[Sat May 11 14:19:17 2013] Detection parameters:
  Position = (243.5, 346.3) = 0 25 43.21 64 12 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 903.1 +/- 46.1
  Background counts = 243.2
  Rate = 0.04 +/- 0.002

[Sat May 11 14:19:28 2013] Off-axis axis estimate = 5.28'
[Sat May 11 14:36:33 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat May 11 14:36:33 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sat May 11 14:36:33 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.823
[Sat May 11 14:36:33 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 9.07"
[Tue May 14 18:12:01 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56.ximg exists
[Tue May 14 18:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56.csv
[Tue May 14 18:12:01 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue May 14 18:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56.csv
[Tue May 14 18:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 18:12:03 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue May 14 18:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue May 14 18:12:03 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue May 14 18:12:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue May 14 18:12:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:03 2013] Warning, spatial fit 56 centroid is now closest to src. 49
[Tue May 21 15:10:03 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:03 2013] Assessing source extent using major
[Tue May 21 15:10:03 2013] Source does appear to be extended
[Tue May 21 15:10:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 15:10:03 2013] Source is confused with source 52
[Tue May 21 15:10:59 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue May 21 15:10:59 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Tue May 21 15:10:59 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.823
[Tue May 21 15:10:59 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 9.07"
[Mon May 27 20:33:42 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54.ximg exists
[Mon May 27 20:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54.csv
[Mon May 27 20:33:42 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon May 27 20:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54.csv
[Mon May 27 20:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May 27 20:33:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:56:25 2013] Warning, spatial fit 54 centroid is now closest to src. 49
[Sun Jun  2 15:56:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:25 2013] Assessing source extent using major
[Sun Jun  2 15:56:25 2013] Source does appear to be extended
[Sun Jun  2 15:56:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 15:57:24 2013] XMMSAS src. selection expression = ellipse(21134.716293, 30078.335144, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 15:57:24 2013] Writing source region out to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_src.reg
[Sun Jun  2 15:57:24 2013] Extracting stamp from image fullrun_pn_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (206, 309) - (281, 384)
[Sun Jun  2 15:57:25 2013] XMMSAS bgd. selection expression = annulus(21134.716293, 30078.335144, 1087.500000, 2175.000000, X, Y) && !ellipse(26816.534800, 27966.734000, 7122.480205, 5520.000159, 46.929400, X, Y) && !ellipse(23836.464000, 29353.388200, 3871.704111, 3871.704111, 0.000000, X, Y) && !ellipse(24983.124800, 29259.211000, 3725.496107, 3725.496107, 0.000000, X, Y) && !ellipse(21547.927795, 28665.187836, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19467.565800, 24494.394200, 5252.808151, 3575.112103, 308.536000, X, Y) && !ellipse(20129.818237, 26592.926849, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25910.573400, 28646.635000, 7268.208209, 5615.352162, 28.966000, X, Y) && !ellipse(25723.809800, 28183.756000, 3468.288100, 3468.288100, 0.000000, X, Y) && !ellipse(23011.540000, 28534.900000, 3854.232111, 3854.232111, 0.000000, X, Y) && !ellipse(25054.448000, 26984.475000, 3382.632097, 3382.632097, 0.000000, X, Y) && !ellipse(26953.208000, 27478.524000, 6449.664186, 6449.664186, 0.000000, X, Y) && !ellipse(23615.409729, 26835.158447, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25561.900000, 26074.119600, 3221.472093, 3221.472093, 0.000000, X, Y) && !ellipse(22565.119965, 26150.848541, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21024.808000, 26023.100000, 4000.152115, 4000.152115, 0.000000, X, Y) && !ellipse(20495.152924, 25669.104095, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25855.983400, 25448.798000, 3163.296091, 3163.296091, 359.570000, X, Y) && !ellipse(24924.801600, 26131.906000, 3307.080095, 3307.080095, 0.000000, X, Y) && !ellipse(21572.076000, 24449.935200, 4092.720118, 4092.720118, 0.000000, X, Y) && !ellipse(23366.612244, 25447.632172, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22322.170000, 23375.350000, 7992.000230, 7992.000230, 0.000000, X, Y) && !ellipse(21970.210000, 22216.156000, 8074.272232, 8074.272232, 0.000000, X, Y) && !ellipse(19569.173400, 23826.546000, 4447.368128, 4421.568127, 65.242700, X, Y) && !ellipse(22220.049789, 29211.789337, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20783.974976, 29726.381805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20413.760345, 29230.682526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.416656, 32723.583313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21726.042000, 31012.598000, 1466.336042, 1466.336042, 0.000000, X, Y) && !ellipse(22133.523712, 31283.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18473.688000, 30329.042000, 1564.376045, 1564.376045, 0.000000, X, Y)
[Sun Jun  2 15:57:25 2013] Writing fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62.gif
[Mon Jun  3 04:52:07 2013] Mean detx,y = (5227.30, 1206.22) 
[Mon Jun  3 04:52:15 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 04:52:53 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 04:52:54 2013] Setting source spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Jun  3 04:52:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Wed Jun  5 10:08:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 10:08:58 2013] rmf not generated due to insufficient counts
[Sat Jun 15 13:43:34 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:43:35 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 6159.00
[Sat Jun 15 13:43:35 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_bgd.pi.gz = 1225.00
[Sat Jun 15 13:43:35 2013] Got source and background scale factors 1068120.000000, 671583.000000
[Sat Jun 15 13:43:35 2013] User source parameters:
  Position = (243.5, 346.3) = 0 25 43.21 64 12 12.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4210.7 +/- 79.5
  Background aperture counts = 1948.3
  Rate = 0.1 +/- 0.002

[Sat Jun 15 13:43:35 2013] Updating counts from extracted products
[Sat Jun 15 13:43:35 2013] Set source signif. to 4210.70/44.14 = 95.40
[Sat Jun 15 13:44:00 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:44:00 2013] Using photon index=1.80, rate=0.132, arf fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62.arf
[Sat Jun 15 13:44:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:44:00 2013] Updating source flux to 9.3e-13
[Sat Jun 15 13:47:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 13:48:17 2013] xmm0412380201/analysis//spectral/fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete