[Sun May  6 08:20:27 2012] Detection parameters:
  Position = (214.5, 173.8) = 0 26 2.10 63 59 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 25.2
  Background counts = 244.3
  Rate = 0.005 +/- 0.0006

[Sun May  6 08:20:45 2012] Off-axis axis estimate = 10.89'
[Sun May  6 09:00:30 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:00:30 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Sun May  6 09:00:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 22, frac = 0.527
[Sun May  6 09:00:30 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 11.87"
[Sat May 12 17:35:34 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71.ximg exists
[Sat May 12 17:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71.csv
[Sat May 12 17:35:34 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71_1.ximg exists
[Sat May 12 17:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71.csv
[Sat May 12 17:35:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 17:35:36 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sat May 12 17:35:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sat May 12 17:35:37 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sat May 12 17:35:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sat May 12 17:35:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes