[Mon Aug  6 19:54:37 2012] Detection parameters:
  Position = (255.0, 288.3) = 0 25 35.51 64 8 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5006.1 +/- 92.9
  Background counts = 284.7
  Rate = 0.2 +/- 0.003

[Mon Aug  6 19:54:40 2012] Off-axis axis estimate = 3.24'
[Sat Aug 11 03:22:02 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:22:02 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Aug 11 03:22:02 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.905
[Sat Aug 11 03:22:02 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.05"
[Sun Aug 12 18:07:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53.ximg exists
[Sun Aug 12 18:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53.csv
[Sun Aug 12 18:07:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Aug 12 18:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53.csv
[Sun Aug 12 18:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Aug 12 18:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Aug 12 18:07:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Aug 12 18:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Aug 12 18:07:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:59 2012] Source 29 is offset by -7.981137 and -1.521986 pixels which is larger than
2 X fitted extent = 7.932920 x 7.932920, not incorporating fit results
[Sun Aug 12 18:07:59 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:59 2012] Assessing source extent using major
[Sun Aug 12 18:07:59 2012] Source does appear to be extended
[Sun Aug 12 18:07:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 12:10:22 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 12:10:22 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Thu Aug 23 12:10:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.905
[Thu Aug 23 12:10:22 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.05"
[Sat Aug 25 10:08:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src53.ximg exists
[Sat Aug 25 10:08:01 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat Aug 25 10:08:01 2012] Fit fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_src53 appears to have run properly
[Sat Aug 25 10:08:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat Aug 25 10:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Aug 25 10:08:03 2012] fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat Aug 25 10:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Aug 25 10:08:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 10:09:11 2012] Spatial fit model total counts = 43761.000000, observed total counts = 68761.000000
[Sat Aug 25 10:09:11 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 25 10:09:11 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.879042 pixels away
[Sat Aug 25 10:09:11 2012] Spatial fit model total counts = 31752.800000, observed total counts = 28929.000000
[Sat Aug 25 10:09:11 2012] Offset between fit and detection position for source 29 = 4.937014 pixels
[Sat Aug 25 10:09:11 2012] 29832.880000 total counts/ 25600.000000 bgd. counts: snr = 26.455500
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.937014 pixels
  Position = (256.9, 283.7) = 0 25 34.20 64 7 43.7
  Extent = 15.5" x 15.5", rotation angle = 0
  Source counts = 4232.9 +/- 172.7
  Background counts = 25600.0
  Rate = 0.1 +/- 0.005
[Sat Aug 25 10:09:11 2012] Spatial fit model total counts = 67410.100000, observed total counts = 61615.000000
[Sat Aug 25 10:09:11 2012] Offset between fit and detection position for source 29 = 3.726929 pixels
[Sat Aug 25 10:09:11 2012] Warning, changing simple spatial fit ID from 53 to 57
[Sat Aug 25 10:09:11 2012] 62874.900000 total counts/ 52092.000000 bgd. counts: snr = 47.244370
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.726929 pixels
  Position = (256.5, 280.0) = 0 25 34.48 64 7 27.5
  Extent = 33.3 (32.7-66.5)", rotation angle = 0
  Source counts = 10782.9 +/- 250.7
  Background counts = 52092.0
  Rate = 0.3 +/- 0.007
[Sat Aug 25 10:09:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:09:11 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:09:11 2012] Source does appear to be extended
[Sat Aug 25 10:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 10:09:11 2012] Source is confused with source 36
[Sat Aug 25 10:09:11 2012] Source is confused with source 50
[Sat Aug 25 10:09:11 2012] Source is confused with source 21
[Sat Aug 25 10:09:11 2012] Source is confused with source 25
[Sat Aug 25 10:09:11 2012] Source is confused with source 44
[Sat Aug 25 10:09:11 2012] Source is confused with source 17
[Sat Aug 25 10:09:11 2012] Source is confused with source 28
[Sat Aug 25 10:09:11 2012] Source is confused with source 37
[Sat Aug 25 10:09:11 2012] Source is confused with source 33
[Sun Aug 26 00:39:03 2012] Counts = 10782.900000, rescaling region sizes by 3.000000
[Sun Aug 26 00:39:03 2012] XMMSAS src. selection expression = ellipse(22267.110000, 24313.768000, 5987.628172, 5987.628172, 0.000000, X, Y)
[Sun Aug 26 00:39:03 2012] Writing source region out to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29_src.reg
[Sun Aug 26 00:39:03 2012] Extracting stamp from image fullrun_mos2_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 595)
[Sun Aug 26 00:39:03 2012] XMMSAS bgd. selection expression = annulus(22267.110000, 24313.768000, 29938.140861, 59876.281723, X, Y) && !ellipse(26291.540000, 28632.642000, 7103.424204, 7103.424204, 0.000000, X, Y) && !ellipse(27689.497000, 27031.338000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(22271.346800, 29730.686000, 7811.520225, 7811.520225, 354.186000, X, Y) && !ellipse(25694.436600, 29105.098000, 3551.712102, 3551.712102, -0.000000, X, Y) && !ellipse(25484.022000, 28759.790000, 3721.296107, 3721.296107, 0.000000, X, Y) && !ellipse(23431.296000, 29504.925600, 7965.168229, 7965.168229, 0.000000, X, Y) && !ellipse(28421.530000, 26036.660000, 3497.256101, 3497.256101, 0.000000, X, Y) && !ellipse(28387.569800, 25559.233800, 7121.568205, 7121.568205, 0.000000, X, Y) && !ellipse(22301.959600, 28393.130000, 7640.304220, 7640.304220, 0.000000, X, Y) && !ellipse(27584.626400, 23188.098000, 7082.496204, 7082.496204, 0.000000, X, Y) && !ellipse(24561.194600, 21128.179600, 4074.456117, 4074.456117, 0.000000, X, Y) && !ellipse(29182.406000, 25092.412000, 7456.848215, 7456.848215, 0.000000, X, Y) && !ellipse(28342.074000, 26563.318000, 7199.520207, 7199.520207, 0.000000, X, Y) && !ellipse(20843.922000, 26875.986000, 7713.552222, 6010.728173, 36.786000, X, Y) && !ellipse(26660.672600, 21616.227400, 3960.624114, 3960.624114, 0.000000, X, Y) && !ellipse(19180.852000, 24409.836000, 2240.424064, 2240.424064, 0.000000, X, Y) && !ellipse(19582.794000, 23468.940400, 3462.912100, 3462.912100, 0.000000, X, Y) && !ellipse(23709.501700, 20973.046000, 8301.576239, 8301.576239, 0.000000, X, Y) && !ellipse(23893.572000, 26857.596000, 6051.672174, 6051.672174, 0.000000, X, Y) && !ellipse(28427.090800, 24134.528000, 6320.640182, 6320.640182, 0.000000, X, Y) && !ellipse(25980.044000, 24088.768000, 7339.872211, 7339.872211, 0.000000, X, Y) && !ellipse(27780.233200, 24120.728000, 3541.248102, 3541.248102, 0.000000, X, Y) && !ellipse(23906.746000, 22447.004000, 1276.848037, 1276.848037, 0.000000, X, Y) && !ellipse(26432.203263, 27047.668633, 8087.904233, 8084.500817, 232.488449, X, Y) && !ellipse(23090.742000, 28156.790000, 3779.784109, 3779.784109, 0.000000, X, Y) && !ellipse(19883.360000, 24076.014000, 8281.968238, 8281.968238, 0.000000, X, Y) && !ellipse(19495.482000, 25427.300000, 1120.216032, 1120.216032, 0.000000, X, Y) && !ellipse(22259.972600, 22043.174800, 8377.920241, 8377.920241, 0.000000, X, Y) && !ellipse(26128.301400, 25951.220000, 3211.680092, 3211.680092, 0.000000, X, Y) && !ellipse(24852.954000, 21242.478000, 4080.360117, 4080.360117, 0.000000, X, Y) && !ellipse(22571.246252, 26625.698000, 4190.160121, 4190.160121, 16.613900, X, Y) && !ellipse(21081.132360, 27327.928000, 4071.672117, 4071.672117, 0.000000, X, Y) && !ellipse(23392.434400, 21492.633000, 4116.720118, 4116.720118, 0.000000, X, Y) && !ellipse(23319.487200, 24617.990400, 1229.384035, 1229.384035, 0.000000, X, Y) && !ellipse(22170.578000, 27711.226000, 3820.152110, 3820.152110, 0.000000, X, Y) && !ellipse(20289.008000, 28038.416640, 7040.016203, 7040.016203, 0.000000, X, Y) && !ellipse(25646.536000, 26552.330000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(22785.932000, 23106.494000, 4043.952116, 4043.952116, 0.000000, X, Y) && !ellipse(26857.672000, 22327.306000, 7688.976221, 7688.976221, 0.000000, X, Y) && !ellipse(26392.056800, 23271.209400, 3670.200106, 3670.200106, 0.000000, X, Y) && !ellipse(26315.854000, 23622.950000, 5133.048148, 5133.048148, 0.000000, X, Y) && !ellipse(21593.218000, 26138.881200, 3856.776111, 3856.776111, 0.000000, X, Y) && !ellipse(23669.848600, 25239.587200, 1191.464034, 1191.464034, 0.000000, X, Y) && !ellipse(23072.888000, 23764.764000, 8087.904233, 8087.904233, 0.000000, X, Y) && !ellipse(27201.608000, 25496.432000, 3353.304096, 3353.304096, 0.000000, X, Y) && !ellipse(25967.236000, 22557.308000, 3844.488111, 3844.488111, 0.000000, X, Y) && !ellipse(24687.556000, 27180.806000, 1106.368032, 1106.368032, 0.000000, X, Y) && !ellipse(19591.998000, 27314.846200, 3944.808114, 3926.256113, 147.906000, X, Y) && !ellipse(24407.788000, 23883.791552, 600.788312, 578.556104, 90.000000, X, Y) && !ellipse(23819.465000, 23013.738000, 7661.088220, 7661.088220, 0.000000, X, Y) && !ellipse(21347.664000, 28903.061000, 4140.984119, 4140.984119, 0.000000, X, Y) && !ellipse(22073.007629, 26229.979034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21088.582000, 24919.318000, 1380.328040, 1380.328040, 0.000000, X, Y) && !ellipse(21298.631310, 23603.754000, 1415.496041, 1415.496041, 250.118545, X, Y) && !ellipse(25521.911926, 23551.951874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.267563, 21961.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21337.464000, 24112.224000, 1330.584038, 1330.584038, 0.000000, X, Y) && !ellipse(24935.344000, 23331.288000, 1188.312034, 1188.312034, 0.000000, X, Y) && !ellipse(27212.777954, 29419.741852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25618.364000, 30494.780000, 1379.440040, 1379.440040, 0.000000, X, Y) && !ellipse(29568.880000, 29247.686000, 1309.504038, 1309.504038, 0.000000, X, Y)
[Sun Aug 26 00:39:03 2012] Writing fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29.gif
[Sun Aug 26 05:49:47 2012] Mean detx,y = (70.84, -10.40) 
[Sun Aug 26 05:49:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 05:51:42 2012] grppha failed
[Sun Aug 26 05:51:44 2012] Setting source spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29_src.pi.gz
[Sun Aug 26 05:51:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Aug 26 06:09:51 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:52 2012] Error reading totcts from fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29_src.pi.gz
[Sun Aug 26 06:09:53 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:56 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Flag p found in src. 29 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Flag c found in src. 29 procflags, skipping spectral fitting
[Sun Aug 26 06:09:56 2012] Source 29 has no response, skipping
[Sun Aug 26 06:09:57 2012] xmm0412380401/analysis//spectral/fullrun_mos2_xmm0412380401_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete