[Sat Nov 26 22:28:09 2011] Detection parameters: Position = (395.2, 353.0) = 5 34 6.27 22 3 26.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 223.3 +/- 25.2 Background counts = 156.8 Rate = 0.05 +/- 0.006 [Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 8.05' [Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting [Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.45" [Sat Nov 26 22:32:53 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890 [Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 10.45" [Sun Nov 27 09:34:29 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27.ximg exists [Sun Nov 27 09:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27.csv [Sun Nov 27 09:34:29 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27_1.ximg exists [Sun Nov 27 09:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27.csv [Sun Nov 27 09:34:29 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Sun Nov 27 09:34:33 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly [Sun Nov 27 22:38:19 2011] Source 30 is offset by -0.639280 and -5.833891 pixels which is larger than 2 X fitted extent = 1.275191 x 1.275191, not incorporating fit results [Sun Nov 27 22:38:19 2011] Spatial fit model total counts = 2083.290000, observed total counts = 2085.000000 [Sun Nov 27 22:38:19 2011] Offset between fit and detection position for source 30 = 3.593723 pixels [Sun Nov 27 22:38:19 2011] Warning, changing simple spatial fit ID from 27 to 14 [Sun Nov 27 22:38:19 2011] 2055.798000 total counts/ 1711.130000 bgd. counts: snr = 8.332196 Spatial fit parameters: Offset between fit and detection position for source 30 = 3.593723 pixels Position = (395.4, 356.6) = 5 34 6.20 22 3 40.9 Extent = 21.5 (21.0-21.8)", rotation angle = 0 Source counts = 344.7 +/- 45.3 Background counts = 1711.1 Rate = 0.06 +/- 0.008 [Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000 [Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Nov 27 22:38:19 2011] Assessing source extent using major axis lower bound [Sun Nov 27 22:38:19 2011] Source does appear to be extended [Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Nov 27 22:38:19 2011] Source is confused with source 16 [Sun Nov 27 22:39:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 21.52" [Sun Nov 27 22:39:25 2011] source mask rpix=4.9, npix_max = 118, mask sum = 86, frac = 0.725 [Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 21.52" [Mon Nov 28 13:20:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23.ximg exists [Mon Nov 28 13:20:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23.csv [Mon Nov 28 13:20:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23_1.ximg exists [Mon Nov 28 13:20:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23.csv [Mon Nov 28 13:20:35 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Nov 28 13:20:38 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Mon Nov 28 13:20:38 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Mon Nov 28 13:20:38 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Tue Nov 29 05:36:19 2011] Warning, spatial fit 23 centroid is now closest to src. 62 [Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000 [Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Nov 29 05:36:19 2011] Assessing source extent using major axis lower bound [Tue Nov 29 05:36:19 2011] Source does appear to be extended [Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Nov 29 05:37:21 2011] XMMSAS src. selection expression = ellipse(34351.070000, 30971.384000, 1291.176037, 1291.176037, 0.000000, X, Y) [Tue Nov 29 05:37:21 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30_src.reg [Tue Nov 29 05:37:21 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (321, 282) - (470, 431) [Tue Nov 29 05:37:21 2011] XMMSAS bgd. selection expression = annulus(34351.070000, 30971.384000, 2151.960062, 4303.920124, X, Y) && !ellipse(35403.997345, 29345.130219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.663818, 33996.898193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.226600, 34020.086000, 1005.192029, 1005.192029, 0.000000, X, Y) && !ellipse(35317.007965, 31997.812469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.868000, 26838.542000, 748.134422, 748.134422, 0.000000, X, Y) && !ellipse(35195.837738, 31202.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 29435.119781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.343903, 28929.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35220.484375, 28465.325195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35106.527863, 26580.965942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.588000, 26107.306000, 1624.872047, 1624.872047, 0.000000, X, Y) && !ellipse(31437.341095, 34087.955078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.110504, 34078.102264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34223.474000, 31830.211000, 1752.056050, 1752.056050, 0.000000, X, Y) && !ellipse(34249.991516, 28055.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.688721, 27578.293182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31979.394531, 34747.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31393.742859, 34754.832062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.129242, 34977.604950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.117310, 34645.667877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33623.439117, 34512.948273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30376.870000, 34196.922400, 1655.120048, 1655.120048, 0.000000, X, Y) && !ellipse(30484.490000, 34176.287600, 1666.432048, 1666.432048, 0.000000, X, Y) && !ellipse(29261.613400, 34004.788000, 1626.784047, 478.210414, 184.589000, X, Y) && !ellipse(33411.140000, 34078.464000, 1794.752052, 1794.752052, 0.000000, X, Y) && !ellipse(35337.273804, 33788.499634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34879.376831, 33788.919128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34449.468000, 33375.610000, 1847.120053, 1847.120053, 19.616700, X, Y) && !ellipse(35547.002533, 33030.395844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35243.431793, 32528.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34292.080000, 32153.222000, 1638.576047, 1638.576047, 0.000000, X, Y) && !ellipse(35782.403200, 31166.072000, 1685.712049, 1685.712049, 0.000000, X, Y) && !ellipse(34591.069855, 29876.884796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34533.166000, 25687.886000, 1635.152047, 981.312028, 90.000000, X, Y) [Tue Nov 29 05:37:21 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30.gif [Tue Nov 29 05:57:03 2011] Mean detx,y = (3966.50, 7107.05) [Tue Nov 29 05:57:04 2011] Setting backscal keywords in source and bgd. spectrum [Tue Nov 29 05:57:50 2011] Binned source spectrum to 10 counts/bin [Tue Nov 29 05:57:51 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Tue Nov 29 05:57:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30_bgd.pi.gz [Tue Nov 29 15:08:56 2011] Updating aperture counts using extracted products [Tue Nov 29 15:08:56 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Tue Nov 29 15:09:00 2011] Calculating source flux in energy range 0.30-8.00 [Tue Nov 29 15:09:00 2011] Using photon index=1.80, rate=0.06, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src30.arf [Tue Nov 29 15:09:00 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Nov 29 15:09:00 2011] Updating source flux to 9e-13 [Tue Nov 29 15:09:14 2011] Flag b found in src. 30 procflags, skipping spectral fitting [Tue Nov 29 15:09:14 2011] Flag c found in src. 30 procflags, skipping spectral fitting