[Sat Nov 26 22:29:34 2011] Detection parameters:
  Position = (336.2, 233.1) = 5 34 24.73 21 54 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.9 +/- 18.7
  Background counts = 213.9
  Rate = 0.05 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 5.47'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 9.17"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.104
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 9.17"
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33.csv
[Sun Nov 27 22:37:36 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Nov 27 22:37:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33.csv
[Sun Nov 27 22:37:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Nov 27 22:37:39 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Nov 27 22:37:39 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Nov 27 22:38:55 2011] Spatial fit model total counts = 1937.340000, observed total counts = 1974.000000
[Sun Nov 27 22:38:55 2011] Offset between fit and detection position for source 104 = 0.470499 pixels
[Sun Nov 27 22:38:55 2011] 1655.599000 total counts/ 973.110000 bgd. counts: snr = 21.878356
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 0.470499 pixels
  Position = (336.7, 233.0) = 5 34 24.59 21 54 43.7
  Extent = 18.3 (18.3-18.3)", rotation angle = 0
  Source counts = 682.5 +/- 40.7
  Background counts = 973.1
  Rate = 0.1 +/- 0.007
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 108
[Sun Nov 27 22:38:56 2011] Source is confused with source 101
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 18.32"
[Mon Nov 28 13:20:41 2011] source mask rpix=4.2, npix_max = 88, mask sum = 72, frac = 0.811
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 18.32"
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29.csv
[Tue Nov 29 05:35:43 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Nov 29 05:35:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29.csv
[Tue Nov 29 05:35:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Nov 29 05:35:47 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Nov 29 05:35:47 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 29 centroid is now closest to src. 53
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:40 2011] XMMSAS src. selection expression = ellipse(29241.499000, 20223.375400, 1099.224032, 1099.224032, 0.000000, X, Y)
[Tue Nov 29 09:11:40 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104_src.reg
[Tue Nov 29 09:11:40 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (273, 170) - (400, 296)
[Tue Nov 29 09:11:40 2011] XMMSAS bgd. selection expression = annulus(29241.499000, 20223.375400, 1832.040053, 3664.080105, X, Y) && !ellipse(28194.442000, 19111.874000, 1483.312043, 1483.312043, 0.000000, X, Y) && !ellipse(27185.053780, 19989.908600, 479.278414, 479.278414, 0.000000, X, Y) && !ellipse(27495.065200, 20266.482000, 1419.904041, 1419.904041, 0.000000, X, Y) && !ellipse(33751.000000, 24380.591827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.000000, 18548.160202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.599762, 20406.235992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26790.992035, 18986.552002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26034.786180, 20381.243140, 1187.456034, 1187.456034, 0.000000, X, Y) && !ellipse(27253.258400, 19811.512000, 1467.704042, 1467.704042, 0.000000, X, Y) && !ellipse(26521.519836, 19454.267273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28888.572000, 19243.907400, 1516.504044, 533.845615, 358.959840, X, Y) && !ellipse(26324.368860, 18565.880340, 737.152821, 737.152821, 0.000000, X, Y) && !ellipse(26584.117462, 20355.621841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33667.024078, 22423.110413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.982000, 20257.537400, 1464.696042, 1464.696042, 0.000000, X, Y) && !ellipse(33668.619751, 23456.575256, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov 29 09:11:40 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104.gif
[Tue Nov 29 10:07:33 2011] Mean detx,y = (-2376.21, -7400.51) 
[Tue Nov 29 10:07:36 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:08:07 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:08:07 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Tue Nov 29 10:08:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Tue Nov 29 15:09:04 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:04 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Tue Nov 29 15:09:09 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:09 2011] Using photon index=1.80, rate=0.119, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src104.arf
[Tue Nov 29 15:09:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:09 2011] Updating source flux to 1.9e-12
[Tue Nov 29 15:19:21 2011] Flag c found in src. 104 procflags, skipping spectral fitting