[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (318.1, 472.0) = 5 34 30.36 22 12 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.0 +/- 23.6
  Background counts = 54.1
  Rate = 0.04 +/- 0.004

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 12.67'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 12.76"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 12.76"
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49.csv
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49.csv
[Sun Nov 27 22:37:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun Nov 27 22:37:40 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun Nov 27 22:37:40 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sun Nov 27 22:38:55 2011] Spatial fit model total counts = 1719.220000, observed total counts = 1717.000000
[Sun Nov 27 22:38:55 2011] Offset between fit and detection position for source 17 = 1.878426 pixels
[Sun Nov 27 22:38:55 2011] 1750.456300 total counts/ 1690.500000 bgd. counts: snr = 1.458234
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.878426 pixels
  Position = (316.6, 471.0) = 5 34 30.85 22 11 58.8
  Extent = 8.1 (3.2-15.8)", rotation angle = 0
  Source counts = 60.0 +/- 41.8
  Background counts = 1690.5
  Rate = 0.01 +/- 0.007
  Deleting source due to low Poisson probability