !ellipse(28875.054000, 34224.836000, 995.472029, 995.472029, 0.000000, X, Y) && !ellipse(26896.004000, 34382.134200, 1462.080042, 1462.080042, 0.000000, X, Y) && !ellipse(29467.312000, 34374.768000, 1653.776048, 1653.776048, 0.000000, X, Y) && !ellipse(27876.811401, 35785.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.218000, 35023.820000, 1250.760036, 1250.760036, 0.000000, X, Y) && !ellipse(27486.981415, 36057.997437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.668365, 34493.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.004000, 34425.325000, 1602.952046, 1602.952046, 0.000000, X, Y) && !ellipse(27185.401947, 35532.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27979.858398, 38581.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.933258, 38057.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28477.176000, 42392.468000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(27857.750946, 36872.470154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(28399.780487, 35642.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(29111.694733, 34732.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(28300.937400, 43587.652000, 2095.120060, 2095.120060, 0.000000, X, Y) && !ellipse(28791.994690, 36055.029114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32536.624115, 34965.463501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.765381, 37817.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.660309, 38581.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30603.791992, 34191.695038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27285.628000, 43906.664000, 1777.072051, 1777.072051, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y) && !ellipse(27538.196930, 40146.413330, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37.gif
[Tue Nov 29 10:38:19 2011] Mean detx,y = (-2016.99, 10742.58) 
[Tue Nov 29 10:38:21 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:38:47 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:38:48 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Nov 29 10:38:48 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Nov 29 14:29:36 2011] Not generating rmf since there are only 94 counts
[Tue Nov 29 14:29:36 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:06 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:06 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src37.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 3.5e-13
[Tue Nov 29 15:19:21 2011] Flag b found in src. 37 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag c found in src. 37 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Source 37 has fewer than 100.000000 counts, skipping spectral fitting