[Sun May  6 08:20:18 2012] Detection parameters:
  Position = (259.9, 301.1) = 0 25 32.21 64 8 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35365.8 +/- 225.3
  Background counts = 210.8
  Rate = 1 +/- 0.007

[Sun May  6 08:20:45 2012] Off-axis axis estimate = 2.80'
[Sun May  6 09:00:30 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:00:30 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun May  6 09:00:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Sun May  6 09:00:30 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.83"
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17.csv
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17.csv
[Sat May 12 17:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 17:35:35 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat May 12 17:35:35 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May 12 17:35:35 2012] Fit fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly