[Sat Nov 26 22:28:12 2011] Detection parameters:
  Position = (408.7, 287.7) = 5 34 2.05 21 58 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.2 +/- 18.9
  Background counts = 138.3
  Rate = 0.02 +/- 0.005

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 8.03'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.45"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.040
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 10.45"
[Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73.ximg exists
[Sun Nov 27 09:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73.csv
[Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun Nov 27 09:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73.csv
[Sun Nov 27 09:34:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun Nov 27 09:34:35 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sun Nov 27 22:38:19 2011] Spatial fit model total counts = 2471.900000, observed total counts = 2470.000000
[Sun Nov 27 22:38:19 2011] Offset between fit and detection position for source 76 = 1.683929 pixels
[Sun Nov 27 22:38:19 2011] Warning, changing simple spatial fit ID from 73 to 71
[Sun Nov 27 22:38:19 2011] 2399.016400 total counts/ 2368.720000 bgd. counts: snr = 0.622493
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 1.683929 pixels
  Position = (410.3, 288.2) = 5 34 1.55 21 58 43.7
  Extent = 5.4 (3.0-7.0)", rotation angle = 0
  Source counts = 30.3 +/- 49.0
  Background counts = 2368.7
  Rate = 0.005 +/- 0.009
  Deleting source due to low Poisson probability