[Sun May  6 08:20:19 2012] Detection parameters:
  Position = (241.9, 287.0) = 0 25 44.15 64 7 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15106.6 +/- 160.6
  Background counts = 268.8
  Rate = 0.5 +/- 0.005

[Sun May  6 08:20:45 2012] Off-axis axis estimate = 4.18'
[Sun May  6 09:00:30 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:00:30 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sun May  6 09:00:30 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.827
[Sun May  6 09:00:30 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.52"
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23.csv
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23.csv
[Sat May 12 17:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 17:35:36 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat May 12 17:35:36 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat May 12 17:35:36 2012] Fit fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly