[Sat Nov 26 22:29:31 2011] Detection parameters:
  Position = (325.4, 486.1) = 5 34 28.08 22 13 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 301.9 +/- 25.5
  Background counts = 52.1
  Rate = 0.05 +/- 0.004

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 13.75'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 13.30"
[Sun Nov 27 09:34:36 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 13.30"
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30.csv
[Sun Nov 27 22:37:35 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Nov 27 22:37:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30.csv
[Sun Nov 27 22:37:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Nov 27 22:37:39 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Nov 27 22:38:55 2011] Warning, spatial fit 30 centroid is now closest to src. 23
[Sun Nov 27 22:38:55 2011] Source 15 is offset by -1.754026 and -3.619816 pixels which is larger than
2 X fitted extent = 1.494487 x 1.494487, not incorporating fit results
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 16
[Sun Nov 27 22:38:56 2011] Source is confused with source 24
[Mon Nov 28 13:20:41 2011] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 13.30"
[Mon Nov 28 13:20:41 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 13.30"
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src26.ximg exists
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Nov 29 05:35:43 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src26 appears to have run properly
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Nov 29 05:35:47 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 26 centroid is now closest to src. 23
[Tue Nov 29 05:36:53 2011] Spatial fit model total counts = 2047.840000, observed total counts = 2047.000000
[Tue Nov 29 05:36:53 2011] Offset between fit and detection position for source 15 = 2.991224 pixels
[Tue Nov 29 05:36:53 2011] Warning, changing simple spatial fit ID from 26 to 35
[Tue Nov 29 05:36:53 2011] 1755.066000 total counts/ 1651.410000 bgd. counts: snr = 2.550745
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.991224 pixels
  Position = (327.9, 487.8) = 5 34 27.32 22 13 12.1
  Extent = 13.3 (9.3-16.9)", rotation angle = 0
  Source counts = 103.7 +/- 41.9
  Background counts = 1651.4
  Rate = 0.02 +/- 0.007
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:40 2011] XMMSAS src. selection expression = ellipse(28477.176000, 42392.468000, 800.430023, 800.430023, 0.000000, X, Y)
[Tue Nov 29 09:11:40 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15_src.reg
[Tue Nov 29 09:11:40 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (282, 442) - (374, 534)
[Tue Nov 29 09:11:40 2011] XMMSAS bgd. selection expression = annulus(28477.176000, 42392.468000, 1334.050038, 2668.100077, X, Y) && !ellipse(28178.342600, 40355.446000, 759.009622, 759.009622, 0.000000, X, Y) && !ellipse(28057.114441, 39191.415222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(28378.122000, 39993.554000, 1512.704044, 1512.704044, 0.000000, X, Y) && !ellipse(28406.736000, 41385.993600, 1856.472053, 1856.472053, 0.000000, X, Y) && !ellipse(28554.855438, 39720.737793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.112600, 42594.998000, 2146.584062, 268.322408, 93.139000, X, Y) && !ellipse(28300.937400, 43587.652000, 2095.120060, 2095.120060, 0.000000, X, Y) && !ellipse(27618.798309, 41544.339355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28680.956055, 41533.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.194000, 38206.764000, 1847.640053, 1847.640053, 0.000000, X, Y) && !ellipse(27285.628000, 43906.664000, 1777.072051, 1777.072051, 0.000000, X, Y) && !ellipse(27916.268000, 42285.502000, 2383.952069, 2383.952069, 0.000000, X, Y) && !ellipse(28329.862600, 44015.544000, 2205.536063, 2205.536063, 0.000000, X, Y) && !ellipse(27538.196930, 40146.413330, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:40 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15.gif
[Tue Nov 29 09:53:03 2011] Mean detx,y = (-425.90, 14933.24) 
[Tue Nov 29 09:53:06 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 09:53:30 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 09:53:31 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Nov 29 09:53:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Nov 29 15:09:03 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:04 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Nov 29 15:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:09 2011] Using photon index=1.80, rate=0.018, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src15.arf
[Tue Nov 29 15:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:09 2011] Updating source flux to 6.2e-13
[Tue Nov 29 15:19:21 2011] Flag b found in src. 15 procflags, skipping spectral fitting
[Tue Nov 29 15:19:21 2011] Flag c found in src. 15 procflags, skipping spectral fitting