[Sat May 11 14:19:14 2013] Detection parameters:
  Position = (267.0, 280.8) = 0 25 27.46 64 7 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25191.8 +/- 197.3
  Background counts = 290.5
  Rate = 1 +/- 0.007

[Sat May 11 14:19:28 2013] Off-axis axis estimate = 2.61'
[Sat May 11 14:36:33 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat May 11 14:36:33 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Sat May 11 14:36:33 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.963
[Sat May 11 14:36:33 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.74"
[Tue May 14 18:12:00 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29.ximg exists
[Tue May 14 18:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29.csv
[Tue May 14 18:12:00 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue May 14 18:12:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29.csv
[Tue May 14 18:12:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 18:12:02 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue May 14 18:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue May 14 18:12:02 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue May 14 18:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue May 14 18:12:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:02 2013] Warning, spatial fit 29 centroid is now closest to src. 28
[Tue May 21 15:10:03 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:03 2013] Assessing source extent using major
[Tue May 21 15:10:03 2013] Source does appear to be extended
[Tue May 21 15:10:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 15:10:59 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue May 21 15:10:59 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Tue May 21 15:10:59 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.963
[Tue May 21 15:10:59 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 7.74"
[Mon May 27 20:33:42 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29.ximg exists
[Mon May 27 20:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29.csv
[Mon May 27 20:33:42 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May 27 20:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29.csv
[Mon May 27 20:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:33:44 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May 27 20:33:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 27 20:33:44 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 27 20:33:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 27 20:33:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:56:24 2013] Spatial fit model total counts = 113216.000000, observed total counts = 86860.000000
[Sun Jun  2 15:56:24 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 15:56:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:25 2013] Assessing source extent using major
[Sun Jun  2 15:56:25 2013] Source does appear to be extended
[Sun Jun  2 15:56:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 15:56:25 2013] Source is confused with source 36
[Sun Jun  2 15:57:21 2013] Counts = 25191.796875, rescaling region sizes by 3.000000
[Sun Jun  2 15:57:21 2013] XMMSAS src. selection expression = ellipse(23182.661194, 24377.296936, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Jun  2 15:57:21 2013] Writing source region out to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_src.reg
[Sun Jun  2 15:57:21 2013] Extracting stamp from image fullrun_pn_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (155, 168) - (380, 393)
[Sun Jun  2 15:57:21 2013] XMMSAS bgd. selection expression = annulus(23182.661194, 24377.296936, 9787.500000, 19575.000000, X, Y) && !ellipse(27833.783800, 27311.322600, 3539.688102, 3539.688102, 0.000000, X, Y) && !ellipse(26816.534800, 27966.734000, 7122.480205, 5520.000159, 46.929400, X, Y) && !ellipse(23836.464000, 29353.388200, 3871.704111, 3871.704111, 0.000000, X, Y) && !ellipse(24983.124800, 29259.211000, 3725.496107, 3725.496107, 0.000000, X, Y) && !ellipse(21547.927795, 28665.187836, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28266.326000, 25772.274000, 3506.040101, 3506.040101, 0.000000, X, Y) && !ellipse(27538.522000, 25105.544000, 3419.952098, 3419.952098, 0.000000, X, Y) && !ellipse(19467.565800, 24494.394200, 5252.808151, 3575.112103, 308.536000, X, Y) && !ellipse(20129.818237, 26592.926849, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27765.786000, 23103.596800, 3777.456109, 3777.456109, 0.000000, X, Y) && !ellipse(24879.859600, 21359.668400, 4047.840116, 4047.840116, 0.000000, X, Y) && !ellipse(25910.573400, 28646.635000, 7268.208209, 5615.352162, 28.966000, X, Y) && !ellipse(25723.809800, 28183.756000, 3468.288100, 3468.288100, 0.000000, X, Y) && !ellipse(23011.540000, 28534.900000, 3854.232111, 3854.232111, 0.000000, X, Y) && !ellipse(25054.448000, 26984.475000, 3382.632097, 3382.632097, 0.000000, X, Y) && !ellipse(26953.208000, 27478.524000, 6449.664186, 6449.664186, 0.000000, X, Y) && !ellipse(23615.409729, 26835.158447, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25561.900000, 26074.119600, 3221.472093, 3221.472093, 0.000000, X, Y) && !ellipse(22565.119965, 26150.848541, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21024.808000, 26023.100000, 4000.152115, 4000.152115, 0.000000, X, Y) && !ellipse(20495.152924, 25669.104095, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25855.983400, 25448.798000, 3163.296091, 3163.296091, 359.570000, X, Y) && !ellipse(24924.801600, 26131.906000, 3307.080095, 3307.080095, 0.000000, X, Y) && !ellipse(21572.076000, 24449.935200, 4092.720118, 4092.720118, 0.000000, X, Y) && !ellipse(23366.612244, 25447.632172, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27110.134521, 24746.922150, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25858.020050, 24790.246918, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22198.443161, 25026.685242, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20848.976000, 23688.782000, 4092.720118, 4092.720118, 0.000000, X, Y) && !ellipse(28389.888200, 23737.482000, 3716.592107, 3716.592107, 0.000000, X, Y) && !ellipse(27878.308000, 24762.294000, 3520.320101, 3520.320101, 0.000000, X, Y) && !ellipse(24630.278748, 24921.771759, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26216.998596, 23948.371643, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23092.199036, 23704.159393, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22322.170000, 23375.350000, 7992.000230, 7992.000230, 0.000000, X, Y) && !ellipse(24030.425323, 22849.356781, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22899.602600, 23012.370000, 3996.000115, 3996.000115, 0.000000, X, Y) && !ellipse(22534.566000, 22482.696000, 4037.136116, 4037.136116, 0.000000, X, Y) && !ellipse(25975.953800, 22738.820000, 3668.952106, 3668.952106, 0.000000, X, Y) && !ellipse(23725.846000, 22533.896000, 3805.560110, 3805.560110, 0.000000, X, Y) && !ellipse(25549.840179, 22103.569672, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21970.210000, 22216.156000, 8074.272232, 8074.272232, 0.000000, X, Y) && !ellipse(19569.173400, 23826.546000, 4447.368128, 4421.568127, 65.242700, X, Y) && !ellipse(26349.164000, 21002.938000, 4012.008115, 4012.008115, 0.000000, X, Y) && !ellipse(20456.479767, 22087.935532, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27024.260254, 22391.757172, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23255.630800, 22362.838000, 3912.048113, 3912.048113, 0.000000, X, Y) && !ellipse(22220.049789, 29211.789337, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27483.365265, 34580.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33989.984497, 30294.823578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20783.974976, 29726.381805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20413.760345, 29230.682526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31054.000000, 27151.128174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16944.841110, 22815.409576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15118.605759, 20728.604340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26620.685181, 19298.272354, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23830.416656, 32723.583313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36924.803436, 33004.533203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21134.716293, 30078.335144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31811.931213, 37747.841278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30173.881683, 37649.392792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29482.745697, 36871.100159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30344.308014, 36224.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28970.380798, 36351.277283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.002655, 35849.710388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.973450, 35622.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.518738, 32361.275360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.572266, 32226.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.946564, 31956.221436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35839.002655, 32041.559387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21726.042000, 31012.598000, 1466.336042, 1466.336042, 0.000000, X, Y) && !ellipse(31050.545807, 38555.291443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.535004, 33825.431091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.356262, 33385.070587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.917236, 33096.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.747131, 32582.059631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.245972, 32973.041901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27352.358154, 31698.380920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.523712, 31283.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28672.125427, 30396.622711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29158.853363, 29960.252716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18473.688000, 30329.042000, 1564.376045, 1564.376045, 0.000000, X, Y) && !ellipse(30633.010590, 26289.135742, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 15:57:21 2013] Writing fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29.gif
[Sun Jun  2 22:34:03 2013] Mean detx,y = (-151.91, -1561.97) 
[Sun Jun  2 22:34:16 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 22:47:53 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 22:47:54 2013] Setting source spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jun  2 22:47:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jun  4 22:20:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  4 22:20:38 2013] rmf not generated due to insufficient counts
[Sat Jun 15 13:43:12 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:43:12 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 581408.00
[Sat Jun 15 13:43:12 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 285870.00
[Sat Jun 15 13:43:12 2013] Got source and background scale factors 10597480.000000, 484987338.000000
[Sat Jun 15 13:43:12 2013] User source parameters:
  Position = (267.0, 280.8) = 0 25 27.46 64 7 31.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 575161.4 +/- 763.5
  Background aperture counts = 6246.6
  Rate = 2e+01 +/- 0.02

[Sat Jun 15 13:43:12 2013] Updating counts from extracted products
[Sat Jun 15 13:43:12 2013] Set source signif. to 575161.44/79.04 = 7277.28
[Sat Jun 15 13:43:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:43:56 2013] Using photon index=1.80, rate=18.1, arf fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29.arf
[Sat Jun 15 13:43:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:43:56 2013] Updating source flux to 9.4e-11
[Sat Jun 15 13:47:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 13:48:17 2013] xmm0412380201/analysis//spectral/fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete