[Sun May  6 08:20:17 2012] Detection parameters:
  Position = (285.2, 308.0) = 0 25 15.41 64 9 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33249.2 +/- 227.9
  Background counts = 267.7
  Rate = 1 +/- 0.007

[Sun May  6 08:20:45 2012] Off-axis axis estimate = 1.19'
[Sun May  6 09:00:30 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:00:30 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Sun May  6 09:00:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Sun May  6 09:00:30 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.02"
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14.csv
[Sat May 12 17:35:33 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 12 17:35:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14.csv
[Sat May 12 17:35:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 17:35:35 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 12 17:35:35 2012] fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 12 17:35:35 2012] Fit fullrun_pn_xmm0412380301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly