[Sat Nov 26 22:28:09 2011] Detection parameters:
  Position = (391.9, 317.5) = 5 34 7.31 22 0 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.2 +/- 22.3
  Background counts = 185.8
  Rate = 0.05 +/- 0.006

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 6.91'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 9.89"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.553
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 9.89"
[Sun Nov 27 09:34:29 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29.ximg exists
[Sun Nov 27 09:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29.csv
[Sun Nov 27 09:34:29 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Nov 27 09:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29.csv
[Sun Nov 27 09:34:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Nov 27 09:34:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Nov 27 09:34:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Nov 27 09:34:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:38:19 2011] Source 32 is offset by 8.409778 and -0.652193 pixels which is larger than
2 X fitted extent = 7.912690 x 1.275191, not incorporating fit results
[Sun Nov 27 22:38:19 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.451460 pixels away
[Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:19 2011] Assessing source extent using major
[Sun Nov 27 22:38:19 2011] Source does appear to be extended
[Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:19 2011] Source is confused with source 7
[Sun Nov 27 22:39:25 2011] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 9.89"
[Sun Nov 27 22:39:25 2011] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.553
[Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 9.89"
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src25.ximg exists
[Mon Nov 28 13:20:36 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Nov 28 13:20:36 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src25 appears to have run properly
[Mon Nov 28 13:20:38 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Nov 28 13:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Nov 28 13:20:38 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Nov 28 13:20:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Nov 28 13:20:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:19 2011] Warning, spatial fit 25 centroid is now closest to src. 33
[Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:19 2011] Assessing source extent using major
[Tue Nov 29 05:36:19 2011] Source does appear to be extended
[Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:37:21 2011] XMMSAS src. selection expression = ellipse(34044.688721, 27578.293182, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:37:21 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32_src.reg
[Tue Nov 29 05:37:21 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (354, 280) - (429, 355)
[Tue Nov 29 05:37:22 2011] XMMSAS bgd. selection expression = annulus(34044.688721, 27578.293182, 1087.500000, 2175.000000, X, Y) && !ellipse(35403.997345, 29345.130219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.868000, 26838.542000, 748.134422, 748.134422, 0.000000, X, Y) && !ellipse(34024.863617, 25347.614563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.063171, 24775.822144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 29435.119781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.343903, 28929.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35220.484375, 28465.325195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35106.527863, 26580.965942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.588000, 26107.306000, 1624.872047, 1624.872047, 0.000000, X, Y) && !ellipse(34351.070000, 30971.384000, 1721.568050, 1721.568050, 0.000000, X, Y) && !ellipse(34249.991516, 28055.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34106.495148, 25788.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.403200, 31166.072000, 1685.712049, 1685.712049, 0.000000, X, Y) && !ellipse(34591.069855, 29876.884796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34533.166000, 25687.886000, 1635.152047, 981.312028, 90.000000, X, Y) && !ellipse(34960.235748, 24926.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34323.788400, 24404.300000, 2060.888059, 2060.888059, 0.000000, X, Y)
[Tue Nov 29 05:37:22 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32.gif
[Tue Nov 29 05:58:28 2011] Mean detx,y = (708.92, 6849.89) 
[Tue Nov 29 05:58:30 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:58:52 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:58:53 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Nov 29 05:58:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Nov 29 07:49:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 07:49:57 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:08:56 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:08:56 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Nov 29 15:09:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:09:00 2011] Using photon index=1.80, rate=0.0548, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src32.arf
[Tue Nov 29 15:09:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:09:00 2011] Updating source flux to 9.7e-13
[Tue Nov 29 15:09:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting