[Sat Nov 26 22:28:12 2011] Detection parameters:
  Position = (394.8, 382.9) = 5 34 6.39 22 5 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 16.8
  Background counts = 105.9
  Rate = 0.04 +/- 0.005

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 9.29'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 11.07"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.5, npix_max = 37, mask sum = 20, frac = 0.539
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 11.07"
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63.csv
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63.csv
[Sun Nov 27 09:34:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Nov 27 09:34:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Nov 27 09:34:35 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun Nov 27 22:38:19 2011] Warning, spatial fit 63 centroid is now closest to src. 62
[Sun Nov 27 22:38:19 2011] Spatial fit model total counts = 1524.840000, observed total counts = 1519.000000
[Sun Nov 27 22:38:19 2011] Offset between fit and detection position for source 66 = 3.980497 pixels
[Sun Nov 27 22:38:19 2011] Warning, changing simple spatial fit ID from 63 to 64
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 3.980497 pixels
  Position = (396.7, 379.4) = 5 34 5.80 22 5 20.3
  Extent = 22.6 (22.5-22.6)", rotation angle = 0
  Source counts = 1478.5 +/- 38.5
  Background counts = 0.0
  Rate = 0.3 +/- 0.007
 Deleting source due to low signal-to-noise ratio