[Sat May 11 14:19:20 2013] Detection parameters:
  Position = (316.9, 381.0) = 0 24 54.26 64 14 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 301.4 +/- 34.5
  Background counts = 416.2
  Rate = 0.02 +/- 0.002

[Sat May 11 14:19:28 2013] Off-axis axis estimate = 6.13'
[Sat May 11 14:36:33 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat May 11 14:36:33 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sat May 11 14:36:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.251
[Sat May 11 14:36:33 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 9.49"
[Tue May 14 18:12:01 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91.ximg exists
[Tue May 14 18:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91.csv
[Tue May 14 18:12:01 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91_1.ximg exists
[Tue May 14 18:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91.csv
[Tue May 14 18:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 18:12:04 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Tue May 14 18:12:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91.csv
[Tue May 14 18:12:04 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Tue May 14 18:12:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91.csv
[Tue May 14 18:12:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:03 2013] Warning, spatial fit 91 centroid is now closest to src. 50
[Tue May 21 15:10:03 2013] Source 99 is offset by -0.326561 and -8.075143 pixels which is larger than
2 X fitted extent = 1.974966 x 1.974966, not incorporating fit results
[Tue May 21 15:10:03 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:03 2013] Assessing source extent using major
[Tue May 21 15:10:03 2013] Source does appear to be extended
[Tue May 21 15:10:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 15:10:03 2013] Source is confused with source 103
[Tue May 21 15:10:59 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Tue May 21 15:10:59 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Tue May 21 15:10:59 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.251
[Tue May 21 15:10:59 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 9.49"
[Mon May 27 20:33:43 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71.ximg exists
[Mon May 27 20:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71.csv
[Mon May 27 20:33:43 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon May 27 20:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71.csv
[Mon May 27 20:33:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May 27 20:33:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:56:25 2013] Spatial fit model total counts = 5433.310000, observed total counts = 3771.000000
[Sun Jun  2 15:56:25 2013] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 15:56:25 2013] Spatial fit model total counts = 6258.020000, observed total counts = 5070.000000
[Sun Jun  2 15:56:25 2013] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 15:56:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:25 2013] Assessing source extent using major
[Sun Jun  2 15:56:25 2013] Source does appear to be extended
[Sun Jun  2 15:56:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 15:57:25 2013] XMMSAS src. selection expression = ellipse(27522.917236, 33096.540588, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 15:57:25 2013] Writing source region out to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_src.reg
[Sun Jun  2 15:57:25 2013] Extracting stamp from image fullrun_pn_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (279, 343) - (354, 418)
[Sun Jun  2 15:57:25 2013] XMMSAS bgd. selection expression = annulus(27522.917236, 33096.540588, 1087.500000, 2175.000000, X, Y) && !ellipse(26816.534800, 27966.734000, 7122.480205, 5520.000159, 46.929400, X, Y) && !ellipse(23836.464000, 29353.388200, 3871.704111, 3871.704111, 0.000000, X, Y) && !ellipse(24983.124800, 29259.211000, 3725.496107, 3725.496107, 0.000000, X, Y) && !ellipse(25910.573400, 28646.635000, 7268.208209, 5615.352162, 28.966000, X, Y) && !ellipse(25723.809800, 28183.756000, 3468.288100, 3468.288100, 0.000000, X, Y) && !ellipse(23011.540000, 28534.900000, 3854.232111, 3854.232111, 0.000000, X, Y) && !ellipse(26953.208000, 27478.524000, 6449.664186, 6449.664186, 0.000000, X, Y) && !ellipse(22322.170000, 23375.350000, 7992.000230, 7992.000230, 0.000000, X, Y) && !ellipse(27483.365265, 34580.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.002655, 35849.710388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.973450, 35622.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.518738, 32361.275360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.572266, 32226.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.946564, 31956.221436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.535004, 33825.431091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.356262, 33385.070587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.747131, 32582.059631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.245972, 32973.041901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27352.358154, 31698.380920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28672.125427, 30396.622711, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 15:57:25 2013] Writing fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99.gif
[Mon Jun  3 05:35:32 2013] Mean detx,y = (2600.05, 7789.92) 
[Mon Jun  3 05:35:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 05:36:35 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 05:36:36 2013] Setting source spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Mon Jun  3 05:36:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Wed Jun  5 10:19:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 10:19:38 2013] rmf not generated due to insufficient counts
[Sat Jun 15 13:43:46 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:43:46 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_src_b10.pi.gz = 3736.00
[Sat Jun 15 13:43:46 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_bgd.pi.gz = 710.00
[Sat Jun 15 13:43:46 2013] Got source and background scale factors 1177184.000000, 339757.000000
[Sat Jun 15 13:43:46 2013] User source parameters:
  Position = (316.9, 381.0) = 0 24 54.26 64 14 47.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1276.0 +/- 62.1
  Background aperture counts = 2460.0
  Rate = 0.04 +/- 0.002

[Sat Jun 15 13:43:46 2013] Updating counts from extracted products
[Sat Jun 15 13:43:46 2013] Set source signif. to 1276.00/49.60 = 25.73
[Sat Jun 15 13:44:02 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:44:02 2013] Using photon index=1.80, rate=0.0401, arf fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99.arf
[Sat Jun 15 13:44:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:44:03 2013] Updating source flux to 3.6e-13
[Sat Jun 15 13:47:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 13:48:17 2013] xmm0412380201/analysis//spectral/fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src99_pl.csv not found, spectral fit skipped or did not complete