[Mon Aug  6 19:54:38 2012] Detection parameters:
  Position = (282.0, 244.0) = 0 25 17.51 64 4 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14291.6 +/- 147.2
  Background counts = 275.2
  Rate = 0.5 +/- 0.005

[Mon Aug  6 19:54:40 2012] Off-axis axis estimate = 4.12'
[Sat Aug 11 03:22:01 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:22:01 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Aug 11 03:22:01 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.666
[Sat Aug 11 03:22:01 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.49"
[Sun Aug 12 18:07:00 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11.ximg exists
[Sun Aug 12 18:07:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11.csv
[Sun Aug 12 18:07:00 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Aug 12 18:07:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11.csv
[Sun Aug 12 18:07:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Aug 12 18:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Aug 12 18:07:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Aug 12 18:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Aug 12 18:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:59 2012] Warning, spatial fit 11 centroid is now closest to src. 52
[Sun Aug 12 18:07:59 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:59 2012] Assessing source extent using major
[Sun Aug 12 18:07:59 2012] Source does appear to be extended
[Sun Aug 12 18:07:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:07:59 2012] Source is confused with source 16
[Thu Aug 23 12:10:22 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:10:22 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Thu Aug 23 12:10:22 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.666
[Thu Aug 23 12:10:22 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.49"
[Sat Aug 25 10:07:59 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src11.ximg exists
[Sat Aug 25 10:07:59 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Aug 25 10:07:59 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src11 appears to have run properly
[Sat Aug 25 10:08:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Aug 25 10:08:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Aug 25 10:08:02 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Aug 25 10:09:10 2012] Spatial fit model total counts = 60981.900000, observed total counts = 59664.000000
[Sat Aug 25 10:09:10 2012] Offset between fit and detection position for source 55 = 1.068413 pixels
[Sat Aug 25 10:09:10 2012] 49485.500000 total counts/ 25600.000000 bgd. counts: snr = 149.284375
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 1.068413 pixels
  Position = (282.9, 243.4) = 0 25 16.94 64 4 48.4
  Extent = 17.0 (16.9-34.0)", rotation angle = 0
  Source counts = 23885.5 +/- 222.5
  Background counts = 25600.0
  Rate = 0.7 +/- 0.007
[Sat Aug 25 10:09:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:09:11 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:09:11 2012] Source does appear to be extended
[Sat Aug 25 10:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:38:56 2012] Counts = 23885.500000, rescaling region sizes by 3.000000
[Sun Aug 26 00:38:56 2012] XMMSAS src. selection expression = ellipse(24561.194600, 21128.179600, 3055.842088, 3055.842088, 0.000000, X, Y)
[Sun Aug 26 00:38:56 2012] Writing source region out to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55_src.reg
[Sun Aug 26 00:38:56 2012] Extracting stamp from image fullrun_mos2_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (107, 68) - (458, 419)
[Sun Aug 26 00:38:56 2012] XMMSAS bgd. selection expression = annulus(24561.194600, 21128.179600, 15279.210440, 30558.420879, X, Y) && !ellipse(26291.540000, 28632.642000, 7103.424204, 7103.424204, 0.000000, X, Y) && !ellipse(27689.497000, 27031.338000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(22271.346800, 29730.686000, 7811.520225, 7811.520225, 354.186000, X, Y) && !ellipse(25694.436600, 29105.098000, 3551.712102, 3551.712102, -0.000000, X, Y) && !ellipse(25484.022000, 28759.790000, 3721.296107, 3721.296107, 0.000000, X, Y) && !ellipse(23431.296000, 29504.925600, 7965.168229, 7965.168229, 0.000000, X, Y) && !ellipse(28421.530000, 26036.660000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(28387.569800, 25559.233800, 7121.568205, 7121.568205, 0.000000, X, Y) && !ellipse(22301.959600, 28393.130000, 7640.304220, 7640.304220, 0.000000, X, Y) && !ellipse(27584.626400, 23188.098000, 7082.496204, 7082.496204, 0.000000, X, Y) && !ellipse(29182.406000, 25092.412000, 7456.848215, 7456.848215, 0.000000, X, Y) && !ellipse(28342.074000, 26563.318000, 7199.520207, 7199.520207, 0.000000, X, Y) && !ellipse(20843.922000, 26875.986000, 7713.552222, 6010.728173, 36.786000, X, Y) && !ellipse(26660.672600, 21616.227400, 3960.624114, 3960.624114, 0.000000, X, Y) && !ellipse(19180.852000, 24409.836000, 2240.424064, 2240.424064, 0.000000, X, Y) && !ellipse(19582.794000, 23468.940400, 3462.912100, 3462.912100, 0.000000, X, Y) && !ellipse(23709.501700, 20973.046000, 8301.576239, 8301.576239, 0.000000, X, Y) && !ellipse(23893.572000, 26857.596000, 6051.672174, 6051.672174, 0.000000, X, Y) && !ellipse(28427.090800, 24134.528000, 6320.640182, 6320.640182, 0.000000, X, Y) && !ellipse(25980.044000, 24088.768000, 7339.872211, 7339.872211, 0.000000, X, Y) && !ellipse(27780.233200, 24120.728000, 3541.248102, 3541.248102, 0.000000, X, Y) && !ellipse(23906.746000, 22447.004000, 1276.848037, 1276.848037, 0.000000, X, Y) && !ellipse(26432.203263, 27047.668633, 8087.904233, 8084.500817, 232.488449, X, Y) && !ellipse(23090.742000, 28156.790000, 3779.784109, 3779.784109, 0.000000, X, Y) && !ellipse(19883.360000, 24076.014000, 8281.968238, 8281.968238, 0.000000, X, Y) && !ellipse(19495.482000, 25427.300000, 1120.216032, 1120.216032, 0.000000, X, Y) && !ellipse(22259.972600, 22043.174800, 8377.920241, 8377.920241, 0.000000, X, Y) && !ellipse(26128.301400, 25951.220000, 3211.680092, 3211.680092, 0.000000, X, Y) && !ellipse(24852.954000, 21242.478000, 4080.360117, 4080.360117, 0.000000, X, Y) && !ellipse(22571.246252, 26625.698000, 4190.160121, 4190.160121, 16.613900, X, Y) && !ellipse(21081.132360, 27327.928000, 4071.672117, 4071.672117, 0.000000, X, Y) && !ellipse(23392.434400, 21492.633000, 4116.720118, 4116.720118, 0.000000, X, Y) && !ellipse(23319.487200, 24617.990400, 1229.384035, 1229.384035, 0.000000, X, Y) && !ellipse(22170.578000, 27711.226000, 3820.152110, 3820.152110, 0.000000, X, Y) && !ellipse(20289.008000, 28038.416640, 7040.016203, 7040.016203, 0.000000, X, Y) && !ellipse(25646.536000, 26552.330000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(22785.932000, 23106.494000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(26857.672000, 22327.306000, 7688.976221, 7688.976221, 0.000000, X, Y) && !ellipse(26392.056800, 23271.209400, 3670.200106, 3670.200106, 0.000000, X, Y) && !ellipse(26315.854000, 23622.950000, 5133.048148, 5133.048148, 0.000000, X, Y) && !ellipse(21593.218000, 26138.881200, 3856.776111, 3856.776111, 0.000000, X, Y) && !ellipse(23669.848600, 25239.587200, 1191.464034, 1191.464034, 0.000000, X, Y) && !ellipse(23072.888000, 23764.764000, 8087.904233, 8087.904233, 0.000000, X, Y) && !ellipse(27201.608000, 25496.432000, 3353.304096, 3353.304096, 0.000000, X, Y) && !ellipse(25967.236000, 22557.308000, 3844.488111, 3844.488111, 0.000000, X, Y) && !ellipse(24687.556000, 27180.806000, 1106.368032, 1106.368032, 0.000000, X, Y) && !ellipse(19591.998000, 27314.846200, 3944.808114, 3926.256113, 147.906000, X, Y) && !ellipse(24407.788000, 23883.791552, 600.788312, 578.556104, 90.000000, X, Y) && !ellipse(23819.465000, 23013.738000, 7661.088220, 7661.088220, 0.000000, X, Y) && !ellipse(21347.664000, 28903.061000, 4140.984119, 4140.984119, 0.000000, X, Y) && !ellipse(22073.007629, 26229.979034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.110000, 24313.768000, 7983.504230, 7983.504230, 0.000000, X, Y) && !ellipse(21088.582000, 24919.318000, 1380.328040, 1380.328040, 0.000000, X, Y) && !ellipse(21298.631310, 23603.754000, 1415.496041, 1415.496041, 250.118545, X, Y) && !ellipse(25521.911926, 23551.951874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.267563, 21961.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21337.464000, 24112.224000, 1330.584038, 1330.584038, 0.000000, X, Y) && !ellipse(24935.344000, 23331.288000, 1188.312034, 1188.312034, 0.000000, X, Y) && !ellipse(27212.777954, 29419.741852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25618.364000, 30494.780000, 1379.440040, 1379.440040, 0.000000, X, Y) && !ellipse(29568.880000, 29247.686000, 1309.504038, 1309.504038, 0.000000, X, Y)
[Sun Aug 26 00:38:56 2012] Writing fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55.gif
[Sun Aug 26 01:39:07 2012] Mean detx,y = (2914.89, 2099.84) 
[Sun Aug 26 01:39:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 01:47:03 2012] grppha failed
[Sun Aug 26 01:47:04 2012] Setting source spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55_src.pi.gz
[Sun Aug 26 01:47:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun Aug 26 06:09:44 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:45 2012] Error reading totcts from fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55_src.pi.gz
[Sun Aug 26 06:09:53 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:56 2012] Flag c found in src. 55 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Source 55 has no response, skipping
[Sun Aug 26 06:09:57 2012] xmm0412380401/analysis//spectral/fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete