[Sat Nov 26 22:28:11 2011] Detection parameters:
  Position = (387.0, 397.3) = 5 34 8.81 22 6 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.8 +/- 17.9
  Background counts = 72.6
  Rate = 0.03 +/- 0.006

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 9.62'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 11.24"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.736
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 11.24"
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55.csv
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55.csv
[Sun Nov 27 09:34:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:34 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Nov 27 09:34:34 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Nov 27 09:34:34 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Nov 27 22:38:19 2011] Source 58 is offset by -2.360194 and 0.652003 pixels which is larger than
2 X fitted extent = 1.299246 x 1.299246, not incorporating fit results
[Sun Nov 27 22:38:19 2011] Warning, spatial fit 55 centroid is now closest to src. 50
[Sun Nov 27 22:38:19 2011] Source 58 is offset by -6.077803 and -4.853560 pixels which is larger than
2 X fitted extent = 1.263949 x 1.263949, not incorporating fit results
[Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:19 2011] Assessing source extent using major
[Sun Nov 27 22:38:19 2011] Source does appear to be extended
[Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:19 2011] Source is confused with source 57
[Sun Nov 27 22:39:25 2011] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 11.24"
[Sun Nov 27 22:39:25 2011] source mask rpix=2.6, npix_max = 38, mask sum = 28, frac = 0.736
[Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 48 for pass 1, mean size = 11.24"
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src48.ximg exists
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Nov 28 13:20:36 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src48 appears to have run properly
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Nov 28 13:20:39 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue Nov 29 05:36:19 2011] Warning, spatial fit 48 centroid is now closest to src. 62
[Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:19 2011] Assessing source extent using major
[Tue Nov 29 05:36:19 2011] Source does appear to be extended
[Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:37:23 2011] XMMSAS src. selection expression = ellipse(33623.439117, 34512.948273, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:37:23 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58_src.reg
[Tue Nov 29 05:37:23 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (350, 360) - (425, 435)
[Tue Nov 29 05:37:23 2011] XMMSAS bgd. selection expression = annulus(33623.439117, 34512.948273, 1087.500000, 2175.000000, X, Y) && !ellipse(34245.663818, 33996.898193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.226600, 34020.086000, 1005.192029, 1005.192029, 0.000000, X, Y) && !ellipse(35317.007965, 31997.812469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31437.341095, 34087.955078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.110504, 34078.102264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34223.474000, 31830.211000, 1752.056050, 1752.056050, 0.000000, X, Y) && !ellipse(34351.070000, 30971.384000, 1721.568050, 1721.568050, 0.000000, X, Y) && !ellipse(31979.394531, 34747.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31393.742859, 34754.832062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.129242, 34977.604950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.117310, 34645.667877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30376.870000, 34196.922400, 1655.120048, 1655.120048, 0.000000, X, Y) && !ellipse(30484.490000, 34176.287600, 1666.432048, 1666.432048, 0.000000, X, Y) && !ellipse(33411.140000, 34078.464000, 1794.752052, 1794.752052, 0.000000, X, Y) && !ellipse(35337.273804, 33788.499634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34879.376831, 33788.919128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34449.468000, 33375.610000, 1847.120053, 1847.120053, 19.616700, X, Y) && !ellipse(35547.002533, 33030.395844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35243.431793, 32528.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34292.080000, 32153.222000, 1638.576047, 1638.576047, 0.000000, X, Y) && !ellipse(35782.403200, 31166.072000, 1685.712049, 1685.712049, 0.000000, X, Y)
[Tue Nov 29 05:37:23 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58.gif
[Tue Nov 29 06:08:45 2011] Mean detx,y = (7511.40, 5769.85) 
[Tue Nov 29 06:08:47 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:09:11 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:09:11 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Nov 29 06:09:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue Nov 29 08:06:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 08:06:04 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:08:57 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:08:57 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Nov 29 15:09:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:01 2011] Using photon index=1.80, rate=0.0347, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src58.arf
[Tue Nov 29 15:09:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:01 2011] Updating source flux to 6.5e-13
[Tue Nov 29 15:09:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting