[Sat Nov 26 22:28:11 2011] Detection parameters:
  Position = (311.2, 401.8) = 5 34 32.55 22 7 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.5 +/- 23.8
  Background counts = 229.7
  Rate = 0.03 +/- 0.006

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 7.55'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.20"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 10.20"
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50.csv
[Sun Nov 27 09:34:31 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Nov 27 09:34:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50.csv
[Sun Nov 27 09:34:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:34 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Nov 27 09:34:34 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Nov 27 09:34:34 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sun Nov 27 22:38:19 2011] Spatial fit model total counts = 3222.170000, observed total counts = 3225.000000
[Sun Nov 27 22:38:19 2011] Offset between fit and detection position for source 53 = 8.701223 pixels
[Sun Nov 27 22:38:19 2011] 3150.557000 total counts/ 2837.310000 bgd. counts: snr = 5.880761
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 8.701223 pixels
  Position = (305.0, 407.9) = 5 34 34.50 22 7 24.4
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source counts = 313.2 +/- 56.1
  Background counts = 2837.3
  Rate = 0.05 +/- 0.01
[Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:19 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 22:38:19 2011] Source does appear to be extended
[Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:19 2011] Source is confused with source 48
[Sun Nov 27 22:39:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 20.41"
[Sun Nov 27 22:39:25 2011] source mask rpix=4.7, npix_max = 107, mask sum = 96, frac = 0.891
[Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 20.41"
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43.ximg exists
[Mon Nov 28 13:20:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43.csv
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Nov 28 13:20:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43.csv
[Mon Nov 28 13:20:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Nov 28 13:20:39 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Nov 29 05:36:19 2011] Spatial fit model total counts = 3738.580000, observed total counts = 3727.000000
[Tue Nov 29 05:36:19 2011] Offset between fit and detection position for source 53 = 3.644283 pixels
[Tue Nov 29 05:36:19 2011] Warning, changing simple spatial fit ID from 43 to 39
[Tue Nov 29 05:36:19 2011] 3697.280040 total counts/ 3697.280000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 3.644283 pixels
  Position = (306.7, 404.7) = 5 34 33.96 22 7 10.5
  Extent = 21.4 (21.3-42.7)", rotation angle = 0
  Source counts = 0.0 +/- 60.8
  Background counts = 3697.3
  Rate = 7e-09 +/- 0.01
  Deleting source due to low Poisson probability