[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (317.1, 462.0) = 5 34 30.70 22 11 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.3 +/- 19.1
  Background counts = 54.6
  Rate = 0.02 +/- 0.003

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 11.94'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 12.40"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.8, npix_max = 44, mask sum = 35, frac = 0.780
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 93 for pass 0, mean size = 12.40"
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93.csv
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93_1.ximg exists
[Sun Nov 27 22:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93.csv
[Sun Nov 27 22:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Sun Nov 27 22:37:42 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sun Nov 27 22:38:55 2011] Source 27 is offset by 3.963183 and 1.434268 pixels which is larger than
2 X fitted extent = 9.278529 x 1.159816, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 12.126958 pixels away
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 93 centroid is now closest to src. 4
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 7
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 12.40"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.8, npix_max = 44, mask sum = 35, frac = 0.780
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 12.40"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src83.ximg exists
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Nov 29 05:35:45 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src83 appears to have run properly
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Nov 29 05:35:49 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 83 centroid is now closest to src. 26
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(27538.196930, 40146.413330, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (280, 425) - (355, 500)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(27538.196930, 40146.413330, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.858398, 38581.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.933258, 38057.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.176000, 42392.468000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(28300.937400, 43587.652000, 2095.120060, 2095.120060, 0.000000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.765381, 37817.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(27503.660309, 38581.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27285.628000, 43906.664000, 1777.072051, 1777.072051, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27.gif
[Tue Nov 29 10:52:39 2011] Mean detx,y = (278.00, 12666.95) 
[Tue Nov 29 10:52:41 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:52:57 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:52:57 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Nov 29 10:52:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Nov 29 14:55:00 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 14:55:00 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:09:07 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:07 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.022, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src27.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 8.5e-13
[Tue Nov 29 15:19:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting