[Sat Nov 26 22:28:08 2011] Detection parameters:
  Position = (393.5, 338.9) = 5 34 6.80 22 2 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.5 +/- 32.6
  Background counts = 178.5
  Rate = 0.06 +/- 0.008

[Sat Nov 26 22:28:13 2011] Off-axis axis estimate = 7.49'
[Sat Nov 26 22:32:53 2011] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 22:32:53 2011] Initial guess for spatial extent in simple fitting = 10.17"
[Sat Nov 26 22:32:53 2011] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.620
[Sat Nov 26 22:32:53 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 10.17"
[Sun Nov 27 09:34:28 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15.ximg exists
[Sun Nov 27 09:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15.csv
[Sun Nov 27 09:34:28 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Nov 27 09:34:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15.csv
[Sun Nov 27 09:34:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Nov 27 09:34:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Nov 27 09:34:33 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Nov 27 09:34:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Nov 27 09:34:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 22:38:19 2011] Warning, spatial fit 15 centroid is now closest to src. 18
[Sun Nov 27 22:38:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 22:38:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 22:38:19 2011] Assessing source extent using major
[Sun Nov 27 22:38:19 2011] Source does appear to be extended
[Sun Nov 27 22:38:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 22:38:19 2011] Source is confused with source 18
[Sun Nov 27 22:38:19 2011] Source is confused with source 73
[Sun Nov 27 22:39:25 2011] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:39:25 2011] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Nov 27 22:39:25 2011] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.620
[Sun Nov 27 22:39:25 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 10.17"
[Mon Nov 28 13:20:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src13.ximg exists
[Mon Nov 28 13:20:35 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Nov 28 13:20:35 2011] Fit fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_src13 appears to have run properly
[Mon Nov 28 13:20:37 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Nov 28 13:20:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Nov 28 13:20:37 2011] fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Nov 28 13:20:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Nov 28 13:20:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412590601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 05:36:19 2011] Warning, spatial fit 13 centroid is now closest to src. 73
[Tue Nov 29 05:36:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 05:36:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 05:36:19 2011] Assessing source extent using major
[Tue Nov 29 05:36:19 2011] Source does appear to be extended
[Tue Nov 29 05:36:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 05:37:20 2011] XMMSAS src. selection expression = ellipse(34186.000000, 29435.119781, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov 29 05:37:20 2011] Writing source region out to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17_src.reg
[Tue Nov 29 05:37:20 2011] Extracting stamp from image fullrun_mos1_xmm0412590601_pi300-10000_cl_sm2.00.img.gz, (356, 301) - (431, 376)
[Tue Nov 29 05:37:20 2011] XMMSAS bgd. selection expression = annulus(34186.000000, 29435.119781, 1087.500000, 2175.000000, X, Y) && !ellipse(35403.997345, 29345.130219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35317.007965, 31997.812469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34552.868000, 26838.542000, 748.134422, 748.134422, 0.000000, X, Y) && !ellipse(35195.837738, 31202.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.343903, 28929.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35220.484375, 28465.325195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35106.527863, 26580.965942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34392.588000, 26107.306000, 1624.872047, 1624.872047, 0.000000, X, Y) && !ellipse(34223.474000, 31830.211000, 1752.056050, 1752.056050, 0.000000, X, Y) && !ellipse(34351.070000, 30971.384000, 1721.568050, 1721.568050, 0.000000, X, Y) && !ellipse(34249.991516, 28055.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.688721, 27578.293182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34449.468000, 33375.610000, 1847.120053, 1847.120053, 19.616700, X, Y) && !ellipse(34292.080000, 32153.222000, 1638.576047, 1638.576047, 0.000000, X, Y) && !ellipse(35782.403200, 31166.072000, 1685.712049, 1685.712049, 0.000000, X, Y) && !ellipse(34591.069855, 29876.884796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34533.166000, 25687.886000, 1635.152047, 981.312028, 90.000000, X, Y)
[Tue Nov 29 05:37:20 2011] Writing fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17.gif
[Tue Nov 29 05:49:06 2011] Mean detx,y = (2482.28, 6861.07) 
[Tue Nov 29 05:49:08 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov 29 05:49:30 2011] Binned source spectrum to 10 counts/bin
[Tue Nov 29 05:49:30 2011] Setting source spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Nov 29 05:49:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Nov 29 07:25:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Nov 29 07:25:03 2011] rmf not generated due to insufficient counts
[Tue Nov 29 15:08:55 2011] Updating aperture counts using extracted products
[Tue Nov 29 15:08:55 2011] Error reading totcts from fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Nov 29 15:08:59 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 15:08:59 2011] Using photon index=1.80, rate=0.0619, arf fullrun_mos1_xmm0412590601_pi300-10000_pass1_cl_src17.arf
[Tue Nov 29 15:08:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov 29 15:08:59 2011] Updating source flux to 9.9e-13
[Tue Nov 29 15:09:14 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting