[Mon Aug  6 19:53:49 2012] Detection parameters:
  Position = (306.7, 228.2) = 0 25 1.15 64 3 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 20.0
  Background counts = 96.7
  Rate = 0.005 +/- 0.0008

[Mon Aug  6 19:53:49 2012] Off-axis axis estimate = 5.13'
[Thu Aug  9 08:23:55 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 08:23:55 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu Aug  9 08:23:55 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Thu Aug  9 08:23:55 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 8.99"
[Sat Aug 11 03:21:59 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77.ximg exists
[Sat Aug 11 03:21:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77.csv
[Sat Aug 11 03:21:59 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77_1.ximg exists
[Sat Aug 11 03:21:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77.csv
[Sat Aug 11 03:21:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 03:22:01 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sat Aug 11 03:22:01 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sat Aug 11 03:22:01 2012] Fit fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Sun Aug 12 18:07:42 2012] Spatial fit model total counts = 2828.460000, observed total counts = 2636.000000
[Sun Aug 12 18:07:42 2012] Offset between fit and detection position for source 87 = 8.402318 pixels
[Sun Aug 12 18:07:42 2012] 2866.056000 total counts/ 2049.430000 bgd. counts: snr = 18.038759
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 8.402318 pixels
  Position = (311.3, 221.2) = 0 24 58.10 64 3 11.8
  Extent = 18.0 (18.0-36.0)", rotation angle = 0
  Source counts = 816.6 +/- 53.5
  Background counts = 2049.4
  Rate = 0.02 +/- 0.002
[Sun Aug 12 18:07:42 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:42 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:07:42 2012] Source does appear to be extended
[Sun Aug 12 18:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 13:04:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 13:04:27 2012] Initial guess for spatial extent in simple fitting = 17.98"
[Mon Aug 20 13:04:27 2012] source mask rpix=4.1, npix_max = 85, mask sum = 17, frac = 0.198
[Mon Aug 20 13:04:27 2012] Skipping simple spatial due to low active detector fraction
[Sat Aug 25 10:08:54 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 10:08:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 10:08:54 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 10:08:54 2012] Source does appear to be extended
[Sat Aug 25 10:08:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 18:33:22 2012] XMMSAS src. selection expression = ellipse(27032.840000, 19194.842000, 1079.004031, 1079.004031, 0.000000, X, Y)
[Sat Aug 25 18:33:22 2012] Writing source region out to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87_src.reg
[Sat Aug 25 18:33:22 2012] Extracting stamp from image fullrun_mos1_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (249, 159) - (373, 283)
[Sat Aug 25 18:33:22 2012] XMMSAS bgd. selection expression = annulus(27032.840000, 19194.842000, 1798.340052, 3596.680103, X, Y) && !ellipse(26731.347200, 28189.250000, 6695.136193, 6695.136193, 0.000000, X, Y) && !ellipse(25488.124000, 28911.642000, 7132.584205, 7132.584205, 0.000000, X, Y) && !ellipse(23334.588000, 29421.378600, 6924.624199, 6924.624199, 0.000000, X, Y) && !ellipse(28282.684360, 25430.870000, 7210.656207, 7210.656207, 0.000000, X, Y) && !ellipse(23026.484000, 29218.513600, 7784.688224, 7784.688224, 0.000000, X, Y) && !ellipse(28187.288400, 25735.786000, 7027.872202, 7027.872202, 0.000000, X, Y) && !ellipse(24672.514800, 21186.061200, 5828.448168, 5828.448168, 0.000000, X, Y) && !ellipse(27592.094000, 23024.114000, 3728.208107, 3728.208107, 0.000000, X, Y) && !ellipse(28491.356720, 24525.242000, 7211.736208, 7211.736208, 0.000000, X, Y) && !ellipse(25262.524000, 29175.076000, 7109.760205, 7109.760205, 0.000000, X, Y) && !ellipse(28147.644000, 23693.122000, 7456.416215, 7456.416215, 0.000000, X, Y) && !ellipse(22106.772000, 28912.894000, 7784.688224, 5179.440149, 311.630700, X, Y) && !ellipse(26145.847891, 24171.513476, 6714.576193, 3227.527595, 79.303398, X, Y) && !ellipse(27951.924000, 26248.276000, 3554.880102, 3554.880102, 302.422000, X, Y) && !ellipse(25130.996000, 28048.928800, 5461.320157, 5461.320157, 0.000000, X, Y) && !ellipse(26730.058600, 21777.508000, 4459.632128, 4459.632128, 0.000000, X, Y) && !ellipse(19525.137208, 23444.597800, 4451.568128, 4451.568128, 0.000000, X, Y) && !ellipse(23556.351200, 26761.787800, 5025.864145, 5025.864145, 0.000000, X, Y) && !ellipse(19954.747200, 26219.003400, 3508.632101, 3508.632101, 0.000000, X, Y) && !ellipse(23924.404000, 21189.486000, 8292.720239, 8292.720239, 0.000000, X, Y) && !ellipse(27529.788000, 27056.766000, 7109.760205, 7109.760205, 0.000000, X, Y) && !ellipse(23971.992400, 22118.776800, 1319.360038, 874.552025, 33.068000, X, Y) && !ellipse(21202.188800, 27272.690000, 8160.384235, 8160.384235, 0.000000, X, Y) && !ellipse(22889.322000, 21664.784000, 4070.928117, 4070.928117, 0.000000, X, Y) && !ellipse(25999.938200, 24875.304000, 4619.664133, 4619.664133, 0.000000, X, Y) && !ellipse(27755.033000, 24428.847400, 3529.752102, 3529.752102, 0.000000, X, Y) && !ellipse(21156.850000, 28174.024000, 6714.576193, 5358.096154, 337.852000, X, Y) && !ellipse(22148.052400, 21682.005400, 1399.168040, 1399.168040, 0.000000, X, Y) && !ellipse(21945.780000, 25969.848000, 3967.248114, 3967.248114, 0.000000, X, Y) && !ellipse(26224.797400, 22334.325600, 3808.584110, 3808.584110, 0.000000, X, Y) && !ellipse(21316.210000, 26725.608000, 7934.496228, 7934.496228, 0.000000, X, Y) && !ellipse(22927.750000, 22279.932000, 8096.064233, 8096.064233, 0.000000, X, Y) && !ellipse(22489.100000, 26062.986000, 3653.568105, 3653.568105, 359.900000, X, Y) && !ellipse(26467.525400, 26215.666000, 6423.552185, 6423.552185, 0.000000, X, Y) && !ellipse(24970.472000, 26091.508000, 6091.272175, 6091.272175, 0.000000, X, Y) && !ellipse(25065.382000, 26023.182000, 3322.824096, 3322.824096, 0.000000, X, Y) && !ellipse(27456.272000, 25304.669400, 6113.040176, 6113.040176, 0.000000, X, Y) && !ellipse(23852.156000, 22649.638000, 1080.672031, 1080.672031, 0.000000, X, Y) && !ellipse(26221.266140, 23400.940000, 3653.568105, 3653.568105, 0.000000, X, Y) && !ellipse(25007.752000, 22037.154000, 3826.920110, 3826.920110, 0.000000, X, Y) && !ellipse(23486.524000, 22833.421800, 6480.288186, 4936.056142, 341.289000, X, Y) && !ellipse(22781.738000, 25780.100000, 5459.136157, 5459.136157, 0.000000, X, Y) && !ellipse(24494.732600, 23759.920000, 1198.032034, 1198.032034, 0.000000, X, Y) && !ellipse(22912.048000, 23835.490000, 7808.016225, 7808.016225, 0.000000, X, Y) && !ellipse(22032.986000, 23729.604000, 7958.160229, 7958.160229, 0.000000, X, Y) && !ellipse(23734.006000, 20858.928000, 758.208022, 758.208022, 0.000000, X, Y) && !ellipse(23531.610000, 24586.168000, 7653.840220, 7465.176215, 90.000000, X, Y) && !ellipse(24411.748596, 23196.310699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22585.308807, 20990.647766, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 18:33:22 2012] Writing fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87.gif
[Sun Aug 26 00:32:02 2012] Mean detx,y = (2678.15, -6561.13) 
[Sun Aug 26 00:32:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 00:32:53 2012] grppha failed
[Sun Aug 26 00:32:53 2012] Setting source spectrum file to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87_src.pi.gz
[Sun Aug 26 00:32:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Sun Aug 26 06:09:42 2012] Updating aperture counts using extracted products
[Sun Aug 26 06:09:43 2012] Error reading totcts from fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87_src.pi.gz
[Sun Aug 26 06:09:43 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 06:09:55 2012] Source 87 has no response, skipping
[Sun Aug 26 06:09:56 2012] xmm0412380401/analysis//spectral/fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete