[Mon Aug  6 19:54:37 2012] Detection parameters:
  Position = (299.9, 283.0) = 0 25 5.60 64 7 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12293.2 +/- 139.8
  Background counts = 369.4
  Rate = 0.4 +/- 0.004

[Mon Aug  6 19:54:40 2012] Off-axis axis estimate = 1.12'
[Sat Aug 11 03:22:01 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:22:01 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Sat Aug 11 03:22:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Sat Aug 11 03:22:01 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 6.99"
[Sun Aug 12 18:07:00 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 12 18:07:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 18:07:00 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 12 18:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21.csv
[Sun Aug 12 18:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 12 18:07:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 12 18:07:02 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Aug 12 18:07:59 2012] Spatial fit model total counts = 45350.100000, observed total counts = 48878.000000
[Sun Aug 12 18:07:59 2012] Offset between fit and detection position for source 31 = 3.326655 pixels
[Sun Aug 12 18:07:59 2012] 45735.500000 total counts/ 25600.000000 bgd. counts: snr = 125.846875
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.326655 pixels
  Position = (300.0, 279.7) = 0 25 5.59 64 7 26.3
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 20135.5 +/- 213.9
  Background counts = 25600.0
  Rate = 0.6 +/- 0.006
[Sun Aug 12 18:07:59 2012] Spatial fit model total counts = 49018.800000, observed total counts = 48966.000000
[Sun Aug 12 18:07:59 2012] Offset between fit and detection position for source 31 = 2.052752 pixels
[Sun Aug 12 18:07:59 2012] Warning, changing simple spatial fit ID from 21 to 41
[Sun Aug 12 18:07:59 2012] 47122.700000 total counts/ 25600.000000 bgd. counts: snr = 134.516875
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.052752 pixels
  Position = (300.3, 277.7) = 0 25 5.39 64 7 17.5
  Extent = 14.6 (14.6-29.3)", rotation angle = 0
  Source counts = 21522.7 +/- 217.1
  Background counts = 25600.0
  Rate = 0.6 +/- 0.006
[Sun Aug 12 18:07:59 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:59 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:07:59 2012] Source does appear to be extended
[Sun Aug 12 18:07:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:07:59 2012] Source is confused with source 46
[Sun Aug 12 18:07:59 2012] Source is confused with source 41
[Sun Aug 12 18:07:59 2012] Source is confused with source 43
[Thu Aug 23 12:10:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:10:22 2012] Initial guess for spatial extent in simple fitting = 14.64"
[Thu Aug 23 12:10:22 2012] source mask rpix=3.4, npix_max = 59, mask sum = 51, frac = 0.854
[Thu Aug 23 12:10:22 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 14.64"
[Sat Aug 25 10:07:59 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21.ximg exists
[Sat Aug 25 10:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21.csv
[Sat Aug 25 10:07:59 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Aug 25 10:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21.csv
[Sat Aug 25 10:07:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:08:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Aug 25 10:08:02 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Aug 25 10:08:02 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Aug 25 10:09:11 2012] Warning, spatial fit 21 centroid is now closest to src. 41
[Sat Aug 25 10:09:11 2012] Spatial fit model total counts = 84766.900000, observed total counts = 84102.000000
[Sat Aug 25 10:09:11 2012] Offset between fit and detection position for source 31 = 1.125254 pixels
[Sat Aug 25 10:09:11 2012] Warning, changing simple spatial fit ID from 21 to 40
[Sat Aug 25 10:09:11 2012] 82504.300000 total counts/ 44100.000000 bgd. counts: snr = 182.877619
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.125254 pixels
  Position = (299.2, 277.4) = 0 25 6.12 64 7 16.5
  Extent = 30.6 (30.6-30.6)", rotation angle = 0
  Source counts = 38404.3 +/- 287.2
  Background counts = 44100.0
  Rate = 1 +/- 0.008
[Sat Aug 25 10:09:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:09:11 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:09:11 2012] Source does appear to be extended
[Sat Aug 25 10:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:38:58 2012] Counts = 38404.300000, rescaling region sizes by 3.000000
[Sun Aug 26 00:38:58 2012] XMMSAS src. selection expression = ellipse(25980.044000, 24088.768000, 5504.904158, 5504.904158, 0.000000, X, Y)
[Sun Aug 26 00:38:58 2012] Writing source region out to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31_src.reg
[Sun Aug 26 00:38:58 2012] Extracting stamp from image fullrun_mos2_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 594)
[Sun Aug 26 00:38:58 2012] XMMSAS bgd. selection expression = annulus(25980.044000, 24088.768000, 27524.520792, 55049.041584, X, Y) && !ellipse(26291.540000, 28632.642000, 7103.424204, 7103.424204, 0.000000, X, Y) && !ellipse(27689.497000, 27031.338000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(22271.346800, 29730.686000, 7811.520225, 7811.520225, 354.186000, X, Y) && !ellipse(25694.436600, 29105.098000, 3551.712102, 3551.712102, -0.000000, X, Y) && !ellipse(25484.022000, 28759.790000, 3721.296107, 3721.296107, 0.000000, X, Y) && !ellipse(23431.296000, 29504.925600, 7965.168229, 7965.168229, 0.000000, X, Y) && !ellipse(28421.530000, 26036.660000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(28387.569800, 25559.233800, 7121.568205, 7121.568205, 0.000000, X, Y) && !ellipse(22301.959600, 28393.130000, 7640.304220, 7640.304220, 0.000000, X, Y) && !ellipse(27584.626400, 23188.098000, 7082.496204, 7082.496204, 0.000000, X, Y) && !ellipse(24561.194600, 21128.179600, 4074.456117, 4074.456117, 0.000000, X, Y) && !ellipse(29182.406000, 25092.412000, 7456.848215, 7456.848215, 0.000000, X, Y) && !ellipse(28342.074000, 26563.318000, 7199.520207, 7199.520207, 0.000000, X, Y) && !ellipse(20843.922000, 26875.986000, 7713.552222, 6010.728173, 36.786000, X, Y) && !ellipse(26660.672600, 21616.227400, 3960.624114, 3960.624114, 0.000000, X, Y) && !ellipse(19180.852000, 24409.836000, 2240.424064, 2240.424064, 0.000000, X, Y) && !ellipse(19582.794000, 23468.940400, 3462.912100, 3462.912100, 0.000000, X, Y) && !ellipse(23709.501700, 20973.046000, 8301.576239, 8301.576239, 0.000000, X, Y) && !ellipse(23893.572000, 26857.596000, 6051.672174, 6051.672174, 0.000000, X, Y) && !ellipse(28427.090800, 24134.528000, 6320.640182, 6320.640182, 0.000000, X, Y) && !ellipse(27780.233200, 24120.728000, 3541.248102, 3541.248102, 0.000000, X, Y) && !ellipse(23906.746000, 22447.004000, 1276.848037, 1276.848037, 0.000000, X, Y) && !ellipse(26432.203263, 27047.668633, 8087.904233, 8084.500817, 232.488449, X, Y) && !ellipse(23090.742000, 28156.790000, 3779.784109, 3779.784109, 0.000000, X, Y) && !ellipse(19883.360000, 24076.014000, 8281.968238, 8281.968238, 0.000000, X, Y) && !ellipse(19495.482000, 25427.300000, 1120.216032, 1120.216032, 0.000000, X, Y) && !ellipse(22259.972600, 22043.174800, 8377.920241, 8377.920241, 0.000000, X, Y) && !ellipse(26128.301400, 25951.220000, 3211.680092, 3211.680092, 0.000000, X, Y) && !ellipse(24852.954000, 21242.478000, 4080.360117, 4080.360117, 0.000000, X, Y) && !ellipse(22571.246252, 26625.698000, 4190.160121, 4190.160121, 16.613900, X, Y) && !ellipse(21081.132360, 27327.928000, 4071.672117, 4071.672117, 0.000000, X, Y) && !ellipse(23392.434400, 21492.633000, 4116.720118, 4116.720118, 0.000000, X, Y) && !ellipse(23319.487200, 24617.990400, 1229.384035, 1229.384035, 0.000000, X, Y) && !ellipse(22170.578000, 27711.226000, 3820.152110, 3820.152110, 0.000000, X, Y) && !ellipse(20289.008000, 28038.416640, 7040.016203, 7040.016203, 0.000000, X, Y) && !ellipse(25646.536000, 26552.330000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(22785.932000, 23106.494000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(26857.672000, 22327.306000, 7688.976221, 7688.976221, 0.000000, X, Y) && !ellipse(26392.056800, 23271.209400, 3670.200106, 3670.200106, 0.000000, X, Y) && !ellipse(26315.854000, 23622.950000, 5133.048148, 5133.048148, 0.000000, X, Y) && !ellipse(21593.218000, 26138.881200, 3856.776111, 3856.776111, 0.000000, X, Y) && !ellipse(23669.848600, 25239.587200, 1191.464034, 1191.464034, 0.000000, X, Y) && !ellipse(23072.888000, 23764.764000, 8087.904233, 8087.904233, 0.000000, X, Y) && !ellipse(27201.608000, 25496.432000, 3353.304096, 3353.304096, 0.000000, X, Y) && !ellipse(25967.236000, 22557.308000, 3844.488111, 3844.488111, 0.000000, X, Y) && !ellipse(24687.556000, 27180.806000, 1106.368032, 1106.368032, 0.000000, X, Y) && !ellipse(19591.998000, 27314.846200, 3944.808114, 3926.256113, 147.906000, X, Y) && !ellipse(24407.788000, 23883.791552, 600.788312, 578.556104, 90.000000, X, Y) && !ellipse(23819.465000, 23013.738000, 7661.088220, 7661.088220, 0.000000, X, Y) && !ellipse(21347.664000, 28903.061000, 4140.984119, 4140.984119, 0.000000, X, Y) && !ellipse(22073.007629, 26229.979034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.110000, 24313.768000, 7983.504230, 7983.504230, 0.000000, X, Y) && !ellipse(21088.582000, 24919.318000, 1380.328040, 1380.328040, 0.000000, X, Y) && !ellipse(21298.631310, 23603.754000, 1415.496041, 1415.496041, 250.118545, X, Y) && !ellipse(25521.911926, 23551.951874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.267563, 21961.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21337.464000, 24112.224000, 1330.584038, 1330.584038, 0.000000, X, Y) && !ellipse(24935.344000, 23331.288000, 1188.312034, 1188.312034, 0.000000, X, Y) && !ellipse(27212.777954, 29419.741852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25618.364000, 30494.780000, 1379.440040, 1379.440040, 0.000000, X, Y) && !ellipse(29568.880000, 29247.686000, 1309.504038, 1309.504038, 0.000000, X, Y)
[Sun Aug 26 00:38:58 2012] Writing fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31.gif
[Sun Aug 26 02:36:45 2012] Mean detx,y = (1321.99, -904.40) 
[Sun Aug 26 02:36:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 02:38:39 2012] grppha failed
[Sun Aug 26 02:38:40 2012] Setting source spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31_src.pi.gz
[Sun Aug 26 02:38:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Aug 26 06:09:46 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:46 2012] Error reading totcts from fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31_src.pi.gz
[Sun Aug 26 06:09:53 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:56 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Source 31 has no response, skipping
[Sun Aug 26 06:09:57 2012] xmm0412380401/analysis//spectral/fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete