[Sat Nov 26 22:28:13 2011] Detection parameters: Position = (399.6, 273.1) = 5 34 4.91 21 57 36.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 144.5 +/- 21.3 Background counts = 146.5 Rate = 0.04 +/- 0.006 [Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 7.56' [Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting [Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.21" [Sat Nov 26 22:32:53 2011] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.864 [Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 77 for pass 0, mean size = 10.21" [Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77.ximg exists [Sun Nov 27 09:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77.csv [Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77_1.ximg exists [Sun Nov 27 09:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77.csv [Sun Nov 27 09:34:32 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src77.ximg exists [Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists [Sun Nov 27 09:34:35 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly [Sun Nov 27 22:38:19 2011] Warning, spatial fit 77 centroid is now closest to src. 78 [Sun Nov 27 22:38:19 2011] Source 80 is offset by -3.692705 and -2.205431 pixels which is larger than 2 X fitted extent = 1.161545 x 1.161545, not incorporating fit results [Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000 [Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Nov 27 22:38:19 2011] Assessing source extent using major [Sun Nov 27 22:38:19 2011] Source does appear to be extended [Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Nov 27 22:38:19 2011] Source is confused with source 79 [Sun Nov 27 22:39:25 2011] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting [Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 10.21" [Sun Nov 27 22:39:25 2011] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.864 [Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 66 for pass 1, mean size = 10.21" [Mon Nov 28 13:20:37 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66.ximg exists [Mon Nov 28 13:20:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66.csv [Mon Nov 28 13:20:37 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66_1.ximg exists [Mon Nov 28 13:20:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66.csv [Mon Nov 28 13:20:37 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Nov 28 13:20:40 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src66.ximg exists [Mon Nov 28 13:20:40 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists [Mon Nov 28 13:20:40 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly [Tue Nov 29 05:36:19 2011] Spatial fit model total counts = 2265.000000, observed total counts = 2270.000000 [Tue Nov 29 05:36:19 2011] Offset between fit and detection position for source 80 = 5.943948 pixels [Tue Nov 29 05:36:19 2011] 1993.253000 total counts/ 1664.470000 bgd. counts: snr = 8.058818 Spatial fit parameters: Offset between fit and detection position for source 80 = 5.943948 pixels Position = (396.7, 278.3) = 5 34 5.82 21 58 0.4 Extent = 15.1 (6.7-20.4)", rotation angle = 0 Source counts = 328.8 +/- 44.6 Background counts = 1664.5 Rate = 0.06 +/- 0.008 [Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000 [Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Nov 29 05:36:19 2011] Assessing source extent using major axis lower bound [Tue Nov 29 05:36:19 2011] Source does appear to be extended [Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Nov 29 05:37:25 2011] XMMSAS src. selection expression = ellipse(34462.604000, 24160.470000, 904.230026, 904.230026, 0.000000, X, Y) [Tue Nov 29 05:37:25 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80_src.reg [Tue Nov 29 05:37:25 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (345, 226) - (449, 330) [Tue Nov 29 05:37:26 2011] XMMSAS bgd. selection expression = annulus(34462.604000, 24160.470000, 1507.050043, 3014.100087, X, Y) && !ellipse(34552.868000, 26838.542000, 748.134422, 748.134422, 0.000000, X, Y) && !ellipse(34024.863617, 25347.614563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.063171, 24775.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33838.002655, 22399.560303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35106.527863, 26580.965942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.588000, 26107.306000, 1624.872047, 1624.872047, 0.000000, X, Y) && !ellipse(34044.688721, 27578.293182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34106.495148, 25788.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33778.941528, 20834.690018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34706.693726, 21798.474945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34092.136749, 21869.028366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34533.166000, 25687.886000, 1635.152047, 981.312028, 90.000000, X, Y) && !ellipse(34960.235748, 24926.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34323.788400, 24404.300000, 2060.888059, 2060.888059, 0.000000, X, Y) && !ellipse(34208.166840, 23624.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34248.568420, 23011.897675, 870.000000, 870.000000, 0.000000, X, Y) [Tue Nov 29 05:37:26 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80.gif [Tue Nov 29 06:55:04 2011] Mean detx,y = (-2749.38, 7221.77) [Tue Nov 29 06:55:07 2011] Setting backscal keywords in source and bgd. spectrum [Tue Nov 29 06:55:22 2011] Binned source spectrum to 10 counts/bin [Tue Nov 29 06:55:22 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80_src_b10.pi.gz [Tue Nov 29 06:55:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80_bgd.pi.gz [Tue Nov 29 15:08:58 2011] Updating aperture counts using extracted products [Tue Nov 29 15:08:58 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80_src_b10.pi.gz [Tue Nov 29 15:09:02 2011] Calculating source flux in energy range 0.30-8.00 [Tue Nov 29 15:09:02 2011] Using photon index=1.80, rate=0.0572, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src80.arf [Tue Nov 29 15:09:02 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Nov 29 15:09:02 2011] Updating source flux to 8.4e-13 [Tue Nov 29 15:09:14 2011] Flag b found in src. 80 procflags, skipping spectral fitting [Tue Nov 29 15:09:14 2011] Flag c found in src. 80 procflags, skipping spectral fitting