[Sat Nov 26 22:28:07 2011] Detection parameters: Position = (328.3, 393.8) = 5 34 27.21 22 6 13.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 236.2 +/- 23.7 Background counts = 243.8 Rate = 0.07 +/- 0.007 [Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 7.24' [Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting [Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.05" [Sat Nov 26 22:32:53 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949 [Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.05" [Sun Nov 27 09:34:28 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3.ximg exists [Sun Nov 27 09:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3.csv [Sun Nov 27 09:34:28 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3_1.ximg exists [Sun Nov 27 09:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3.csv [Sun Nov 27 09:34:28 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun Nov 27 09:34:32 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun Nov 27 09:34:32 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sun Nov 27 22:38:19 2011] Warning, spatial fit 3 centroid is now closest to src. 49 [Sun Nov 27 22:38:19 2011] Spatial fit model total counts = 3181.370000, observed total counts = 3181.000000 [Sun Nov 27 22:38:19 2011] Offset between fit and detection position for source 4 = 5.727758 pixels [Sun Nov 27 22:38:19 2011] Warning, changing simple spatial fit ID from 3 to 46 [Sun Nov 27 22:38:19 2011] 3038.980019 total counts/ 3038.980000 bgd. counts: snr = 0.000000 Spatial fit parameters: Offset between fit and detection position for source 4 = 5.727758 pixels Position = (329.6, 399.4) = 5 34 26.77 22 6 47.3 Extent = 21.0 (20.9-41.9)", rotation angle = 0 Source counts = 0.0 +/- 55.1 Background counts = 3039.0 Rate = 3e-09 +/- 0.01 Deleting source due to low Poisson probability