[Sat Nov 26 22:41:09 2011] Detection parameters:
  Position = (391.5, 111.0) = 5 27 54.90 -65 40 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.1 +/- 5.7
  Background counts = 4.1
  Rate = 0.002 +/- 0.0006

[Sat Nov 26 22:41:09 2011] Off-axis axis estimate = 15.17'
[Sat Nov 26 23:09:16 2011] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 23:09:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 23:09:16 2011] Initial guess for spatial extent in simple fitting = 14.02"
[Sat Nov 26 23:09:16 2011] source mask rpix=3.2, npix_max = 55, mask sum = 39, frac = 0.704
[Sat Nov 26 23:09:16 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 14.02"
[Sat Nov 26 23:32:41 2011] fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9.ximg exists
[Sat Nov 26 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 23:32:41 2011] fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Nov 26 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 23:32:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 23:32:41 2011] fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Nov 26 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Nov 26 23:32:41 2011] fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Nov 26 23:32:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Nov 26 23:32:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412580401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 23:32:45 2011] Warning, spatial fit 4 centroid is now closest to src. 3
[Sat Nov 26 23:32:45 2011] Warning, spatial fit 5 centroid is now closest to src. 2
[Sat Nov 26 23:32:48 2011] Spatial fit model total counts = 36.552900, observed total counts = 49.000000
[Sat Nov 26 23:32:48 2011] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Nov 26 23:32:48 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 23:32:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 23:32:48 2011] Assessing source extent using major
[Sat Nov 26 23:32:48 2011] Source does appear to be extended
[Sat Nov 26 23:32:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 23:32:48 2011] Deleting source due to low Poisson probability 0.7