[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (325.9, 500.1) = 5 34 27.93 22 14 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.8 +/- 20.9
  Background counts = 46.9
  Rate = 0.03 +/- 0.004

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 14.75'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Sun Nov 27 09:34:36 2011] source mask rpix=3.2, npix_max = 53, mask sum = 63, frac = 1.167
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 13.81"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src62.ximg exists
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src62_1.ximg exists
[Sun Nov 27 22:37:37 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src62 appears to have run properly
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sun Nov 27 22:37:41 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Sun Nov 27 22:38:56 2011] Warning, spatial fit 62 centroid is now closest to src. 109
[Sun Nov 27 22:38:56 2011] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.050839 pixels away
[Sun Nov 27 22:38:56 2011] Source 21 is offset by -1.651800 and 5.373228 pixels which is larger than
2 X fitted extent = 1.513540 x 1.513540, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 16
[Sun Nov 27 22:38:56 2011] Source is confused with source 22
[Sun Nov 27 22:38:56 2011] Source is confused with source 109
[Sun Nov 27 22:38:56 2011] Source is confused with source 23
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Mon Nov 28 13:20:41 2011] source mask rpix=3.2, npix_max = 53, mask sum = 63, frac = 1.167
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 54 for pass 1, mean size = 13.81"
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54.csv
[Tue Nov 29 05:35:44 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Nov 29 05:35:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54.csv
[Tue Nov 29 05:35:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Nov 29 05:35:48 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 2130.930000, observed total counts = 2132.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 21 = 4.212191 pixels
[Tue Nov 29 05:36:53 2011] 2018.710000 total counts/ 1062.510000 bgd. counts: snr = 29.334739
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 4.212191 pixels
  Position = (327.2, 504.1) = 5 34 27.53 22 14 22.9
  Extent = 27.6 (26.2-55.2)", rotation angle = 0
  Source counts = 956.2 +/- 44.9
  Background counts = 1062.5
  Rate = 0.2 +/- 0.008
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 2809.280000, observed total counts = 2880.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 21 = 2.855926 pixels
[Tue Nov 29 05:36:53 2011] Warning, changing simple spatial fit ID from 54 to 80
[Tue Nov 29 05:36:53 2011] 2628.792000 total counts/ 2074.130000 bgd. counts: snr = 12.178966
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.855926 pixels
  Position = (325.9, 501.6) = 5 34 27.95 22 14 11.9
  Extent = 26.2 (26.2-26.3)", rotation angle = 0
  Source counts = 554.7 +/- 51.3
  Background counts = 2074.1
  Rate = 0.1 +/- 0.009
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:42 2011] XMMSAS src. selection expression = ellipse(28300.937400, 43587.652000, 1571.340045, 1571.340045, 0.000000, X, Y)
[Tue Nov 29 09:11:42 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21_src.reg
[Tue Nov 29 09:11:42 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (236, 411) - (416, 592)
[Tue Nov 29 09:11:43 2011] XMMSAS bgd. selection expression = annulus(28300.937400, 43587.652000, 2618.900075, 5237.800151, X, Y) && !ellipse(27979.858398, 38581.432861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.933258, 38057.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.176000, 42392.468000, 1067.240031, 1067.240031, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.765381, 37817.886261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(27503.660309, 38581.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27285.628000, 43906.664000, 1777.072051, 1777.072051, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y) && !ellipse(27538.196930, 40146.413330, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:43 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21.gif
[Tue Nov 29 10:21:29 2011] Mean detx,y = (-164.20, 15669.14) 
[Tue Nov 29 10:21:31 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:22:38 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:22:38 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Nov 29 10:22:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Nov 29 15:09:05 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:05 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Nov 29 15:09:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:10 2011] Using photon index=1.80, rate=0.0964, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src21.arf
[Tue Nov 29 15:09:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:10 2011] Updating source flux to 3.3e-12
[Tue Nov 29 15:19:21 2011] Flag b found in src. 21 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag c found in src. 21 procflags, skipping spectral fitting