[Mon Aug  6 19:54:39 2012] Detection parameters:
  Position = (300.0, 358.9) = 0 25 5.59 64 13 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.7 +/- 28.1
  Background counts = 114.4
  Rate = 0.01 +/- 0.001

[Mon Aug  6 19:54:40 2012] Off-axis axis estimate = 4.39'
[Sat Aug 11 03:22:02 2012] Using EEF radius (= 8.62 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:22:02 2012] Initial guess for spatial extent in simple fitting = 8.62"
[Sat Aug 11 03:22:02 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.015
[Sat Aug 11 03:22:02 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.62"
[Sun Aug 12 18:07:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61.ximg exists
[Sun Aug 12 18:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61.csv
[Sun Aug 12 18:07:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Aug 12 18:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61.csv
[Sun Aug 12 18:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Aug 12 18:07:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Aug 12 18:07:03 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Aug 12 18:07:59 2012] Spatial fit model total counts = 3534.030000, observed total counts = 3533.000000
[Sun Aug 12 18:07:59 2012] Offset between fit and detection position for source 71 = 9.264542 pixels
[Sun Aug 12 18:07:59 2012] 3418.135000 total counts/ 3058.110000 bgd. counts: snr = 6.510377
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 9.264542 pixels
  Position = (295.0, 351.1) = 0 25 8.89 64 12 36.8
  Extent = 17.2 (17.2-34.5)", rotation angle = 0
  Source counts = 360.0 +/- 58.5
  Background counts = 3058.1
  Rate = 0.01 +/- 0.002
[Sun Aug 12 18:07:59 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:59 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:07:59 2012] Source does appear to be extended
[Sun Aug 12 18:07:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 12:10:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:10:22 2012] Initial guess for spatial extent in simple fitting = 17.24"
[Thu Aug 23 12:10:22 2012] source mask rpix=4.0, npix_max = 79, mask sum = 72, frac = 0.903
[Thu Aug 23 12:10:22 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 17.24"
[Sat Aug 25 10:08:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60.ximg exists
[Sat Aug 25 10:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60.csv
[Sat Aug 25 10:08:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Aug 25 10:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60.csv
[Sat Aug 25 10:08:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:08:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Aug 25 10:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Aug 25 10:08:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Aug 25 10:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Aug 25 10:08:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:09:10 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 16.197852 pixels away
[Sat Aug 25 10:09:11 2012] Spatial fit model total counts = 14593.000000, observed total counts = 37746.000000
[Sat Aug 25 10:09:11 2012] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 10:09:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:09:11 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:09:11 2012] Source does appear to be extended
[Sat Aug 25 10:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:39:04 2012] XMMSAS src. selection expression = ellipse(25618.364000, 30494.780000, 1034.580030, 1034.580030, 0.000000, X, Y)
[Sun Aug 26 00:39:04 2012] Writing source region out to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71_src.reg
[Sun Aug 26 00:39:04 2012] Extracting stamp from image fullrun_mos2_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (236, 292) - (354, 411)
[Sun Aug 26 00:39:04 2012] XMMSAS bgd. selection expression = annulus(25618.364000, 30494.780000, 1724.300050, 3448.600099, X, Y) && !ellipse(26291.540000, 28632.642000, 7103.424204, 7103.424204, 0.000000, X, Y) && !ellipse(27689.497000, 27031.338000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(22271.346800, 29730.686000, 7811.520225, 7811.520225, 354.186000, X, Y) && !ellipse(25694.436600, 29105.098000, 3551.712102, 3551.712102, -0.000000, X, Y) && !ellipse(25484.022000, 28759.790000, 3721.296107, 3721.296107, 0.000000, X, Y) && !ellipse(23431.296000, 29504.925600, 7965.168229, 7965.168229, 0.000000, X, Y) && !ellipse(28421.530000, 26036.660000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(28387.569800, 25559.233800, 7121.568205, 7121.568205, 0.000000, X, Y) && !ellipse(22301.959600, 28393.130000, 7640.304220, 7640.304220, 0.000000, X, Y) && !ellipse(27584.626400, 23188.098000, 7082.496204, 7082.496204, 0.000000, X, Y) && !ellipse(29182.406000, 25092.412000, 7456.848215, 7456.848215, 0.000000, X, Y) && !ellipse(28342.074000, 26563.318000, 7199.520207, 7199.520207, 0.000000, X, Y) && !ellipse(20843.922000, 26875.986000, 7713.552222, 6010.728173, 36.786000, X, Y) && !ellipse(23709.501700, 20973.046000, 8301.576239, 8301.576239, 0.000000, X, Y) && !ellipse(23893.572000, 26857.596000, 6051.672174, 6051.672174, 0.000000, X, Y) && !ellipse(28427.090800, 24134.528000, 6320.640182, 6320.640182, 0.000000, X, Y) && !ellipse(25980.044000, 24088.768000, 7339.872211, 7339.872211, 0.000000, X, Y) && !ellipse(27780.233200, 24120.728000, 3541.248102, 3541.248102, 0.000000, X, Y) && !ellipse(26432.203263, 27047.668633, 8087.904233, 8084.500817, 232.488449, X, Y) && !ellipse(23090.742000, 28156.790000, 3779.784109, 3779.784109, 0.000000, X, Y) && !ellipse(19883.360000, 24076.014000, 8281.968238, 8281.968238, 0.000000, X, Y) && !ellipse(22259.972600, 22043.174800, 8377.920241, 8377.920241, 0.000000, X, Y) && !ellipse(26128.301400, 25951.220000, 3211.680092, 3211.680092, 0.000000, X, Y) && !ellipse(22571.246252, 26625.698000, 4190.160121, 4190.160121, 16.613900, X, Y) && !ellipse(21081.132360, 27327.928000, 4071.672117, 4071.672117, 0.000000, X, Y) && !ellipse(22170.578000, 27711.226000, 3820.152110, 3820.152110, 0.000000, X, Y) && !ellipse(20289.008000, 28038.416640, 7040.016203, 7040.016203, 0.000000, X, Y) && !ellipse(25646.536000, 26552.330000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(22785.932000, 23106.494000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(26857.672000, 22327.306000, 7688.976221, 7688.976221, 0.000000, X, Y) && !ellipse(26315.854000, 23622.950000, 5133.048148, 5133.048148, 0.000000, X, Y) && !ellipse(21593.218000, 26138.881200, 3856.776111, 3856.776111, 0.000000, X, Y) && !ellipse(23072.888000, 23764.764000, 8087.904233, 8087.904233, 0.000000, X, Y) && !ellipse(27201.608000, 25496.432000, 3353.304096, 3353.304096, 0.000000, X, Y) && !ellipse(24687.556000, 27180.806000, 1106.368032, 1106.368032, 0.000000, X, Y) && !ellipse(19591.998000, 27314.846200, 3944.808114, 3926.256113, 147.906000, X, Y) && !ellipse(23819.465000, 23013.738000, 7661.088220, 7661.088220, 0.000000, X, Y) && !ellipse(21347.664000, 28903.061000, 4140.984119, 4140.984119, 0.000000, X, Y) && !ellipse(22073.007629, 26229.979034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.110000, 24313.768000, 7983.504230, 7983.504230, 0.000000, X, Y) && !ellipse(27212.777954, 29419.741852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29568.880000, 29247.686000, 1309.504038, 1309.504038, 0.000000, X, Y)
[Sun Aug 26 00:39:04 2012] Writing fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71.gif
[Sun Aug 26 06:04:37 2012] Mean detx,y = (-1984.93, -4231.78) 
[Sun Aug 26 06:04:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 06:05:20 2012] grppha failed
[Sun Aug 26 06:05:21 2012] Setting source spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71_src.pi.gz
[Sun Aug 26 06:05:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sun Aug 26 06:09:53 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:53 2012] Error reading totcts from fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71_src.pi.gz
[Sun Aug 26 06:09:53 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:56 2012] Flag p found in src. 71 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Source 71 has no response, skipping
[Sun Aug 26 06:09:57 2012] xmm0412380401/analysis//spectral/fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete