[Mon Aug 6 19:53:47 2012] Detection parameters: Position = (257.8, 260.9) = 0 25 33.56 64 6 4.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 9344.3 +/- 119.6 Background counts = 89.6 Rate = 0.3 +/- 0.004 [Mon Aug 6 19:53:49 2012] Off-axis axis estimate = 4.01' [Thu Aug 9 08:23:55 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Thu Aug 9 08:23:55 2012] Initial guess for spatial extent in simple fitting = 8.43" [Thu Aug 9 08:23:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.051 [Thu Aug 9 08:23:55 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 8.43" [Sat Aug 11 03:21:58 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40.ximg exists [Sat Aug 11 03:21:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40.csv [Sat Aug 11 03:21:58 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40_1.ximg exists [Sat Aug 11 03:21:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40.csv [Sat Aug 11 03:21:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 11 03:22:00 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists [Sat Aug 11 03:22:00 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists [Sat Aug 11 03:22:00 2012] Fit fullrun_mos1_xmm0412380401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly [Sun Aug 12 18:07:42 2012] Spatial fit model total counts = 44275.400000, observed total counts = 42968.000000 [Sun Aug 12 18:07:42 2012] Offset between fit and detection position for source 54 = 3.551186 pixels [Sun Aug 12 18:07:42 2012] 40242.400000 total counts/ 25600.000000 bgd. counts: snr = 91.515000 Spatial fit parameters: Offset between fit and detection position for source 54 = 3.551186 pixels Position = (261.4, 260.7) = 0 25 31.21 64 6 3.6 Extent = 16.9 (16.8-33.7)", rotation angle = 0 Source counts = 14642.4 +/- 200.6 Background counts = 25600.0 Rate = 0.4 +/- 0.006 [Sun Aug 12 18:07:42 2012] Vigneting correction estimate = 1.000000 [Sun Aug 12 18:07:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 12 18:07:42 2012] Assessing source extent using major axis lower bound [Sun Aug 12 18:07:42 2012] Source does appear to be extended [Sun Aug 12 18:07:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 12 18:07:42 2012] Source is confused with source 59 [Mon Aug 20 13:04:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Aug 20 13:04:27 2012] Initial guess for spatial extent in simple fitting = 16.87" [Mon Aug 20 13:04:27 2012] source mask rpix=3.9, npix_max = 76, mask sum = 61, frac = 0.796 [Mon Aug 20 13:04:27 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 16.87" [Thu Aug 23 12:10:19 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_src40.ximg exists [Thu Aug 23 12:10:19 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_src40_1.ximg exists [Thu Aug 23 12:10:19 2012] Fit fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_src40 appears to have run properly [Thu Aug 23 12:10:21 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Thu Aug 23 12:10:21 2012] fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Thu Aug 23 12:10:21 2012] Fit fullrun_mos1_xmm0412380401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Sat Aug 25 10:08:54 2012] Spatial fit model total counts = 99770.100000, observed total counts = 95973.000000 [Sat Aug 25 10:08:54 2012] Offset between fit and detection position for source 54 = 4.887754 pixels [Sat Aug 25 10:08:54 2012] 94312.200000 total counts/ 57600.000000 bgd. counts: snr = 152.967500 Spatial fit parameters: Offset between fit and detection position for source 54 = 4.887754 pixels Position = (264.1, 256.6) = 0 25 29.41 64 5 45.9 Extent = 33.7 (33.6-67.5)", rotation angle = 0 Source counts = 36712.2 +/- 307.1 Background counts = 57600.0 Rate = 1 +/- 0.009 [Sat Aug 25 10:08:54 2012] Vigneting correction estimate = 1.000000 [Sat Aug 25 10:08:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 25 10:08:54 2012] Assessing source extent using major axis lower bound [Sat Aug 25 10:08:54 2012] Source does appear to be extended [Sat Aug 25 10:08:54 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 25 18:33:19 2012] Counts = 36712.200000, rescaling region sizes by 3.000000 [Sat Aug 25 18:33:19 2012] XMMSAS src. selection expression = ellipse(22927.750000, 22279.932000, 6072.048175, 6072.048175, 0.000000, X, Y) [Sat Aug 25 18:33:19 2012] Writing source region out to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54_src.reg [Sat Aug 25 18:33:19 2012] Extracting stamp from image fullrun_mos1_xmm0412380401_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 595) [Sat Aug 25 18:33:19 2012] XMMSAS bgd. selection expression = annulus(22927.750000, 22279.932000, 30360.240874, 60720.481747, X, Y) && !ellipse(26731.347200, 28189.250000, 6695.136193, 6695.136193, 0.000000, X, Y) && !ellipse(27811.758400, 27234.822200, 3551.928102, 3551.928102, 0.000000, X, Y) && !ellipse(25488.124000, 28911.642000, 7132.584205, 7132.584205, 0.000000, X, Y) && !ellipse(23334.588000, 29421.378600, 6924.624199, 6924.624199, 0.000000, X, Y) && !ellipse(25697.238000, 29241.064000, 5796.024167, 5796.024167, 0.000000, X, Y) && !ellipse(28282.684360, 25430.870000, 7210.656207, 7210.656207, 0.000000, X, Y) && !ellipse(23026.484000, 29218.513600, 7784.688224, 7784.688224, 0.000000, X, Y) && !ellipse(21930.936000, 28791.214200, 3554.880102, 3554.880102, 335.348500, X, Y) && !ellipse(28187.288400, 25735.786000, 7027.872202, 7027.872202, 0.000000, X, Y) && !ellipse(24672.514800, 21186.061200, 5828.448168, 5828.448168, 0.000000, X, Y) && !ellipse(27592.094000, 23024.114000, 3728.208107, 3728.208107, 0.000000, X, Y) && !ellipse(28491.356720, 24525.242000, 7211.736208, 7211.736208, 0.000000, X, Y) && !ellipse(25262.524000, 29175.076000, 7109.760205, 7109.760205, 0.000000, X, Y) && !ellipse(28147.644000, 23693.122000, 7456.416215, 7456.416215, 0.000000, X, Y) && !ellipse(22106.772000, 28912.894000, 7784.688224, 5179.440149, 311.630700, X, Y) && !ellipse(26145.847891, 24171.513476, 6714.576193, 3227.527595, 79.303398, X, Y) && !ellipse(27951.924000, 26248.276000, 3554.880102, 3554.880102, 302.422000, X, Y) && !ellipse(25130.996000, 28048.928800, 5461.320157, 5461.320157, 0.000000, X, Y) && !ellipse(26730.058600, 21777.508000, 4459.632128, 4459.632128, 0.000000, X, Y) && !ellipse(19525.137208, 23444.597800, 4451.568128, 4451.568128, 0.000000, X, Y) && !ellipse(23556.351200, 26761.787800, 5025.864145, 5025.864145, 0.000000, X, Y) && !ellipse(19954.747200, 26219.003400, 3508.632101, 3508.632101, 0.000000, X, Y) && !ellipse(23924.404000, 21189.486000, 8292.720239, 8292.720239, 0.000000, X, Y) && !ellipse(22589.185380, 27605.024000, 3856.680111, 3856.680111, 0.000000, X, Y) && !ellipse(27529.788000, 27056.766000, 7109.760205, 7109.760205, 0.000000, X, Y) && !ellipse(23971.992400, 22118.776800, 1319.360038, 874.552025, 33.068000, X, Y) && !ellipse(21202.188800, 27272.690000, 8160.384235, 8160.384235, 0.000000, X, Y) && !ellipse(23407.814800, 25149.924000, 1415.960041, 1120.312032, 90.000000, X, Y) && !ellipse(22889.322000, 21664.784000, 4070.928117, 4070.928117, 0.000000, X, Y) && !ellipse(19783.571884, 25086.654388, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25903.110000, 28106.802000, 3467.784100, 3467.784100, 0.000000, X, Y) && !ellipse(25999.938200, 24875.304000, 4619.664133, 4619.664133, 0.000000, X, Y) && !ellipse(27755.033000, 24428.847400, 3529.752102, 3529.752102, 0.000000, X, Y) && !ellipse(21156.850000, 28174.024000, 6714.576193, 5358.096154, 337.852000, X, Y) && !ellipse(22148.052400, 21682.005400, 1399.168040, 1399.168040, 0.000000, X, Y) && !ellipse(21945.780000, 25969.848000, 3967.248114, 3967.248114, 0.000000, X, Y) && !ellipse(23307.372200, 24539.193200, 1229.480035, 1229.480035, 0.000000, X, Y) && !ellipse(26224.797400, 22334.325600, 3808.584110, 3808.584110, 0.000000, X, Y) && !ellipse(21316.210000, 26725.608000, 7934.496228, 7934.496228, 0.000000, X, Y) && !ellipse(22489.100000, 26062.986000, 3653.568105, 3653.568105, 359.900000, X, Y) && !ellipse(20241.004900, 22262.156600, 966.768028, 966.768028, 0.000000, X, Y) && !ellipse(24933.275800, 26910.311600, 3369.888097, 3369.888097, 0.000000, X, Y) && !ellipse(26467.525400, 26215.666000, 6423.552185, 6423.552185, 0.000000, X, Y) && !ellipse(25593.878000, 25925.178000, 1067.776031, 1067.776031, 0.000000, X, Y) && !ellipse(24970.472000, 26091.508000, 6091.272175, 6091.272175, 0.000000, X, Y) && !ellipse(25065.382000, 26023.182000, 3322.824096, 3322.824096, 0.000000, X, Y) && !ellipse(27456.272000, 25304.669400, 6113.040176, 6113.040176, 0.000000, X, Y) && !ellipse(23852.156000, 22649.638000, 1080.672031, 1080.672031, 0.000000, X, Y) && !ellipse(26221.266140, 23400.940000, 3653.568105, 3653.568105, 0.000000, X, Y) && !ellipse(25007.752000, 22037.154000, 3826.920110, 3826.920110, 0.000000, X, Y) && !ellipse(23431.761000, 27388.390000, 3678.528106, 3678.528106, 0.000000, X, Y) && !ellipse(23486.524000, 22833.421800, 6480.288186, 4936.056142, 341.289000, X, Y) && !ellipse(22781.738000, 25780.100000, 5459.136157, 5459.136157, 0.000000, X, Y) && !ellipse(21515.876000, 24552.668000, 758.208022, 758.208022, 0.000000, X, Y) && !ellipse(24494.732600, 23759.920000, 1198.032034, 1198.032034, 0.000000, X, Y) && !ellipse(22912.048000, 23835.490000, 7808.016225, 7808.016225, 0.000000, X, Y) && !ellipse(22032.986000, 23729.604000, 7958.160229, 7958.160229, 0.000000, X, Y) && !ellipse(20515.376000, 28833.668966, 1183.752034, 1183.752034, 0.000000, X, Y) && !ellipse(21789.422000, 24298.090000, 1302.552037, 1302.552037, 0.000000, X, Y) && !ellipse(23734.006000, 20858.928000, 758.208022, 758.208022, 0.000000, X, Y) && !ellipse(22638.784000, 25032.216000, 1268.600037, 1268.600037, 0.000000, X, Y) && !ellipse(23531.610000, 24586.168000, 7653.840220, 7465.176215, 90.000000, X, Y) && !ellipse(21002.761337, 22366.746796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20515.020000, 24458.174000, 1415.960041, 1415.960041, 199.018000, X, Y) && !ellipse(24411.748596, 23196.310699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22585.308807, 20990.647766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27032.840000, 19194.842000, 1438.672041, 1438.672041, 0.000000, X, Y) && !ellipse(19367.238000, 20442.504000, 1540.504044, 1540.504044, 0.000000, X, Y) [Sat Aug 25 18:33:19 2012] Writing fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54.gif [Sat Aug 25 22:30:36 2012] Mean detx,y = (1062.28, -1046.09) [Sat Aug 25 22:30:45 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 25 22:33:05 2012] grppha failed [Sat Aug 25 22:33:05 2012] Setting source spectrum file to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54_src.pi.gz [Sat Aug 25 22:33:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54_bgd.pi.gz [Sun Aug 26 06:09:38 2012] Updating aperture counts using extracted products [Sun Aug 26 06:09:38 2012] Error reading totcts from fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54_src.pi.gz [Sun Aug 26 06:09:43 2012] No arf file for this source, not re-computing flux [Sun Aug 26 06:09:55 2012] Flag c found in src. 54 procflags, skipping spectral fitting [Sun Aug 26 06:09:55 2012] Source 54 has no response, skipping [Sun Aug 26 06:09:56 2012] xmm0412380401/analysis//spectral/fullrun_mos1_xmm0412380401_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete