[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (330.6, 395.3) = 5 34 26.46 22 6 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.7 +/- 26.3
  Background counts = 131.7
  Rate = 0.1 +/- 0.008

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.40'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.812
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.13"
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6.csv
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6.csv
[Sun Nov 27 22:37:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Nov 27 22:37:38 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Nov 27 22:37:38 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Nov 27 22:38:55 2011] Spatial fit model total counts = 3848.760000, observed total counts = 3860.000000
[Sun Nov 27 22:38:55 2011] Offset between fit and detection position for source 20 = 2.000353 pixels
[Sun Nov 27 22:38:55 2011] Warning, changing simple spatial fit ID from 6 to 1
[Sun Nov 27 22:38:55 2011] 3665.126000 total counts/ 3555.450000 bgd. counts: snr = 1.839350
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.000353 pixels
  Position = (332.1, 393.9) = 5 34 26.01 22 6 23.7
  Extent = 12.1 (4.0-20.2)", rotation angle = 0
  Source counts = 109.7 +/- 60.5
  Background counts = 3555.4
  Rate = 0.02 +/- 0.01
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 55
[Sun Nov 27 22:38:56 2011] Source is confused with source 50
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.8, npix_max = 42, mask sum = 27, frac = 0.630
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 12.07"
[Tue Nov 29 05:35:42 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5.csv
[Tue Nov 29 05:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Nov 29 05:35:46 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Nov 29 05:35:46 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 3856.550000, observed total counts = 3860.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 20 = 0.364736 pixels
[Tue Nov 29 05:36:53 2011] Warning, changing simple spatial fit ID from 5 to 1
[Tue Nov 29 05:36:53 2011] 3664.174000 total counts/ 3528.900000 bgd. counts: snr = 2.277166
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.364736 pixels
  Position = (332.5, 393.9) = 5 34 25.89 22 6 23.7
  Extent = 12.4 (4.8-20.8)", rotation angle = 0
  Source counts = 135.3 +/- 60.5
  Background counts = 3528.9
  Rate = 0.02 +/- 0.01
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:37 2011] XMMSAS src. selection expression = ellipse(28875.054000, 34224.836000, 746.604021, 746.604021, 0.000000, X, Y)
[Tue Nov 29 09:11:37 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20_src.reg
[Tue Nov 29 09:11:37 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (290, 351) - (375, 437)
[Tue Nov 29 09:11:37 2011] XMMSAS bgd. selection expression = annulus(28875.054000, 34224.836000, 1244.340036, 2488.680072, X, Y) && !ellipse(28699.703217, 35004.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.644348, 34476.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(28251.616000, 36064.618600, 1731.216050, 1731.216050, 0.000000, X, Y) && !ellipse(26896.004000, 34382.134200, 1462.080042, 1462.080042, 0.000000, X, Y) && !ellipse(29467.312000, 34374.768000, 1653.776048, 1653.776048, 0.000000, X, Y) && !ellipse(27876.811401, 35785.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.218000, 35023.820000, 1250.760036, 1250.760036, 0.000000, X, Y) && !ellipse(27486.981415, 36057.997437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.401947, 35532.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(27857.750946, 36872.470154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28399.780487, 35642.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.051544, 37313.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(29111.694733, 34732.097046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(28791.994690, 36055.029114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(30603.791992, 34191.695038, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:37 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20.gif
[Tue Nov 29 09:17:08 2011] Mean detx,y = (-1270.96, 7021.53) 
[Tue Nov 29 09:17:10 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:17:28 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:17:28 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Nov 29 09:17:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Nov 29 15:09:02 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:02 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Nov 29 15:09:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:07 2011] Using photon index=1.80, rate=0.0235, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src20.arf
[Tue Nov 29 15:09:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:08 2011] Updating source flux to 5e-13
[Tue Nov 29 15:19:21 2011] Flag c found in src. 20 procflags, skipping spectral fitting