[Mon Aug  6 19:52:53 2012] Detection parameters:
  Position = (236.2, 295.6) = 0 25 48.02 64 8 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17156.7 +/- 159.8
  Background counts = 231.9
  Rate = 0.7 +/- 0.006

[Mon Aug  6 19:52:55 2012] Off-axis axis estimate = 4.52'
[Mon Aug  6 20:09:41 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 20:09:41 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Aug  6 20:09:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Mon Aug  6 20:09:41 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.69"
[Thu Aug  9 08:23:52 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37.ximg exists
[Thu Aug  9 08:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37.csv
[Thu Aug  9 08:23:52 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Aug  9 08:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37.csv
[Thu Aug  9 08:23:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 08:23:53 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Aug  9 08:23:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Aug  9 08:23:53 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Aug  9 08:23:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Aug  9 08:23:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:23 2012] Spatial fit model total counts = 102252.000000, observed total counts = 91652.000000
[Sun Aug 12 18:07:23 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 18:07:23 2012] Spatial fit model total counts = 112769.000000, observed total counts = 114133.000000
[Sun Aug 12 18:07:23 2012] Offset between fit and detection position for source 38 = 5.029899 pixels
[Sun Aug 12 18:07:23 2012] Warning, changing simple spatial fit ID from 37 to 43
[Sun Aug 12 18:07:23 2012] 96761.100000 total counts/ 25600.000000 bgd. counts: snr = 444.756875
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 5.029899 pixels
  Position = (233.3, 291.5) = 0 25 49.93 64 8 17.1
  Extent = 17.9 (17.9-35.9)", rotation angle = 0
  Source counts = 71161.1 +/- 311.1
  Background counts = 25600.0
  Rate = 2 +/- 0.01
[Sun Aug 12 18:07:23 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:23 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:07:23 2012] Source does appear to be extended
[Sun Aug 12 18:07:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:07:23 2012] Source is confused with source 44
[Sun Aug 12 18:08:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 18:08:17 2012] Initial guess for spatial extent in simple fitting = 17.94"
[Sun Aug 12 18:08:17 2012] source mask rpix=4.1, npix_max = 85, mask sum = 71, frac = 0.830
[Sun Aug 12 18:08:17 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 17.94"
[Mon Aug 20 13:04:23 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23.ximg exists
[Mon Aug 20 13:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23.csv
[Mon Aug 20 13:04:23 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Aug 20 13:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23.csv
[Mon Aug 20 13:04:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 13:04:25 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Aug 20 13:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Aug 20 13:04:25 2012] fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Aug 20 13:04:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Aug 20 13:04:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:08:28 2012] Warning, spatial fit 23 centroid is now closest to src. 8
[Sat Aug 25 10:08:28 2012] Spatial fit model total counts = 123285.000000, observed total counts = 114133.000000
[Sat Aug 25 10:08:28 2012] Offset between fit and detection position for source 38 = 3.339345 pixels
[Sat Aug 25 10:08:28 2012] Warning, changing simple spatial fit ID from 23 to 28
[Sat Aug 25 10:08:28 2012] 73584.300000 total counts/ 25600.000000 bgd. counts: snr = 299.901875
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.339345 pixels
  Position = (231.3, 294.2) = 0 25 51.23 64 8 28.8
  Extent = 17.9 (17.9-35.9)", rotation angle = 0
  Source counts = 47984.3 +/- 271.3
  Background counts = 25600.0
  Rate = 1 +/- 0.008
[Sat Aug 25 10:08:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:08:28 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:08:28 2012] Source does appear to be extended
[Sat Aug 25 10:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:09:39 2012] Counts = 47984.300000, rescaling region sizes by 3.000000
[Sat Aug 25 10:09:39 2012] XMMSAS src. selection expression = ellipse(20077.682000, 25544.882000, 3229.344093, 3229.344093, 0.000000, X, Y)
[Sat Aug 25 10:09:39 2012] Writing source region out to fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38_src.reg
[Sat Aug 25 10:09:39 2012] Extracting stamp from image fullrun_pn_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (46, 109) - (417, 480)
[Sat Aug 25 10:09:39 2012] XMMSAS bgd. selection expression = annulus(20077.682000, 25544.882000, 16146.720465, 32293.440929, X, Y) && !ellipse(27870.899180, 27110.932200, 3551.856102, 3551.856102, 0.000000, X, Y) && !ellipse(26856.260400, 28020.516000, 3562.080102, 3562.080102, -0.000000, X, Y) && !ellipse(23928.172000, 28911.531400, 3560.448102, 3560.448102, 317.662000, X, Y) && !ellipse(25091.879640, 29210.276400, 3725.112107, 3725.112107, 0.000000, X, Y) && !ellipse(21907.254000, 28895.218600, 4108.560118, 4108.560118, 0.000000, X, Y) && !ellipse(28497.880000, 25729.770000, 3560.448102, 3560.448102, 0.000000, X, Y) && !ellipse(28161.930000, 25306.304000, 7052.784203, 7052.784203, 0.000000, X, Y) && !ellipse(19612.833200, 24227.890000, 3725.112107, 3725.112107, 0.000000, X, Y) && !ellipse(27384.758000, 22669.690000, 3783.168109, 3783.168109, 0.000000, X, Y) && !ellipse(25851.410000, 28680.475800, 7267.584209, 7267.584209, 0.000000, X, Y) && !ellipse(20469.388000, 30579.128000, 1559.048045, 1559.048045, 0.000000, X, Y) && !ellipse(20877.179779, 29821.264587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20417.514557, 29230.778107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22743.341461, 28045.790741, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22081.402000, 27102.983000, 3813.720110, 3813.720110, 0.000000, X, Y) && !ellipse(24933.006600, 26425.058000, 3320.784096, 3320.784096, 0.000000, X, Y) && !ellipse(26503.473400, 26685.304200, 3575.064103, 3575.064103, 68.905000, X, Y) && !ellipse(23744.907600, 27061.336000, 3575.064103, 3575.064103, 354.414000, X, Y) && !ellipse(25019.370193, 26246.859580, 7150.128206, 7150.128206, 46.357859, X, Y) && !ellipse(22825.434555, 26328.425200, 3999.552115, 3999.552115, 346.563000, X, Y) && !ellipse(21351.052063, 26122.604340, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21895.690200, 25336.328000, 3898.464112, 3898.464112, 0.000000, X, Y) && !ellipse(25783.262400, 25826.660000, 3757.296108, 3757.296108, 0.000000, X, Y) && !ellipse(25277.948000, 25443.256000, 8611.584248, 8611.584248, 0.000000, X, Y) && !ellipse(21174.724200, 24616.292000, 4071.912117, 4071.912117, 0.000000, X, Y) && !ellipse(19886.840576, 24982.465729, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27552.652000, 25107.452000, 4305.792124, 4305.792124, 352.159000, X, Y) && !ellipse(23703.190000, 25876.240000, 7956.096229, 7956.096229, 0.000000, X, Y) && !ellipse(22071.197400, 25173.109000, 3849.888111, 3849.888111, -0.000000, X, Y) && !ellipse(25855.059692, 24855.656219, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24516.771635, 24728.503427, 4773.024137, 4773.024137, 0.000000, X, Y) && !ellipse(21707.997200, 24369.798000, 3978.000114, 3978.000114, 0.000000, X, Y) && !ellipse(23181.474396, 24377.604919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28504.882477, 24112.792297, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21572.494000, 24532.390000, 4080.504117, 4080.504117, 0.000000, X, Y) && !ellipse(20191.339415, 26634.555339, 3376.296060, 2661.812955, 93.983149, X, Y) && !ellipse(27556.543200, 24642.908800, 3526.392101, 3526.392101, 320.084000, X, Y) && !ellipse(24678.390533, 24161.185516, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27981.260180, 23784.576000, 3732.360107, 3732.360107, 0.000000, X, Y) && !ellipse(26219.653625, 23947.214050, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23235.897400, 24025.740000, 3789.888109, 3789.888109, 0.000000, X, Y) && !ellipse(22528.508331, 23791.175800, 4773.024137, 4773.024137, 0.000000, X, Y) && !ellipse(26670.490000, 23463.396000, 3320.784096, 3320.784096, 357.481000, X, Y) && !ellipse(23143.562000, 22839.348200, 3984.480115, 3984.480115, 0.000000, X, Y) && !ellipse(22778.308000, 22757.747400, 4046.304116, 4046.304116, 0.000000, X, Y) && !ellipse(23173.155000, 22330.350000, 3911.712113, 3911.712113, 0.000000, X, Y) && !ellipse(22012.598000, 21604.808000, 4192.416121, 4192.416121, 0.000000, X, Y) && !ellipse(25548.024139, 22103.018753, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19590.959600, 23381.044600, 4442.112128, 4442.112128, 0.000000, X, Y) && !ellipse(20452.672455, 22031.425888, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26573.906219, 21313.243118, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28273.602875, 20278.556961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22675.214000, 21691.270000, 4905.408141, 4905.408141, 359.652000, X, Y) && !ellipse(24402.044000, 21055.384000, 4905.408141, 4905.408141, 359.529000, X, Y)
[Sat Aug 25 10:09:39 2012] Writing fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38.gif
[Sat Aug 25 13:28:18 2012] Mean detx,y = (2244.72, -2310.93) 
[Sat Aug 25 13:28:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 13:35:59 2012] grppha failed
[Sat Aug 25 13:36:00 2012] Setting source spectrum file to fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38_src.pi.gz
[Sat Aug 25 13:36:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Aug 26 06:09:26 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:26 2012] Error reading totcts from fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38_src.pi.gz
[Sun Aug 26 06:09:31 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:58 2012] Flag p found in src. 38 procflags, skipping spectral fitting
[Sun Aug 26 06:09:58 2012] Flag c found in src. 38 procflags, skipping spectral fitting
[Sun Aug 26 06:09:58 2012] Source 38 has no response, skipping
[Sun Aug 26 06:09:59 2012] xmm0412380401/analysis//spectral/fullrun_pn_xmm0412380401_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete