[Sat Nov 26 22:29:30 2011] Detection parameters:
  Position = (277.8, 397.0) = 5 34 42.99 22 6 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.2 +/- 32.3
  Background counts = 140.9
  Rate = 0.03 +/- 0.006

[Sat Nov 26 22:29:35 2011] Off-axis axis estimate = 7.30'
[Sun Nov 27 09:34:36 2011] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 09:34:36 2011] Initial guess for spatial extent in simple fitting = 10.08"
[Sun Nov 27 09:34:36 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Sun Nov 27 09:34:36 2011] Giving source the simple spatial ID 79 for pass 0, mean size = 10.08"
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79.csv
[Sun Nov 27 22:37:37 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79_1.ximg exists
[Sun Nov 27 22:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79.csv
[Sun Nov 27 22:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sun Nov 27 22:37:41 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sun Nov 27 22:37:41 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sun Nov 27 22:38:56 2011] Spatial fit model total counts = 1274.890000, observed total counts = 1316.000000
[Sun Nov 27 22:38:56 2011] Offset between fit and detection position for source 1 = 1.870537 pixels
[Sun Nov 27 22:38:56 2011] 886.987000 total counts/ 481.508000 bgd. counts: snr = 18.478496
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.870537 pixels
  Position = (276.1, 396.2) = 5 34 43.52 22 6 33.6
  Extent = 11.5 (10.1-12.9)", rotation angle = 0
  Source counts = 405.5 +/- 29.8
  Background counts = 481.5
  Rate = 0.07 +/- 0.005
[Sun Nov 27 22:38:56 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:56 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:56 2011] Source does appear to be extended
[Sun Nov 27 22:38:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:56 2011] Source is confused with source 57
[Sun Nov 27 22:38:56 2011] Source is confused with source 11
[Mon Nov 28 13:20:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 13:20:41 2011] Initial guess for spatial extent in simple fitting = 11.53"
[Mon Nov 28 13:20:41 2011] source mask rpix=2.6, npix_max = 39, mask sum = 24, frac = 0.605
[Mon Nov 28 13:20:41 2011] Giving source the simple spatial ID 70 for pass 1, mean size = 11.53"
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src70.ximg exists
[Tue Nov 29 05:35:45 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Nov 29 05:35:45 2011] Fit fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_src70 appears to have run properly
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Nov 29 05:35:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Nov 29 05:35:48 2011] fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Nov 29 05:35:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Nov 29 05:35:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:53 2011] Warning, spatial fit 70 centroid is now closest to src. 56
[Tue Nov 29 05:36:53 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:53 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 05:36:53 2011] Source does appear to be extended
[Tue Nov 29 05:36:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:11:43 2011] XMMSAS src. selection expression = ellipse(23975.910600, 34422.076000, 691.572020, 691.572020, 0.000000, X, Y)
[Tue Nov 29 09:11:43 2011] Writing source region out to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1_src.reg
[Tue Nov 29 09:11:43 2011] Extracting stamp from image fullrun_mos2_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (236, 356) - (316, 436)
[Tue Nov 29 09:11:44 2011] XMMSAS bgd. selection expression = annulus(23975.910600, 34422.076000, 1152.620033, 2305.240066, X, Y) && !ellipse(27250.496000, 34324.982600, 1593.488046, 1593.488046, 0.000000, X, Y) && !ellipse(26896.004000, 34382.134200, 1462.080042, 1462.080042, 0.000000, X, Y) && !ellipse(25112.668365, 34493.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.004000, 34425.325000, 1602.952046, 1602.952046, 0.000000, X, Y) && !ellipse(25833.730000, 34341.955200, 1594.096046, 1594.096046, 0.000000, X, Y) && !ellipse(26272.296189, 34324.800719, 1594.773091, 905.273387, 5.273372, X, Y) && !ellipse(28131.770000, 37072.742000, 3461.952100, 3461.952100, 0.000000, X, Y) && !ellipse(25830.178000, 35451.262000, 1644.320047, 1644.320047, 0.000000, X, Y) && !ellipse(26408.630000, 36373.380000, 1675.264048, 1675.264048, 0.000000, X, Y) && !ellipse(20279.984200, 31869.594000, 1590.704046, 1590.704046, 0.000000, X, Y) && !ellipse(23528.245117, 34476.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22480.976000, 34587.935200, 1642.784047, 1642.784047, 0.000000, X, Y)
[Tue Nov 29 09:11:44 2011] Writing fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1.gif
[Tue Nov 29 10:37:41 2011] Mean detx,y = (3572.91, 6881.48) 
[Tue Nov 29 10:37:44 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 10:38:10 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 10:38:10 2011] Setting source spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 10:38:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Nov 29 15:09:06 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:09:06 2011] Error reading totcts from fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Nov 29 15:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:11 2011] Using photon index=1.80, rate=0.0705, arf fullrun_mos2_xmm0412590601_pi300-10000_pass1_cl_src1.arf
[Tue Nov 29 15:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:11 2011] Updating source flux to 1.6e-12
[Tue Nov 29 15:19:21 2011] Flag c found in src. 1 procflags, skipping spectral fitting