[Sat Nov 26 22:28:10 2011] Detection parameters:
  Position = (329.8, 455.9) = 5 34 26.73 22 10 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 16.0
  Background counts = 72.2
  Rate = 0.01 +/- 0.003

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 11.64'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 12.25"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.955
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 12.25"
[Sun Nov 27 09:34:29 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39.ximg exists
[Sun Nov 27 09:34:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39.csv
[Sun Nov 27 09:34:30 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Nov 27 09:34:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39.csv
[Sun Nov 27 09:34:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Nov 27 09:34:33 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Nov 27 22:38:19 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.843404 pixels away
[Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:19 2011] Assessing source extent using major
[Sun Nov 27 22:38:19 2011] Source does appear to be extended
[Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:19 2011] Source is confused with source 15
[Sun Nov 27 22:38:19 2011] Source is confused with source 41
[Sun Nov 27 22:38:19 2011] Source is confused with source 44
[Sun Nov 27 22:39:25 2011] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 12.25"
[Sun Nov 27 22:39:25 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.955
[Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.25"
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33.ximg exists
[Mon Nov 28 13:20:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33.csv
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Nov 28 13:20:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33.csv
[Mon Nov 28 13:20:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Nov 28 13:20:39 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Nov 28 13:20:39 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Nov 29 05:36:19 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 18.310610 pixels away
[Tue Nov 29 05:36:19 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 11.060943 pixels away
[Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:19 2011] Assessing source extent using major
[Tue Nov 29 05:36:19 2011] Source does appear to be extended
[Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:37:22 2011] XMMSAS src. selection expression = ellipse(28640.955383, 39612.200195, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:37:22 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42_src.reg
[Tue Nov 29 05:37:22 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (292, 418) - (367, 493)
[Tue Nov 29 05:37:22 2011] XMMSAS bgd. selection expression = annulus(28640.955383, 39612.200195, 1087.500000, 2175.000000, X, Y) && !ellipse(27885.397766, 39971.752228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.558960, 39602.796000, 924.544027, 924.544027, 0.000000, X, Y) && !ellipse(28104.855000, 41520.584000, 2459.096071, 2459.096071, 0.000000, X, Y) && !ellipse(27666.836000, 38863.074000, 1389.688040, 1389.688040, 0.000000, X, Y) && !ellipse(28341.034000, 42778.934000, 2149.048062, 550.993616, 346.279000, X, Y) && !ellipse(27400.005310, 41805.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27899.576000, 41164.044000, 928.288027, 928.288027, 0.000000, X, Y) && !ellipse(28215.046920, 40655.422000, 1996.072057, 1996.072057, 0.000000, X, Y) && !ellipse(27049.137878, 39818.772095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.848785, 39190.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.210160, 38589.738000, 1844.000053, 1844.000053, 0.000000, X, Y) && !ellipse(27739.639313, 37032.669312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28169.730600, 43237.366000, 2149.048062, 2149.048062, 0.000000, X, Y)
[Tue Nov 29 05:37:22 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42.gif
[Tue Nov 29 06:02:50 2011] Mean detx,y = (12368.67, 599.62) 
[Tue Nov 29 06:02:53 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 06:03:04 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 06:03:05 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Nov 29 06:03:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Nov 29 07:59:07 2011] Not generating rmf since there are only 66 counts
[Tue Nov 29 07:59:07 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:08:56 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:08:57 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Nov 29 15:09:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:00 2011] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src42.arf
[Tue Nov 29 15:09:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:00 2011] Updating source flux to 2.6e-13
[Tue Nov 29 15:09:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting