[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (319.1, 503.0) = 5 34 30.06 22 14 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.2 +/- 20.2
  Background counts = 50.2
  Rate = 0.02 +/- 0.004

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 14.91'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 13.88"
[Sun Nov 27 09:34:36 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.174
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 13.88"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85.csv
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85_1.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85.csv
[Sun Nov 27 22:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sun Nov 27 22:37:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sun Nov 27 22:37:42 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 85 centroid is now closest to src. 21
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 21
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 13.88"
[Mon Nov 28 13:20:41 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.174
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 76 for pass 1, mean size = 13.88"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76.csv
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76_1.ximg exists
[Tue Nov 29 05:35:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76.csv
[Tue Nov 29 05:35:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Tue Nov 29 05:35:49 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Tue Nov 29 05:35:49 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 17.088087 pixels away
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 1703.440000, observed total counts = 1699.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 22 = 5.406235 pixels
[Tue Nov 29 05:36:53 2011] Warning, changing simple spatial fit ID from 76 to 87
[Tue Nov 29 05:36:53 2011] 1475.684000 total counts/ 1334.050000 bgd. counts: snr = 3.877765
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.406235 pixels
  Position = (314.2, 505.2) = 5 34 31.61 22 14 27.8
  Extent = 22.2 (12.0-27.3)", rotation angle = 0
  Source counts = 141.6 +/- 38.4
  Background counts = 1334.0
  Rate = 0.02 +/- 0.007
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:44 2011] XMMSAS src. selection expression = ellipse(27285.628000, 43906.664000, 1332.804038, 1332.804038, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22_src.reg
[Tue Nov 29 09:11:44 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (238, 429) - (391, 582)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(27285.628000, 43906.664000, 2221.340064, 4442.680128, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.176000, 42392.468000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(28300.937400, 43587.652000, 2095.120060, 2095.120060, 0.000000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y) && !ellipse(27538.196930, 40146.413330, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22.gif
[Tue Nov 29 10:47:29 2011] Mean detx,y = (455.07, 15982.23) 
[Tue Nov 29 10:47:31 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:48:41 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:48:41 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Nov 29 10:48:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Nov 29 15:09:06 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:07 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.0246, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src22.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 1e-12
[Tue Nov 29 15:19:21 2011] Flag c found in src. 22 procflags, skipping spectral fitting